Technical Specs

ManualsBrandsDoodle Labs ManualsElectronicsSmart Radio

Doodle Labs Smart Radio – RM-2450

Advanced MIMO Mesh Router

Smart Radio Overview

The Smart Radio is an advanced 2×2 MIMO mesh router designed for easy plug & play

integration. The tiny module carries all bi-directional communication (e.g. Telemetry, Video) in a

single high-speed broadband RF channel.

Due to its very low SWaP-C (Space, Weight and Power and Cost), the Smart Radio is very popular

for mobile IIoT (Industrial Internet of Things) applications like drones, autonomous vehicles, and

mobile robotics applications across various industries.

Embedded

Summary of content (9 pages)

PAGE 1
Doodle Labs Smart Radio – RM-2450 Advanced MIMO Mesh Router Smart Radio Overview Embedded The Smart Radio is an advanced 2×2 MIMO mesh router designed for easy plug & play integration. The tiny module carries all bi-directional communication (e.g. Telemetry, Video) in a single high-speed broadband RF channel.
PAGE 2
Technical Specifications (RM-2450) Model Category Xtreme ORDERING CODES Radio Configuration 2x2 MIMO RM-2450-2J-XM (Embedded, Industrial temp) Model # (v3 hardware) RM-2450-2J-XM-C (Embedded, Commercial temp) Evaluation Kit EK-2450-2J (Ethernet board for Embedded model) Design-In Documentation https://www.doodlelabs.com/technologies/technical-library/ PERFORMANCE OVERVIEW Protocol Compatibility Fully compatible with 2.4GHz (IEEE 802.
PAGE 3
Model Category Xtreme Channel Sizes (Software Selectable) 20, 40 MHz Radio Data Rate (Modulation Coding Scheme – MCS) Dynamic Link Auto Adaptation Antenna Signal Strength -25 to -85 dBm (Recommended), Absolute Maximum= +12 dBm Receiver LNA Gain >10 dB RF Power Control In 1dB steps, Tolerance +/-1dB Integrated Antenna Port Protection Able to withstand open port, >10 KV (contact) and >15KV (open air discharge) as per IEC-61000-4-2 Wireless Error Correction FEC, ARQ Frequency Accuracy ±10 ppm
PAGE 4
Model Category Xtreme Dimensions 65 x 57 x 12 mm, 78 grams (Embedded) Interfaces 2x RJ45, UART, USB, 2x GPIO Antenna Connection 2x MMCX-Female (Embedded) Host Interface (Embedded) 2x Ethernet (100 Base-T) and UART (3.3V FT234XD chipset) OR USB 2.
PAGE 5
Model Category Xtreme Regulatory Requirements Designed and verified to meet various regulatory requirements. Formal testing and approval are required for the Integrator’s antenna type. The Integrator is responsible for obtaining all regulatory approvals in target markets for the finished product. RoHS/WEEE Compliance Yes. 100% Recyclable/Biodegradable packaging * Specifications are subject to change without prior notice.
PAGE 6
FCC Regulatory Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 7
A host product itself is required to comply with all other applicable FCC equipment authorization regulations, requirements, and equipment functions that are not associated with the transmitter module portion. For example, compliance must be demonstrated: to regulations for other transmitter components within a host product; to requirements for unintentional radiators (Part 15 Subpart B), such as digital devices, computer peripherals, radio receivers, etc.
PAGE 8
RF exposure statement: This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
PAGE 9
Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.