Doro PhoneEasy 409s gsm ®
20 English 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Side key (volume) Display Left soft key Call key 1 / Voice mail Numeric keypad # End call/Power on/off Arrow keys Right soft key 11. Charging contacts, for use with charging stand (not included) 12. Emergency call key 13. Battery cover 14. Headset socket 15. Charging socket 16. Loudspeaker 17. Microphone 18. Led light (Battery level low) 19. Led light (New message) 20.
English Contents Installation . . . . . . . . . . . . . . . . . . . Installing the SIM card and battery . Charging . . . . . . . . . . . . . . . . . . . Phone indicators . . . . . . . . . . . . . . Operation . . . . . . . . . . . . . . . . . . . . . Activating the phone . . . . . . . . . . . Making a call . . . . . . . . . . . . . . . . Making a call from the Phonebook . Receiving a call . . . . . . . . . . . . . . Volume control . . . . . . . . . . . . . . . Display symbols . . . . . . . . . . . . . . . .
English Settings . . . . . . . . . . . . . . . . . Time and date . . . . . . . . . . . User setup . . . . . . . . . . . . . Tone settings (rings & tones) Silent. . . . . . . . . . . . . . . . . Blocking functions . . . . . . . Emergency . . . . . . . . . . . . . Voice mail . . . . . . . . . . . . . Speed dial . . . . . . . . . . . . . Call setup . . . . . . . . . . . . . . SMS settings . . . . . . . . . . . Network setup . . . . . . . . . . Services . . . . . . . . . . . . . . . Security settings . . . . .
English Installation Warning! Turn off the phone and disconnect the charger before removing the battery cover. Installing the SIM card and battery The SIM card holder is located behind the battery. 1. Remove the battery cover by pressing it carefully down and sliding away from the emergency call key. 2. Remove the battery if it is already installed. 3. Press lightly on the cardholder and carefully slide it towards the emergency call key. 4. The SIM card holder can now be folded into an upright position.
English Charging Warning! Only use batteries, charger and accessories that have been approved for use with this particular model. Connecting other accessories may be dangerous and may invalidate the phone’s type approval and guarantee. is displayed and a warning When the battery is running low, signal is heard. To charge the battery, connect the mains adapter to the wall socket and to the charging socket y. phone, and when it is disconnected.
English Save energy When you have fully charged the battery and disconnected the charger from the device, unplug the charger from the wall outlet.
English Operation Activating the phone Press and hold the red button on the phone to turn it on/off. The following messages may be displayed: SIM card missing or incorrectly inserted. SIM card damaged or not valid. If the SIM card is valid but protected with a PIN code (Personal PIN: is displayed. Enter the PIN code and press OK ( upper left corner of keypad). Delete with Clear ( upper right corner of keypad).
English Making a call 1. Enter the phone number. Delete with Clear. 2. Press q to dial. Press Abort to cancel dialling. 3. Press L to end the call. Note! When making international calls, press * twice for the ! "! # # $ % " code (instead of 00 or similar) for best operation. Making a call from the Phonebook 1. Press Name to open the phonebook. 2.
English Display symbols Signal strength Headset connected Ring only Battery level Ring + vibration New SMS Vibration only Silent Alarm active Roaming (in other network) SIM card missing Charger connected SIM card error Charger disconnected Mute Headset connected New SMS message Headset disconnected SOS calls only Handsfree on Handsfree off Query Warning Battery level low Error Calling Charging (animated) Incoming call Call ended Searching Missed call Progressing (
English Additional functions Call options During a call the soft keys1 give access to additional functions: Options (left soft key) A menu with the following options is displayed: Hold single call Hold the current call End single call End the current call (same as L) New call Call another number (three-party call) Phonebook Search the phonebook Msg centre Write or read SMS messages.
English Call waiting An alert tone will be heard if there is an incoming call while talking. To put the current call on hold and answer the incoming call, press Options. This service must be activated, see Settings/Call setup. Call information During a call, the called or calling phone number and the elapsed call time is displayed. If the identity of the caller is withheld, Unknown is displayed. Call log Answered, missed, and outgoing calls are saved in a combined call log.
English Phonebook The phonebook can store 100 entries with 3 phone numbers in each entry. Creating a phonebook entry and press OK. Press Menu, scroll to Select -New contact- and press Add. Enter a name for the contact, see & " . Delete with Clear. Use / to select Mobile, Home number or number, and enter the phone number(s), then press Save. 5. Press L to return to standby mode. 1. 2. 3. 4.
English Send SMS Press OK to write a SMS message, see SMS messaging. Top 10 setting " ! #$ phonebook. 1. Select one of the empty entries and press Add. 2. Use the arrow keys / to scroll through the phonebook, or quick search by pressing the key corresponding ! 3. Press OK to save the selected entry, or press Back to return to the menu. To delete a Top 10 entry, select the entry in the Top 10 list and press Options, then Delete.
English Storage Select SIM or Phone (default) and press OK to select the default storage for new phonebook entries. Phone 100 contacts with 3 phone numbers each Mobile, Home number or . SIM 1 phone number per contact. Number of entries and length of the phone numbers/contacts that can be stored will vary depending on SIM card. Send vCard Select Send by SMS and press OK to send the selected phonebook entry as a vCard via SMS.
English SOS calls As long as the phone is switched on, it is possible to place an SOS call by entering the main local emergency number followed by q. Some networks accept calls to SOS numbers without a valid SIM card. Contact your network operator for more information. Emergency Call key The Emergency Call function must be activated before use. See Settings on how to activate this function as described below or with 3 key presses, how to enter Emergency Numbers, and how to edit the emergency SMS message.
English Games 1. Press Menu, scroll to and press OK. 2. Select a game (e.g. Robot) then press OK for the following settings: Start game Press OK to start a new game. Game level " ! Best grades Shows your best results. Press Back to return to the menu or Reset to reset the scores. Help Shows instructions for the game. Press Back to return to the menu. OK. Alarm 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select On and press OK.
English Calendar 1. Press Menu, scroll to and press OK. 2. Select Options. 3. Select one of the following options and press OK. View tasks Show tasks for the selected date. Add task . 1. Enter a date for the task, then press 2. Enter a time for the task, then press . 3. Press Edit, enter a description for the task (see & " ), then press Done. 4. Press Save to save the task. At the recorded date/time, an alert tone will be played and the task description will be shown on the display.
English Text input Text is entered by pressing the numerical keys repeatedly to select characters. When writing SMS messages in some languages you can use the Smart ABC (eZiType™) input method which uses a dictionary to suggest words. See Settings on how to change input method. Entering text Press the key repeatedly until the desired character is shown. Wait a few seconds before entering the next character. Press * for a list of special characters. Select the desired character and press OK to enter it.
English SMS messaging Creating and sending SMS 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Write message and press OK. Type your message (see & " ) then press Done. Select one of the sending options below and press OK to Save and send Send the message and save it in the Outbox Send only Send the message without saving Send to many Add more recipients for the message If Send to many was selected, do the following: 1. Select Recipients and press OK. 2.
English Incoming SMS (Inbox) 1. Press Menu, scroll to and press OK. 2. Select Inbox and press OK. 3. Select a message from the list and press Read. Use / to scroll the message up/down. 4. Press Options, see 5" + + 676 15" $ 8. Outgoing SMS (Outbox) 1. Press Menu, scroll to and press OK. 2. Select Outbox and press OK. 3. Select a message and press OK. Use / message up/down. 4. Press Options.
English Call Press OK to call the contact. Delete Press Yes to delete the message, or No to return to the menu. Edit Edit the message, then press Done to show the sending options (see Creating and sending SMS). Forward (Inbox) Forward a message from your Inbox. Press Done to show the sending options. Delete all Press Yes to delete all messages in the Inbox. Press No to return to the menu. Use number Displays all phone numbers contained in the message as well as the number of the sender. 1.
English Settings Note! The settings described in this chapter are carried out in standby mode. Time and date Setting the time and date and press OK. 1. Press Menu, scroll to 2. Select Time & date and press OK. 3. Select Set time and press OK. 4. Enter the time (HH:MM), then press OK. 5. Select Set date and press OK. 6. Enter the date (DD/MM/YYYY), then press OK. Setting the time/date format and press OK. 1. Press Menu, scroll to 2. Select Time & date and press OK. 3. Select Set format and press OK. 4.
English To set the phone to automatically update the time and date according to the current time zone, select On. Automatic update of date and time does not change the time you have set for the alarm clock, calendar or the alarm notes. They are in local time. Updating may cause some alarms you have set to expire. User setup Language The default language for the phone menus, messages etc. is determined by the SIM card. You can change this to any other language supported by the phone. 1. 2. 3. 4.
English Owner number The phone numbers assigned to your SIM card are saved in Owner numbers if this is allowed by the card. To view/edit/delete the numbers: and press OK. 1. Press Menu, scroll to 2. Select User setup and press OK. 3. Select Owner number and press OK. See Phone book on how to add names/numbers. To edit or delete an existing entry, select it and press Options, then select Edit or Delete and press OK. LCD backlight Sets the delay time before the display backlight is turned off. 1. 2. 3. 4.
English Tone settings (rings & tones) Tone setup and press OK. Press Menu, scroll to Select Tone settings and press OK. Select Tone setup and press OK. Select Ring Tone and press OK. Select one of the available tones, the tone will be played. Press OK Back to discard changes. 6. Set up the Alarm, Opening tone, Closing tone, Message tone and Keypad tone in the same way. 1. 2. 3. 4. 5. Ringtone volume 1. 2. 3. 4. and press OK. Press Menu, scroll to Select Tone settings and press OK.
English Warning and error tones Warning and error tones are used to alert the user of low battery power, phone and SIM card errors, etc. 1. 2. 3. 4. 5. 6. and press OK. Press Menu, scroll to Select Tone settings and press OK. Select Extra tone and press OK. Select Warning and press On/Off to enable/disable it. Select Error and press On/Off to enable/disable it. Press Done to save. Silent " ' "*" while vibration and key tone settings are unchanged.
English Emergency Settings for the Emergency Call key function. See also Operation/Emergency call. and press OK. 1. Press Menu, scroll to 2. Select Emergency and press OK for the following settings: Activation Select one of the following options and press OK. Off Emergency call key disabled. On Normal Emergency Call key enabled. To activate, hold key for >3 seconds, or press 2 times within 1 second. On (3) Emergency Call key enabled. To activate, press key 3 times within 1 second.
English To edit or delete an existing entry, select it and press Options, then select Edit or Delete and press OK. Message The SMS text message to be sent when the Emergency Call key is pressed. Press Edit and enter text, then press OK to save. Alarm information Please read this important safety information before enabling the Emergency function: Be careful about including numbers with automatic answering in the call list, as the alarm sequence stops once the call is answered.
English Edit To edit an existing entry, select it and press Options, then select Edit and press OK. Delete To delete an existing entry, select it and press Options, then select Delete and press OK. Speed dial The numerical keys 0 and 2–9 can be used for speed dialling. Adding speed dial numbers and press OK. 1. Press Menu, scroll to 2. Select Speed dial and press OK. 3. Select 0 and press Add. 4. Select an entry from the phonebook and press OK. 5. Repeat to add speed dial entries for keys 2–9.
English Call setup Depending on network support and subscription. and press OK. 1. Press Menu, scroll to 2. Select Call setup and press OK for the following settings: Caller ID Controls display of your phone number on the recipients phone. Select an option and press OK. Set by network Use default setting by the network Hide ID Never show your number Send ID Always show your number Call waiting Select an option and press OK. See also Operation - Call waiting.
English Call barring The phone can be restricted to disallow certain types of calls. Note! To change these settings a password is needed. Contact your network operator to get the password. Outgoing calls Press OK then select: All calls User can answer incoming calls but not dial out. Internat. calls User can not call international numbers. Int. except home User can not call international numbers except to the country associated with the SIM card.
English Memory status Displays the percentage of memory space used in the SIM card and phone memory. Pref. storage 1. Select SIM to store messages on the SIM card, or Phone to store messages in the phone memory. 2. Press OK Predictive text (Smart ABC) 1. Press On to enable Smart ABC/eZiType™, see & " . 2.
English Network setup 1. Press Menu, scroll to and press OK. 2. Select Network setup and press OK. 3. Select one of the following options and press OK Automatic Network is selected automatically. Manual A list of available network operators is displayed (after a short delay). Select the desired operator and press OK. Services This menu may contain pre-programmed services from your network provider. Depending on network support and subscription. Security settings 1.
English Fixed dial (FDN) You can restrict calls to certain numbers saved on the SIM card. The list of restricted numbers is protected by your PIN2-code. Mode Select On/Off and press OK. Enter PIN2 and press OK Fixed numbers Press Options for the following settings: Add, Edit or Delete and press OK. Enter PIN2 and press OK Please note! : " ! ; ! % " $ ! ' * % " save 01234, allows calls to all numbers starting with 01234.
English Safety instructions Warning! The unit and the accessories can contain small parts. Keep all of the equipment out of the reach of small children. The mains adapter is the disconnect device between the product and mains power. The mains socket outlet must be close to the equipment and easily accessible. Operating environment Follow the rules and laws that apply wherever you are, and always turn off the unit whenever its use is prohibited or can cause interference or hazards.
English Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 15 cm be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker.
English Emergency calls Important! Mobile phones use radio signals, the mobile phone network, the terrestrial network and user-programmed functions. This means that connection cannot be guaranteed in all circumstances. Therefore, never rely only on a mobile phone for very important calls such as medical emergencies. Hearing aids This device should work with most hearing aid equipment in the market. However, full compatibility with all equipment can not be promised.
English RF exposure information (SAR) This model phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of Q " ` ^ "`^ % SAR limit set by the FCC is 1.6W/kg.
English FCC/INDUSTRY CANADA NOTICE This device complies with part 15 of the FCC Rules. This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
English Troubleshooting Phone cannot be switched on Battery charge low Connect the power adapter and charge the battery for 3 hours. Battery incorrectly installed Check the installation of the battery. Failure to charge the battery Battery or charger damaged Check the battery and charger. Battery recharged in temperatures < 0°C or > 40°C Improve the charging environment. Charger incorrectly connected to phone or power socket Check the charger connections.
English SIM card error SIM card damaged Check the condition of the SIM card. If it is damaged, contact the network operator. SIM card incorrectly installed Check the installation of the SIM card. Remove the card and reinstall it. SIM card dirty or damp Wipe the contact surfaces of the SIM card with a clean cloth. Failure to connect to network SIM card invalid Contact the network operator. No coverage of GSM service Contact the network operator. Signal too weak See Weak signal below.
English Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. [ Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. [ Do not use or keep the unit in dusty, dirty environments.
English Warranty and technical data This product is guaranteed for a period of 12 months from the date of purchase. In the unlikely event of a fault occurring during this period, please contact the place of purchase. Proof of purchase is required for any service or support needed during the guarantee period. This guarantee will not apply to a fault caused by an accident or a similar incident or damage, liquid ingress, negligence, abnormal usage, nonmaintenance or any other circumstances on the user’s part.
English This device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable EN 50332-1 standards. Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time. Logo Warning statement: A pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de l’utilisateur. Caution Risk of explosion if battery replaced aced by an incorrect type. Dispose of used batteries according to the instructions.
English 44
English (A3) Version 1.