User Manual 1
Introduction © 2017. All rights are reserved. No part of this document may be reproduced without permission. While all efforts have been made to ensure the accuracy of all contents in this manual, we assume no liability for errors or omissions or statements of any kind in this manual, whether such errors or omissions or statements resulting from negligence, accidents, or any other cause. The contents of this manual are subject to change without notice.
Do not switch your handset on when the use of wireless devices is prohibited or when the wireless device may cause interference or danger. Do not use your phone while driving. Follow relevant rules or regulations in hospitals and health care facilities. Switch your phone off near medical devices. Switch your phone off in aircraft. The radio signal from it may cause interference in signals of the aircraft. Switch your phone off near high-precision electronic devices.
Do not place your phone and its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them. Do not put your phone in a high-temperature place or use it in a place with flammable gas such as a petrol pumps. Observe any laws or regulations on the use of phone. Respect others' privacy and legal rights when using your phone.
Phone code could prevent your phone from illegal use. The default phone code is 0000. Please change it to your own as soon as possible. Notes: Please remember the code; otherwise some service expense may happen. PIN and PUK PIN Code PIN code could prevent your UIM card from illegal use. When PIN is lock is on, you should enter the PIN code when powering on the handset again. The network provider offers you PIN code (four to eight digit).You should change PIN code as soon as possible for security.
Call Key Make or answer a call. Press the Call Key in standby mode to enter All Calls list. END key End an active or reject a call. Hold to Power On/Off. Exit from any interface to standby mode. Left soft key Enter main menu in standby mode. Select the correct option on a different interface Right soft key Enter all the contact in standby mode.
to mark & more. Search function enables you to find contacts quickly. You can assign contacts to the default caller groups. View the speed dial list and set the speed dial. Message Write message: From the main menu select “Write message” to create message. You can save your messages that you send often to “Save as draft”.
Camera 1. Operation path: Main menu> Multimedia>Camera. 2. Phone display as a viewfinder for the objects you need to shoot, click on the button, the phone will generate photo displayed on the screen. 3. Photo preview state, you can choose whether to delete the photos. 4. If you want to browse the photos of the operation to save, click the left soft key - Photo album. 5.
The preset password is 0000. Profiles: In order to use this phone in different scenarios, set personalized ring tones and phone tone. 1. Need to set the scene mode, press the [Left key] to open the parameter setting interface. 2. You need to set the type and settings, the setup is complete, save the set value. 3. When the phone returns profile list, select the profile, open the profile. Connection settings: The items are : Network account: Manage internet account, and support editor and delete.
4. After completing the settings, press the left soft key to save the information. Alarm The alarm can also be set for a specific time at a specific date loop start alarm. When the phone is set to silent or turned off, the alarm function is still available. Set the alarm 1. Path of operation: Main Menu> Organizer > Alarm. 2. The phone supports multiple alarm settings, use the up and down navigation keys you want to set the alarm, press the [key] to enter the alarm edit page. 3.
3. The state of being recorded, press the [Left key] to pause recording; press the right soft key to stop recording. 4. After the recording is finished, return to recording standby interface. 5. Select the recording folder View saved audio file Internet Internet is an application platform integrating wireless communication and Internet technology, which makes it possible for you to access to rich Internet information source and e-commerce application etc.
UIM card error UIM card metal surface dirt, UIM cards with a clean cloth to wipe the metal contact points. UIM card is not installed, the description of the UIM card is properly installed in accordance with the user manual. UIM card is damaged, contact your network service provider. Unable to connect to the network Weak signal to a strong signal to retry. Beyond the network coverage area of the network service provider. UIM card is invalid, contact your network provider.
Keep the phone the lower part of the microphone close to your mouth. Standby time is short Standby time and the network system is set, and may be in a poor reception region. When no signal is received, the phone will continue to launch in order to find the base station, consume a lot of battery power, resulting in shorter standby time. Please move to signal strong or temporarily turn off the phone. Need to replace the battery, replace the batteries with new ones.
Case Assembly Headset Data lines Charger Battery Package ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Note: SJ/T11363-2006 standard limit requirement: Cadmium C d ≦ 100ppm; lead Pb, mercury Hg, hexavalent chromium Cr6 +, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers of PBDEs ≦ 1000 ppm. 1.
FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
0.67 W/kg, and 0.69 W/kg respectively. The Max simultaneous SAR is 0.72W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly.