User Manual Model name:1100+ Trand name:doppio FCC ID:N2GDP1100PLUS 1
Table of Contents 1. 2. 3. 4. 5. 6. Security ................................................................................... 4 Getting Started ........................................................................ 6 2.1. Batteries ............................................................................. 6 2.1.1. Installing and uninstalling the battery ...................... 6 2.1.2. Charging the battery .............................................. 6 2.1.3. Using the battery ..................
7. Multimedia............................................................................. 11 7.1. Camera ............................................................................. 11 7.2. Video Recorder .................................................................. 11 7.3. Image Viewer .................................................................... 12 7.4. Audio Player ...................................................................... 12 7.5. Video .........................................
General Information Thank you for selecting our mobile phone. This user guide will provide you with the general information and operation instructions. The package includes a chargeable battery, a charger and other accessories. Please refer to the Accessory section for details. Note: ¾ Use only accessories approved by the phone manufacturer to ensure safety. Failing to comply with this will violate the terms and conditions of the warranty.
y y y y pre-paid phone card and credit card. Use the phone near land phone, television, radio and office automatic devices may cause interference and affect the function of the mobile phone. Keep the phone dry, all kinds of liquid can erode the electronic circuit. Keep the phone away from extreme temperatures. Keep the phone away from hot places where the temperature may exceed 60°C, such as the dash board, windowsill, near fire or a lighted cigarette. y Do not paint the phone.
and then use your phone. Please obey all the local traffic laws and regulations. y Normally the electronic systems in the vehicle should not be affected by the RF (Radio Frequency) signals from your wireless phone. However if you suspect any damage is resulting from the RF of your phone, contact your car dealer. Stop using your phone in the car until a qualified technician clears the problem. y Turn off your phone when in the gas station or any place where using wireless equipment is prohibited.
2.1.4. Battery level indicator When the phone is on, the battery level indicator is located at the upper right corner of the screen. 2.2. Connecting to the Network 2.2.1. SIM card Please insert available Subscriber Identity Module (SIM) card into your phone before using it. SIM card is supplied by your network carrier. All the information related to network connection is recorded on the SIM card, so are the contact information such as names, phone numbers and SMS that you set to store on the SIM.
2.2.4. Connecting to the network After the SIM card is unlocked, you phone will automatically search for the registered network or other local available network. Once connected, the name of the network carrier will appear on the top of the screen. You phone is now in Standby mode, ready for making and receiving call 2.3.
Note: You may transfer any incoming call to the Voice mail server (the number of caller to leave a message) by setting “Call Forwarding” 3.7. Option(Press option key to enter it) You can check the SMS Settings, MMS settings, push message, and Message capacity 4. Phonebook You can save a phone number in the memories of SIM cards or phone. Press RSK Key under the standby mode and then select Phonebook if you desire to enter in the function.
¾ ¾ ¾ ¾ ¾ ¾ Call divert: Divert an incoming call to a designated phone number under the presetting condition. This function can be launched or closed. Call waiting: The network will inform you for a newly incoming call during the call. Please contact with your network operator to launch or close the function because the function requires the network support. Call barring: Set up the right of calling and answering. This function requires the network support. You can launch or close the function.
y y Fixed dialing: Add the numbers for fixed dialing. Blacklist: You can check the blacklist in here, and also can set the feature whether need to act on calling or messaging. 6.5. User profiles Enter in the function; display the profile mode list including Normal, Silent, Meeting, Indoor, Outdoor, Earphone, Bluetooth, Driving Mode Select one mode and enter the option menu: ¾ Activate: Press OK key to activate the profile mode.
7.3. Image Viewer You can view the photos snapped with the camera through this function. Select a photo file and press
LSK Press to go to Options. RSK Press to stop the video and go back UP key Down key Press to go backwards. Press and hold to continuously go backwards. Press to go forwards. Press and hold to continuously go forwards. Press to volume down. 7.6. FM radio You y y y y y y y y y y can choose to read your options include: Auto search and save: Search and save the channels. Channel List: Play, edit or delete the saved channels. Save: Save current playing frequency into channel list.
y Add new schedule: Select Menu →Add new schedule→Write the schedule details →Select Store. 9.3. Calculator Press OK Key to view the calculation results. Press * key to enter the decimal point. Press the up, down, left, right and OK key to select +, -, *, /, = respectively. Press Clear to delete the figure. 9.4. Bluetooth ¾ ¾ ¾ ¾ ¾ ¾ Bluetooth: Open or close the Bluetooth Bluetooth visibility: Open or close the visibility.
Enter PUK code After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it. Contact your service provider. After seven consecutive incorrect PUK code entries, the SIM card cannot be used any more. Please contact your service provider to buy a new SIM card. 12.3. Care and maintenance Thank you for choosing our phone. Should you encounter any problem with the phone, please contact our dealer or qualified service provider.
This device was tested for typical body-worn operations with the back of the phone kept 0.5cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.5cm must be maintained between the user's body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain 0.
FCC RF Exposure requirements: The highest reported SAR values for head, body-worn accessory and simultaneous transmission conditions with the minimum separation distance of 0.5cm are 0.836W/kg, 1.205W/kg and 1.245W/kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.