Product summary: IP Video Door Station D11x The product "IP Video Door Station D11x" is a network/IP based video door station. Integrated Radio/Wireless modules: 2.4 GHz Wifi module, Bluetooth module, Radar sensor module with FCC ID 2ACUJR4266F2B Integrated Lamp: IR Light (12x IR LEDs) Power supply: 15 VDC or PoE IEEE802.3.af Network interfaces: Ethernet with cable Required certifications: CE (RED), ROHS 2.0, FCC (ID), IC (ID), REACH 201 (with 201 SVHC tests), 10 ROHS 2.
Base Data: IP Video Door Station D11x Product name / EUT name: IP Video Door Station Trademark: DoorBird Model Number / Name: D11x Prepared for: Bird Home Automation GmbH Address: Joachimsthaler Str. 12, 10719 Berlin, Germany Manufacturer: Bird Home Automation GmbH Address: Joachimsthaler Str.
Boards / Inner Components: IP Video Indoor Station A1101 8 Ohm Speaker Intercom Camera Image Sensor Board v1 With Image Sensor Sony IMX323 Block Diagram, Operational Description (Explanation of Block Diagrams) and BoM / Key components provided by: liaoxiaoli@hichip.net Intercom Camera Main Board v1 With Wifi Module Block Diagram, Operational Description (Explanation of Block Diagrams) and BoM / Key components provided by: liaoxiaoli@hichip.
Power supply: IP Video Door Station D11x Option 1 Any applicable certified (e.g. CE, UL..) power supply with 15 VDC @ 1 Ampere output, e.g. UT20 (available in different colors, e.g. white) or TEKA018-1501000XX Option 2 Any IEEE802.3.af conformal power supply (e.g. PoE injector / PoE Switch) Stand November 27 2019 – Confidential – © Bird Home Automation GmbH - Email: certlab-support@doorbird.
Putting into operation: IP Video Door Station D11x Network/IP Router Network cable or WiFi Network/IP Door station (Power supply: PoE IEEE802.3.af or 15 VDC) Easiest way to put the "IP Video Door Station D11x" into operation: - A Network/IP router - Free App "DoorBird", available at Apple App Store and Google Play Store If you need help/advice: please contact by email certlab-support@doorbird.com Stand November 27 2019 – Confidential – © Bird Home Automation GmbH - Email: certlab-support@doorbird.
Page Page 2-18 2-17 Installation Manual Installation Manual IP Video Video Door DoorStation Station D11x Series D11x Series Seite 19-35 18-34 Installationsanleitung Installationsanleitung IP Video Türstation D11x Serie D11x Serie Page 36-52 Manuel d‘installation Interphone vidéo IP Série D11x 1 D11x VERSION 1.3, 1.2, MIN. HW 1.
INSTALLATION MANUAL Read these instructions carefully before starting to use any components. Keep the manual so you can refer to it at a later date if required. If you hand over the device to other persons for use, please hand over the operating manual as well. You can always find the most up-to-date version of the installation manual on www.doorbird.com/support To make things easier we use the term “device” for the product “IP Video Door Station D11x series” and “mobile device” for a smartphone or tablet.
shock could result. • High voltage may be present internally. Do not open the device. Electric shock could result. • The device is not of explosion-proof. Do not install or use near gases or flammable materials. Fire or explosion could result. • Do not install two power supplies in parallel to a single input. Fire or damage to the device could result. Be sure to connect a single power supply to the device. • Do not connect any terminal on the device to an AC power line. Fire or electric shock could result.
• Keep the device more than 1 m (3.3‘) away from microwave, radio, TV, wireless router and any other wireless devices. • On devices with intercom or built-in speaker or built-in microphone or signal transmission functions, keep the wires more than 30 cm (12‘‘) away from AC 100-240 V wiring. AC induced noise and/or device malfunction could result. • Install the device in an area that will be accessible for future inspections, repairs and maintenance.
ENGLISH COMPONENTS* 1x Installation manual 1x Quickstart guide with Digital Passport 1x Main Electrical Unit with call button(s) and front panel 1x Back-housing with wall-mounting bracket 1x Drilling template 1x Waterproof A4 laser printer paper for labelling name plates 1x Power supply unit (mains adaptor) with four country-specific adaptors 1x RJ45 Adapter 1x Screw connection terminal plug Small parts * The sketches in this manual may differ from the purchased model.
DEVICE WITH 2 CALL BUTTONS Front Inside 1 2 3 4 5 WIFI 6 11 7 12 8 13 9 10 15 14 1) Front panel 2) HDTV Video 3) Security screws 4) Light Sensor For night-vision mode 5) Bluetooth tranceiver 6) Speaker 7) Microphone 8) 4D Motion sensor 9) First illuminated call button with nameplate 10) Second illuminated call button with nameplate 11) Diagnostic-LED Lights up a few seconds after connecting the device to power 12) Main Electrical Unit 13) Screw connection terminal 14) Gasket 15) Housin
1 Each individual step of the installation is clearly documented in the videos. All the steps below should be carried out carefully by a competent adult, taking into consideration any applicable safety regulations. Please contact us directly or seek the advice of a competent specialist. Please ensure that all wires used for the installation are undamaged along their entire length and approved for this type of use.
Only for D1101V & D1102V We offer additional wall-mounting kits for D1101V and D1102V Surface-Mount with a wedge corner wall-mount adapter (7.5° vertical down or up) and alternatively an angle corner wall-mount adapter (45° horizontal, mounts left or right). When choosing the assembly location, consider the lighting conditions. Avoid direct sunlight, direct backlight and reflective surfaces. N OTI CE N OTI CE A8001 Wedge corner wall-mount adapter (7.
ENGLISH 4.1 ASSEMBLING THE FRONT PANEL Remove the front panel with the attached Main Electrical Unit carefully from the mounting housing (backbox) using the screw driver provided. We have designed the front panel and safety screws in a way that they cannot be screwed through the front panel so that they do not fall off / get lost during installation. D1101V & D1102V D1101KH Turn the safety screws counter-clockwise until they are loose. Turn the safety screws counter-clockwise until they are loose.
Screw the wall-mounting bracket of the mounting housing to the wall. Flush-mounted models Surface-mounted models Please make sure that the outer frame of the flushmounted housing rests on the outside of the wall and that the edge of the flush-mounted housing is sealed all around against moisture from the outside. 5 NETWORK CONNECTION OPTIONS You can connect the device to the network by either using a WiFi 2.4 GHz connection (only for D1101V and D1102V) or a network cable.
ENGLISH 6 PREPARE POWER SUPPLY The device does not have a battery as power supply, therefore, choose one of the following options. OPTION 1 OPTION 2 To power the device using the provided mains adapter, 2 insulated wires are required. The power supply unit has a 300 cm (9.8 ft) long cable with two insulated wires. The network connection is then established via a network cable or alternatively via WiFi. To power the device via a PoE-Switch (e.g. D-Link DGS-1008P) or PoE-Injector (e.g.
OPTION 3 Power supply using a DIN rail power supply unit Alternatively to the mains adapter, we offer DIN rail power supplies in our online shop, which can be installed by a specialist. The network connection is then made via a network cable or alternatively via WiFi. 7 If you must power more than one device with one power supply, we recommend to use a PoE-Switch with PoE Standard IEEE 802.3af Mode A or an appropriate DIN rail power supply.
Description LAN/POE The device does not have an integrated standarized RJ45 socket to ensure ... • that the device rests as flat as possible on the wall. • that no wall needs to be levered up. • that a strong and inflexible Cat.6 or Cat.7 installation cable can be used. ENGLISH Port Use only four wires (1, 2, 3 and 6) of a standard Network cable Cat.5 or better, coming from the Internet Router/PoE-Switch/PoE-Injector. Cat.5 / Cat.
COM 1 Jack for authorized peripherals of Bird Home Automation which will be released in the future, e.g. keypad CB 2 Jack for second call button. CB 1 Jack for first call button. NOT I C E The jacks “CB1”, “CB2” and “COM1” on the rear side of the Main Electrical Unit must only be used to connect components certified by Bird Home Automation.
ACTIVATE THE DEVICE If the device is to be supplied with power by a mains adapter, plug the power adapter of the device into a wall socket. If the device is to be powered via PoE, switch on the PoE-Switch/ PoE-Injector which is connected to the device. If the device is to be powered via DIN-rail power supply, switch on the DIN-rail power supply. The Diagnostic-LED indicates whether the device is supplied with power.
CHANGING THE LABEL OF A CALL BUTTON NAMEPLATE Applies only to devices with 1 and more illuminated call buttons with nameplate. used roads. Please remove ferrous deposits immediately, as they will attack your door station and lead to real rust if not removed. To remove rust, simply wipe off the dust; in addition, a care product is recommended, e.g. WD 40, available e.g. at Amazon for less than € 5.00. Simply apply in a thin layer and rub in.
The device does not power up If the device is to be supplied with power by a mains adapter, plug the power adapter of the device into a wall socket. If the power adapter was already plugged into a wall socket, check if the cables and wires are correctly connected to the screw connection terminal. In most cases, removing the cable and wires from the screw connection terminal plug and reconnecting them to the screw connection terminal plug helps (loose contact).
LEGAL NOTES General remarks 1. DoorBird is a registered trademark of Bird Home Automation GmbH. 2. Apple, the Apple logo, Mac, Mac OS, Macintosh, iPad, Multi-Touch, iOS, iPhone and iPod touch are trademarks of Apple Inc. 3. Google, Android and Google Play are trademarks of Google, Inc. 4. The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. 5. All other company and product names may be trademarks of the respective companies with which they are associated. 6.
INSTALLATIONSANLEITUNG Lesen Sie diese Anleitung sorgfältig, bevor Sie die Komponenten in Betrieb nehmen. Bewahren Sie die Anleitung zum späteren Nachschlagen auf! Wenn Sie das Gerät anderen Personen zur Nutzung überlassen, übergeben Sie auch diese Bedienungsanleitung. Zur Vereinfachung der Begriffe verwenden wir „Gerät“ für das Produkt „IP Video Türstation D11x“ sowie „mobiles Endgerät“ für ein Smartphone/Tablet. Haftung Die Erstellung dieses Dokuments wurde sorgfältig vorbereitet.
WARNUNG Plastikfolien/-tüten, Styroporteile etc. können für Kinder zu einem gefährlichen Spielzeug werden. • Verlegen Sie Kabel stets so, dass diese keine Gefährdungen für Menschen und Haustiere darstellen. • An Teilen im Gerät liegt Spannung an. Berühren Sie keine Teile, die nicht mit der Installation, der Verdrahtung oder dem Anschluss verbunden sind. Elektrische Stromschläge können die Folge sein.
• Geräte, die als wetterfest gekennzeichnet sind, nicht mit Hochdruckwasser besprühen. Gerätestörungen können die Folge sein. Sicherheitsanweisungen NOT I C E • Die Verwendung des Geräts muss unter Beachtung der örtlich geltenden rechtlichen Bestimmungen erfolgen. • Lagern Sie das Gerät in einer trockenen und belüfteten Umgebung. • Achten Sie darauf, dass das Gerät weder Stößen noch starkem Druck ausgesetzt ist. • Installieren Sie das Gerät nicht an instabilen Halterungen, Oberflächen oder Wänden.
KOMPONENTEN* 1x Elektrische Haupteinheit mit Ruftaste(n) und Frontblende 1x Bohrschablone 1x RJ45 Adapter 1x Montagerückgehäuse mit Wandmontagehalterung 1x Wasserfestes A4 Laserdrucker-Papier für die Beschriftung einer Namensschildtaste 1x Grüner Schraub anschlussklemmen stecker 1x Installationsanleitung 1x Quickstartanleitung mit Digital Passport 1x Steckernetzteil (110 - 240 V AC auf 15 V DC) mit 4 Landesadaptern Kleinteile * Die Zeichnungen in dieser Anleitunge
GERÄT MIT 2 RUFTASTEN Vorderseite 1 2 4 5 W-LAN 11 6 12 7 8 DEUTSCH 3 Innenseite 13 9 15 14 10 1) Frontblende 2) HDTV Video 3) Sicherheitsschrauben 4) Lichtsensor Für den Nachtsichtmodus 5) Bluetooth-Transceiver 6) Lautsprecher 7) Mikrofon 8) 4D Bewegungssensor 9) Erste beleuchtete Ruftaste mit Namensschild 10) Zweite beleuchtete Ruftaste mit Namensschild 11) Diagnose LED Leuchtet nach ein paar Sekunden auf nachdem das Gerät mit dem Strom verbunden wurde 12) Elektrische Haupteinheit
1 Schalten Sie den Strom sämtlicher zum Montageort führenden Leitungen ab, d.h. z.B. den Strom für die Türstation, den Türgong, elektrischen Türöffner, PoE-Switch/PoE-Injektor etc. INSTALLATION Alle folgenden Schritte sollten von einem fachkundigen Erwachsenen sorgsam und unter Berücksichtigung sämtlicher geltender Schutzvorschriften durchgeführt werden. Sollten Sie Fragen haben, wenden Sie sich bitte direkt an uns oder einen kompetenten Fachmann.
Nur bei D1101V und D1102V! Alternativ sind Wandmontage-Kits mit einem EckKeil- (7.5° vertikal nach oben oder unten) und einem Eck-Winkel-Wandmontageadapter (45° horizontal, links oder rechts montierbar) für D1101V und D1102V separat erhältlich. N OT I C E Das Produkt ist als Auf- und Unterputzvariante verfügbar. Bei der Unterputzvariante ist die Frontblende etwas größer, damit das Loch in der Wand besser abgedeckt ist und das Rückgehäuse besteht statt aus Plastik vollständig aus Metall.
4.1 Entfernen der Frontblende Entfernen Sie die Frontblende mit der Haupteinheit vorsichtig mit dem mitgelieferten Schraubendreher vom Montagerückgehäuse. Die Frontplatte und die Sicherheitsschrauben sind so konstruiert, dass sie nicht aus der Frontplatte herausgeschraubt werden können. Dadurch fallen sie bei der Montage nicht heraus/kommen abhanden. D1101V & D1102V D1101KH Drehen Sie die Sicherheitsschrauben gegen den Uhrzeigersinn, bis sie sich lösen.
