Quick Guide

ManualsBrandsDOSMONO ManualsElectronicsDosmono Scanning pen

Scanning Pen

Instruction Manual

Summary Description: the scanning pen is an artificial intelligence product that integrate many

technologies such as picture splicing, OCR, translation, intelligent voice, ext. The efficiency of

solving problems is greatly improved in the scenes of re-study, overseas tourism, business office,

etc.

Power button:

1. Power On / Off: Long press the power button for more than 3 seconds to select on/ off or

restart the product.

2. Standby: short press the power button to unlock the screen or standby.

Volume button (shared with the voice button): press the red / blue button to adjust the sound

volume.

Return button: (common AI function key): short press the "round button" of the device or short

press the power button twice to return.

Touch screen: it supports clicking, sliding, and tapping the screen to select the required functions.

Red / blue voice button: it is the voice input button of voice translation function. Long press the

blue button to speak Chinese which automatically translate it into English; Long press the red

button to speak English which automatically translate it into Chinese.

Quick Guide:

First of all, thank you very much for using our AI products!

Preparations before using:

1. Power charging: please check whether the power of the device is sufficient before use it.

If the device cannot be started or shows lake of battery, please use the equipped charging line to

charge the device. It is best to charge for 1 hour or wait until the battery is sufficient before turn

on the device.

When the device is powered off, the screen will display the charging indication and the

percentage of power in about 8-10 seconds.

Charge the device when it is powered on, the battery logo in the upper right corner of the screen

will show with "lightning" mark.

Summary of content (7 pages)

PAGE 1
Scanning Pen Instruction Manual Summary Description: the scanning pen is an artificial intelligence product that integrate many technologies such as picture splicing, OCR, translation, intelligent voice, ext. The efficiency of solving problems is greatly improved in the scenes of re-study, overseas tourism, business office, etc. Power button: 1. Power On / Off: Long press the power button for more than 3 seconds to select on/ off or restart the product. 2.
PAGE 2
. Network connection: after the device is turned on, connect the network in the setting “WLAN” interface. It can be connected to WiFi or mobile hotspot which make the device more effective during online mode. 3.
PAGE 3
In the voice translation interface, long press the blue button to speak Chinese and automatically translate it into English; Long press the red button to speak English and automatically translate it into Chinese; The screen will automatically displays the results and read them out.
PAGE 4
information. 8. Pen holding direction: you can choose left / right hand pen holding according to your habits. Cautions 1. When upgrading the device, do not perform any operations during program download or automatic program installation. 2. Please connect to WIFI for better using experience; Some functions require networking. 3.
PAGE 5
1. Do not use this device in gas stations, fuel depots and other places where electronic equipment is prohibited, otherwise it may cause explosion or fire. 2. Please do not use unapproved or incompatible power supplies and chargers, which may cause fire, explosion or other hazards. 3. When charging is completed or not, please disconnect the charger from the device and unplug the charger from the power socket. 4.
PAGE 6
(3) Long-term exposure to strong light, fire or similar overheated environment. (4) Machine damage or performance failure caused by human factors such as water inflow. (5) Using unqualified power supply above 5V / 2A. FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 7
not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna.