User Manual ACM-DB-3 Rugged/Military grade 2.4/5 GHz 3x3 MIMO Wi-Fi® Radio Transceivers Features Qualcomm-Atheros QCA9890-BR4B Chipset with Extended Temperature Range Up to 1.3 Gbps Throughput with 3x3 MIMO Technology Calibrated High Power 2.
Installation and Usage The ACM-DB-3 has been FCC certified for indoor usage with Superbat 3-dBi rubber-duck antennas (WA2-1321S02SP1-030 in the 5-GHz bands, and WA2-995-S02SP1-030 antennas in the 2.4GHz band). The ACM-DB-3 mates with a standard PCIE-mini slot and integrates with the Ath10k software driver which is pre-installed in Linuxbased systems.
TECHNICAL SPECIFICATIONS Model No. ACM-DB-3 (Rugged/Military Applications, 802.11ac) MAC Chipset QCA9890-BR4B with Extended Temperature range for Outdoor and Rugged models) Software Support Open Source Linux Driver ath10k OpenWRT (Wireless Router/Linux OS) Center Frequency Range 5.180 GHz -5.240 Ghz & 5.745 GHz -5.825 Ghz 2.412 GHz ~ 2.484 GHz This varies by the regulatory domain Channel Bandwidth/(No. of Non-overlapping Channels)* 20/(9), 40/(4) and 80/(2) MHz channels (5.
802.11ac, VHT40, 3 Streams MCS8 256 QAM 405 23.99 -68 802.11ac, VHT40, 3 Streams MCS9 256 QAM 429 23.99 -66 802.11ac, VHT80, 3 Streams MCS0 BPSK 76 23.69 -87 802.11ac, VHT80, 3 Streams MCS2 QPSK 223 23.69 -81 802.11ac, VHT80, 3 Streams MCS4 16 QAM 404 23.69 -72 802.11ac, VHT80, 3 Streams MCS7 64 QAM 622 23.69 -66 802.11ac, VHT80, 3 Streams MCS8 256 QAM 686 23.69 -64 802.11ac, VHT80, 3 Streams MCS9 256 QAM 789 23.69 -62 802.
Suppression RF Power control by Driver In 0.5 dBm steps. Accuracy of power calibration ±2 dBm RF Hardware Disable Pin 20 of miniPCI-E interface. (Required for FAA compliance) Control for External Power Amp Available as an optional configuration Spectral Analysis 8 bit resolution spectral FFTs available for software analysis PHYSICAL, ENVIRONMENTAL AND OTHER SPECIFICATIONS Antenna Ports 3 Ports (50 Ohms) with MMCX connectors. Optional configuration with U.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.