User's Manual

ManualsBrandsDoodle Labs ManualsElectronicsWi-Fi Radio Transceiver

NM-DB-3

Rugged/Military grade 2.4/5 GHz 3x3 MIMO Wi-Fi® Radio Transceivers

Features

 Qualcomm-Atheros AR9590-AR1B Chipset with Extended Temperature Range

 Up to 450 Mbps Throughput with 3x3 MIMO Technology

 Calibrated High Power 2.4 GHz and 5 GHz operation for Extended Range

 802.11 Dynamic Frequency Selection (DFS) in AP and Client mode

 Supported Ath9k Linux Driver

 MiniPCIE Interface

User Manual

Summary of content (5 pages)

PAGE 1
User Manual NM-DB-3 Rugged/Military grade 2.4/5 GHz 3x3 MIMO Wi-Fi® Radio Transceivers Features       Qualcomm-Atheros AR9590-AR1B Chipset with Extended Temperature Range Up to 450 Mbps Throughput with 3x3 MIMO Technology Calibrated High Power 2.4 GHz and 5 GHz operation for Extended Range 802.
PAGE 2
TECHNICAL SPECIFICATIONS Model No. NM-DB-3 Qualcomm Atheros MAC Chipset QCA9590-AR1B with Extended Temperature range for Outdoor and Rugged models) Linux Drivers Software Support ath9k 5.180 GHz ~ 5.825 GHz Center Frequency Range 2.412 GHz ~ 2.462 GHz This varies by the regulatory domain Channel Bandwidth* 20, 40 MHz channels Radio Modulation (Dynamic BPSK, QPSK, 16 QAM, and 64 QAM (5.x GHz) Link Adaptation) CCK, BPSK, QPSK, 16 QAM, and 64 QAM (2.4 GHz) 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps (5.
PAGE 3
802.11n, MIMO 16 QAM 3/4 26.84 -82 802.11n, MIMO 64 QAM 5/6 26.84 -72 2.4 GHz (40 MHz Channel) 802.11n, MIMO BPSK 1/2 26.94 -90 802.11n, MIMO 16 QAM 3/4 26.94 -79 802.11n, MIMO 64 QAM 5/6 26.94 -70 Note 1 It is advantageous to use the smallest Channel Bandwidth that can support the Throughput requirements. Smaller bandwidths provide more channels to choose and help avoid interference issues. The system’s SNR is higher at smaller Channel Bandwidths and Range is longer.
PAGE 4
Dimensions Regulatory Requirements FCC ID CE/ETSI Industry Canada (IC) RoHS/WEEE Compliance 30 x 50 x 7 mm, 14 grams Mechanical drawing and 3D-CAD files available upon request Designed and Verified to meet various regulatory requirements. Formal testing and approval is required based on the Integrator’s particular host platform and antenna type. The Integrator is also responsible for obtaining all required regulatory approvals in target markets for the finished product. 2AG87NM-DB-3 Q3 2016 Q3 2016 Yes.
PAGE 5
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.