User's Manual
www.doro.com
Insert the SIM card
Insert the SIM card by gently
sliding it into the holder. Make
sure that the SIM card’s contacts
are facing inwards and that the
cut o corner is poinng down.
Take care not to scratch or bend
the contacts on the SIM card.
This device accepts micro SIM
or 3FF SIM card.
Insert the baery by sliding it into the baery
compartment with the contacts facing downwards
to the right. Replace the baery
cover.
3. CALLS
Make a call
1. Enter the phone number including the area
code. Delete with
Clear
.
2. Press to dial. Press
Abort
to cancel
dialling.
3. Press to end the call.
Note! For internaonal calls, always use
+
before
the country code for best operaon. Press
*
twice
for the internaonal prex
+
.
Make a call from the phonebook
1. Press
Name
to open the phonebook.
2. Use / to scroll through the phonebook,
or quick search by pressing the key correspond-
ing to the rst leer of the name.
3. Press
Call
to dial the selected entry, or press
Back
to return to standby.
Receive a call
1. Press to answer, or press
Silent
to switch
o the ring signal and then
Reject
to reject the
call (busy signal).
Alternately, press to reject the call
directly.
2. Press to end the call.
4. Press
Save
when done.
See Phonebook/ICE in the full manual.
6. ASSISTANCE BUTTON
The assistance buon allows easy access to contact
your predened help numbers should you need
help. Make sure that the assistance funcon is
acvated before use. See the full manual on how to
acvate, how to enter recipients in the numbers list,
and how to edit the text message.
Important!
Always inform recipients in the
Number list
that
they are listed as your assistance contacts.
Make an assistance call
1. When help is needed, press and hold the
assistance buon for 3 seconds, or press it twice
within 1 second.
The assistance call begins aer a delay of 5
seconds. In this me you can prevent a possible
false alarm by pressing .
2. An assistance text message (SMS) is sent to all
recipients.
3. The rst recipient in the list is dialled. If the call is
not answered within 25 seconds, the next number
is dialled. Dialling is repeated 3 mes or unl the
call is answered, or unl is pressed.
Doro 5030
Quick Start Guide
1. Earpiece
2. Le selecon buon
3. Call buon
4. Speed dials
5. Voice mail
6. Keypad lock
7. Silent /
Input method
8. Microphone
9. Torch shortcut
10. Message shortcut
11. End call /
Power on
/
12. Arrow buons
13. Right selecon
buon
14. Charging socket
15. Headset socket
16. Loudspeaker
17. Assistance buon
18. Baery cover
19. Lanyard hold
(not included)
Note!
All illustraons are for illustrave purposes
only and may not accurately depict the actual device.
The items supplied with your phone might vary
depending on the soware and accessories available
in your region or oered by your service provider.
You can obtain addional accessories from your local
Doro dealer. The supplied accessories provide the
best performance with your phone.
Full user manual
For the full user manual please visit
www.doro.co.uk/support/ or contact our Helpline.
1. GET STARTED
Be careful not to damage your ngernails when you
remove the baery cover. Do not bend or twist the
baery cover excessively as it may be damaged.
Charge the phone
CAUTION
Only use baeries, charger and accessories that
have been approved for use with this parcular
model. Connecng other accessories may be
dangerous and may invalidate the phone’s type
approval and guarantee.
When the baery is running low, is displayed
and a warning signal is heard.
• Connect the mains adapter to the wall socket
and to the charging socket
y
.
2. GET TO KNOW YOUR PHONE
1. Press and hold the red buon on the
phone to turn it on/o. Conrm with
Yes
to
power o.
2. If the SIM card is valid but protected with a PIN
code (Personal Idencaon Number),
PIN
is
displayed. Enter the PIN code and press
OK
.
Delete with
Clear
.
Note! If PIN and PUK codes were not provided with
your SIM card, please contact your service provider.
Tip: It is recommended to remove the protecve
plasc lm from the display to enhance the visibility.
shows the number of PIN aempts le.
When no more aempts remain,
PIN blocked
is
displayed. The SIM card must now be unlocked with
the PUK code (Personal Unblocking Key).
1. Enter the PUK code and conrm with
OK
.
2. Enter a new PIN code and conrm with
OK
.
3. Re-enter the new PIN code and conrm with
OK
.
Start-up wizard
When starng the telephone for the rst me,
you can use the start-up wizard to set some basic
sengs.
Tip: You can run the start-up wizard later if you
want.
The arrow (â) indicates next acon in step-by-step
instrucons. To conrm an acon, press
OK
. To select
an item, scroll or highlight the item using /
and then press
OK
.
Enter text
• Press a numerical key repeatedly unl the
desired character is shown. Wait a few seconds
before entering the next character.
• Press
*
for a list of special characters. Select
the desired character with / and press
OK
to enter it.
• Use / to move the cursor within the text.
• Press
#
to cycle upper case, lower case and
numerals.
• Press and hold
#
to change wring language.
You can lock the keypad to prevent the keys being
accidentally pressed.
• Press and hold
*
to lock/unlock the keypad.
1. Press
Menu
â
â
â
lock
:
•
select the me delay for
automac keypad locking.
•
Unlock mode
select
to unlock the
keypad with
*
alternavely with
to lock/unlock with right selecon buon
(
Name
/
Unlock
) and
*
.
2. Press
OK
to conrm.
Volume control
Use / to adjust the sound volume during a
call. The volume level is indicated on the display. See
also Audio setup in the full manual.
Silent
Silent is a xed prole with keypad tone, message
tone and ring tone disabled, while vibraon, tasks
and alarm are unchanged.
• Press and hold
#
to acvate/deacvate silent.
During a call the so keys ( ) give access to
addional funcons.
Speed dial
Use
A
–
B
,
0
and
2
–
9
to speed dial an entry
from standby.
• Press and hold the corresponding buon to dial.
Add speed dial numbers
1. Press
Menu
â
â
Calls
â
Speed dial
.
2. Select
A
â
Add
an select an entry from the
phonebook.
3. Press
OK
to conrm.
4. Repeat to add speed dial entries for buons
B
,
0
,
2
–
9
.
SOS calls
As long as the phone is switched on, it is always
possible to place an SOS call by entering the main
local emergency number for your present locaon
followed by .
Call log
Received, missed, and dialled calls are saved in a
combined call log. 20 calls of each type can be stored
in the log. For mulple calls related to the same
number, only the most recent call is saved.
1. Press .
2. Use / to scroll through the call log.
=
Received call
=
Dialled call
=
Missed call
3. Press to dial, or
.
4. PHONEBOOK
The Phonebook can store 100 entries with 3 phone
numbers in each entry.
Add contact
1. Press
Menu
â
Phonebook
â
-New contact-
â
Add
.
2. Enter a
Name
for the contact, see Enter text.
Delete with
Clear
.
3. Use / to select
Mobile
,
Home
or
, and enter the phone
number(s) including the area code.
4. When done, press
Save
.
5.
First responders can access important informaon
such as medical informaon from the vicm’s
phone in case of emergency. In the event of
a trauma, it is crical to have this informaon as
early as possible to increase the chances of survival.
All elds are oponal, but the more informaon
provided the beer.
1. Press
Menu
â
ICE
.
2. Use / to scroll the list of entries.
3. Press
Edit
to add or edit informaon in each
entry. Delete with
Clear
.
CAUTION
When an assistance call is acvated the phone is
pre-set to handsfree mode. Do not hold the device
near your ear when the handsfree mode is in use,
because the volume may be extremely loud.
Note! Some private security companies can accept
automac calls from their clients. Always contact
the security company before using their phone
number.
See Assistance sengs in the full manual.
7. MESSAGES
Create and send text messages
1. Press shortcut buon .
Alternavely press
Menu
â
Messages
â
Write
message
.
2. Write your message, see Enter text, then press
To
.
3. Select a recipient from
Phonebook
.
Alternavely, select
Enter number
to add
recipient manually and press
Done
.
4. Select
Add
to add more recipients.
You can modify the recipients by selecng one
and press
â
Edit
/
Delete
/
Delete all
.
5. When done, press
Send
.
8. BLUETOOTH
®
You can connect wirelesses to other Bluetooth
®
compable devices such as headsets or other
phones.
Important!
When you are not using Bluetooth
®
connecvity,
turn o
or
. Do not pair
with an unknown device.
®
1. Press
Menu
â
â
Bluetooth
â
â
On
.
2. Press
OK
to conrm.
1. Press
Menu
â
â
Bluetooth
â
â
On
.
2. Press
OK
to conrm.
Search device
1. Press
Menu
â
â
Bluetooth
â
Search
device
.
2. Select a device from the list and press
Bond
to
connect. If Bluetooth
®
is not enabled, press
Yes
to acvate.
3. Press
OK
to conrm.
9. SOUND & DISPLAY
Tone setup
1. Press
Menu
â
â
Sound
â
Tone setup
â
Ringtone
.
2. Use / to select one of the available melo-
dies, the melody will be played.
3. Press
OK
to conrm or
Back
to discard changes.
Text size
You can customise the text size for the menu and
messages.
1. Press
Menu
â
â
â
Text size
:
•
Normal
/
Large
2. Press
OK
to conrm.
Brightness
You can customise the brightness sengs. The
higher value, the beer contrast.
1. Press
Menu
â
â
â
Bright-
ness
:
•
Level 1-3
2. Press
OK
to conrm.
10. ADDITIONAL FUNCTIONS
Alarm
1. Press
Menu
â
Alarm
â
On
.
2. Enter the alarm me using the keypad and press
OK
to conrm.
• For a single occurrence, select
Single
.
• For a repeated alarm, select
Repeated
. Scroll
through the list of days and press
to
enable/disable the alarm for each day.
3. When done, press
Save
.
4. When the alarm goes o a signal will sound.
Press
Stop
to turn o the alarm or press
Snooze
to repeat the alarm aer 9 minutes.
Note! The alarm will work even when the phone
is switched o. Do not press
Yes
to power on if
wireless phone use is prohibited or when it may
cause interference or danger.
Torch
1. Press
Menu
â
Torch
.
2. Select
to turn o.
Tip: Press and hold shortcut buon to turn on the torch.
Release to turn o.
English
19
1
2
4
3
5
7
9
6
10
12
11
13
14
15
17
18
8
16