User's Manual
Insert the SIM cards (required)
Remove the baery if it is already installed.
A. Insert the rst SIM card by gently sliding it
into the SIM1 card slot.
B. Insert the second SIM card by gently sliding
it into the SIM2 card slot.
Note! If you are using only one SIM card, we
recommend using SIM1 card slot. This device
accepts micro SIM or 3FF SIM card.
B
A
Enter text
• Press a numerical key repeatedly unl the
desired character is shown. Wait a few
seconds before entering the next character.
• Press
*
for a list of special characters.
Select the desired character with /
and press
OK
to enter it.
• Use
+
/
-
or
/ to move the cursor
within the text.
• Press
#
to cycle upper case, lower case and
numerals.
• Press and hold
#
to change wring
language.
In some languages you can use the input
method which uses a diconary to suggest
words.
1. Press
Menu
â
Settings
â
Messages
â
Predictive text
.
2. Select
On
to enable, or
Off
to disable.
3. Press
OK
to conrm.
The default language is determined by the SIM
card.
4. PHONEBOOK
The Phonebook can store 100 entries with 3
phone numbers in each entry.
Add contact
1. Press
Menu
â
Phonebook
â
-New contact-
â
Add
.
2. Enter a
Name
for the contact, see Enter
text. Delete with
Clear
.
3. Use / to select
Mobile
,
Home
or
Ofce
, and enter the phone
number(s) including the area code.
4. When done, press
Save
.
Doro 6060
Quick Start Guide
1. Earpiece
2. Display
3. Le selecon buon
4. Call buon
5. Top 10 shortcut
6. Voice mail
7.
*
Internaonal
prex/Symbols
8. Microphone
9.
#
Input method/
Silent
10. Camera shortcut
11. Message shortcut
12. End call /
Power on/o
13. Arrow buons
14. Right selecon
buon
15. External display
16. Camera ash/torch
17. Red light = Baery
level low/Charging
18. Green light = New
message/Missed call
19. Camera lens
20. Headset socket
21. Charging socket
22. Assistance buon
23. Loudspeaker
24. Volume control
25. Lanyard hold
(lanyard oponal)
26. Charging stand
(oponal)
Note!
All illustraons are for illustrave
purposes only and may not accurately depict
the actual device. The items supplied with your
phone might vary depending on the soware
and accessories available in your region or
oered by your service provider. You can obtain
addional accessories from your local Doro
dealer. The supplied accessories provide the
best performance with your phone.
For the full user manual, useful links and more
informaon please visit
www.doro.com/support/ or contact our Helpline.
1. GET STARTED
Be careful not
to damage your
ngernails when you
remove the baery
cover. Do not bend or
twist the baery cover
excessively as it may
be damaged.
Locate the SD card
holder and gently
slide the card in
the holder. The
device works with
or without a SD card
installed. Compable
card type: microSD,
microSDHC.
Insert the baery
by sliding it into the
baery compartment
with the contacts facing
downwards to the right.
Replace the baery cover.
Charge the phone
CAUTION
Only use baeries, charger and accessories
that have been approved for use with
this parcular model. Connecng other
accessories may be dangerous and may
invalidate the phone’s type approval and
guarantee.
When the baery is running low, is
displayed and a warning signal is heard.
• Connect the mains adapter to the wall
socket and to the charging socket
y
.
Tip: It is recommended to remove the
protecve plasc lm from the display to
enhance the visibility.
2. GET TO KNOW YOUR PHONE
1. Press and hold the red buon on the
phone to turn it on/o. Conrm with
Yes
to
power o.
2. If the SIM card is valid but protected with a
PIN code (Personal Idencaon Number),
PIN
is displayed. Enter the PIN code and
press
OK
. Delete with
Clear
.
Note! If PIN and PUK codes were not provided
with your SIM card, please contact your
service provider.
Attempts: #
shows the number of PIN aempts
le. When no more aempts remain,
PIN
blocked
is displayed. The SIM card must now
be unlocked with the PUK code (Personal
Unblocking Key).
1. Enter the PUK code and conrm with
OK
.
2. Enter a new PIN code and conrm with
OK
.
3. Re-enter the new PIN code and conrm
with
OK
.
Start-up wizard
When starng the telephone for the rst me,
you can use the start-up wizard to set some
basic sengs.
Tip: You can run the start-up wizard later if
you want.
The arrow (â) indicates next acon in step-by-
step instrucons. To conrm an acon, press
OK
. To select an item, scroll or highlight the
item using / and then press
OK
.
3. CALLS
Make a call
1. Enter the phone number including the area
code. Delete with
Clear
.
2. Press to dial. Press
Abort
to cancel
the call.
3. Press to end the call.
Note! For internaonal calls, always use
+
before the country code for best operaon.
Press
*
twice for the internaonal prex
+
.
1. Press
Name
to open the phonebook.
2. Use / to scroll through the
phonebook, or quick search by pressing the
key corresponding to the rst leer of the
name.
3. Press
Options
â
Call,
alternavely, press
to dial the selected entry, or press
Back
to return to standby.
1. Open the ip and press to answer.
Alternavely press
Silent
to switch o the
ringsignal or press /close the ip to
reject directly (busy signal).
2. Press to end the call.
Use
+
/
-
to adjust the sound volume during
a call. The volume level is indicated on the
display.
Silent
Silent is a xed prole with keypad tone,
message tone and ring tone disabled, while
vibraon, tasks and alarm are unchanged.
• Press and hold
#
to acvate and to
deacvate silent.
During a call the so keys ( ) give access to
addional funcons.
Speed dial
Use
0
and
2
–
9
to speed dial an entry from
standby.
• Press and hold the corresponding buon to
dial.
1. Press
Menu
â
Settings
â
Phonebook
â
Speed dial
.
2. Select
0
â
Add
and select an entry from
the phonebook.
3. Press
OK
to conrm.
4. Repeat to add speed dial entries for buons
2
–
9
.
SOS calls
As long as the phone is switched on, it is always
possible to place an SOS call by entering the
main local emergency number for your present
locaon followed by .
Call log
Received, missed, and dialled calls are saved in
a combined call log. 20 calls of each type can
be stored in the log. For mulple calls related
to the same number, only the most recent call
is saved.
1. Press .
2. Use / to scroll through the call log.
=
Received call
=
Dialled call
=
Missed call
3. Press to dial, or
Options
.
In the event of a trauma, it is crical to have
this informaon as early as possible to increase
the chances of survival. Add ICE contact to
improve your own safety. First responders
can access addional informaon such as
medicaon and next of kin from your phone in
case of an emergency. All elds are oponal,
but the more informaon provided the beer.
Press
Menu
â
Phonebook
â
ICE
.
1. Use / to scroll the list of entries.
2. Press
Edit
to add or edit informaon in each
entry. Delete with
Clear
.
3. Press
Save
when done.
5. ASSISTANCE BUTTON
The assistance buon allows easy access to
contact your predened help numbers should
you need help. Make sure that the assistance
funcon is acvated before use. See the full
manual on how to acvate, how to enter
recipients in the numbers list, and how to edit
the text message.
Make an assistance call
1. When help is needed, press and hold the
assistance buon for 3 seconds, or press it
twice within 1 second.
The assistance call begins aer a delay of
5 seconds. In this me you can prevent a
possible false alarm by pressing .
2. An assistance text message (SMS) is sent
to all recipients.The rst recipient in the list
is dialled. If the call is not answered within
25 seconds, the next number is dialled.
Dialling is repeated 3 mes or unl the call
is answered, or unl is pressed.
CAUTION
When an assistance call is acvated the phone
is pre-set to handsfree mode. Do not hold
the device near your ear when the handsfree
mode is in use, because the volume may be
extremely loud.
• Press
Menu
â
Settings
â
Assistance
.
See also “9. Response by Doro”.
6. MESSAGES
1. Press shortcut buon ,
or press
Menu
â
Messages
â
Create new
â
SMS.
2. Write your message, see Enter text, then
press
To
.
3. Select a recipient from
Phonebook
.
Alternavely, select
Enter number
to add
recipient manually and press
Done
.
4. Select
Add
to add more recipients.
You can modify the recipients by selecng
one and press
Options
â
Edit
/
Delete
/
Delete all
.
5. When done, press
Send
.
Both you and the recipient must have sub-
scripons that support picture message. The
sengs for picture message are supplied by
your service provider and can be sent to you
automacally via text message.
1. Press shortcut buon ,
or press
Menu
â
Messages
â
Create new
â
MMS
.
2. Write your message, see Enter text.
3. Press
Options
â
Add picture:
•
My pictures
to select a le.
•
Take picture
to use the camera to take a
picture.
Note! To keep best picture quality, send only
one picture per message.
You can also
Add sound
,
Add video,
and
Preview
MMS
using the
Options
menu.
4. Press
Options
â
Add subject
and enter
your subject, then press
Done
.
5. Press
Options
â
To
and select recipient
from
Phonebook
.
Alternavely, select
Enter number
to add
recipient manually and press
Done
.
6. Press
Add
to add more recipients.
7. Press
Send
to send.
• Press
Menu
â
Settings
â
Messages
.
English
3
4
5
6
14
21
13
11
10
7
1
8
12
9
20
22
23
24
19
18
17
15
2
16
25
www.doro.com
26