User's Manual

ManualsBrandsDONNER ManualsElectronicsPodcast Workstation

Table Of Contents

空白页面

Donner Podcast Workstation PC-02

User Manual

Thank you for choosing Donner Podsoler All-in-One Podcast Workstation PC-02!

Please read this instruction manual carefully before using this product.

Be sure to save these instructions for future reference.

Introduction

Donner PODSOLER is an all-in-one podcast workstation designed for live streaming &

content creators. With the innovative exclusive algorithm and 4 XLR Mic inputs, it supports

up to four podcasters to record the program at the same time. Combined with the available

motor faders and independently controlled monitors for a better podcast experience. It also

comes with 9 customized programmable pads for instant playback of 10 sound effects and

samples, which get more fun. Furthermore, a quick connection to the phone, USB, and

Bluetooth sources is provided. Podcasts can be recorded directly to a micro SD card, or to

PC/MAC via USB. A more professional podcast workstation is assured and suited to create

multiple application scenarios: Live streaming, band performances, talk shows, gaming, and

music shows.

Important Safety Instructions

● Please use the AC adapter which supplies 12V DC by this product.

● To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

● Please turn off the power supply and pull out the power cord when the product is not in

use for an extended period of time.

● Make sure that the power is off when connecting or cutting off the power cord.

● Do not place the product near the strong magnetic field.

● Please do not disassemble or modify this product so as to avoid the danger of fire and

electric shock.

● Do not store it in the following environments: Direct sunlight, high temperature, excessive

humidity, excessive dust, and strong vibration.

● Do not clean the product with thinners, alcohol, or similar chemicals to avoid

discoloration.

● Donner is not responsible for damage caused by improper use or modifications to the

device.

Summary of content (14 pages)

PAGE 1
Donner Podcast Workstation PC-02 User Manual Thank you for choosing Donner Podsoler All-in-One Podcast Workstation PC-02! Please read this instruction manual carefully before using this product. Be sure to save these instructions for future reference. Introduction Donner PODSOLER is an all-in-one podcast workstation designed for live streaming & content creators. With the innovative exclusive algorithm and 4 XLR Mic inputs, it supports up to four podcasters to record the program at the same time.
PAGE 2
Features ● Integrated all-in-one podcast solution ●… Microphone/Instrument inputs come with four XLR connectors and built-in Preamp with 50dB gain. ● Stereo high-quality headphone outputs with four 6.35mm jacks and support high impedance headphones. ● Industry-leading Audio Interface solution: sampling rate XXX, signal to noise ratio XXX, providing first-class sound quality.
PAGE 3
Name of Parts Front Panel ① Phones Knob 1-4 Adjust the output levels of headphones. Press the knob to select the headphone channel and balance the volume of each channel. ② Motor Fader 1-4 Adjust the volume of each channel. The fader will display the volume of the main output in the mixer mode The fader will display the volume of the headphone sending volume of each channel in the monitor mode. The E channel will display the volume of the sampler by default.
PAGE 4
Display input level, main output level, and status parameter of each channel ⑨ Mixer Button Press to display the mixer setting on the screen. ⑩ Select Button Press to select the channel in the mixer display. Press to switch the main channel (4-channel analog mono input) and sub-channel (4channel stereo external input) 11. Effect Button Press to enter select effects. Use the Value knob to select or turn on/off the effect units. The effect name will be lighted if the effect is turned on. 12.
PAGE 5
Rear Panel ① Power Supply and Power Button Press the power button to turn the unit off. ② MicroSD Slot MicroSD slot for direct recording. ③ Game Optical Port Optical port for connecting the PS4/Xbox devices. ④ USB-C Port Use this to connect the PC/MAC/IOS/Android devices. ⑤ Main Out for Headphones (耳机？) Main volume output for connecting the headphones. (接口是 TRS 6.3mm?) ⑥ Main Out for TRS Balanced L/R Main volume output for connecting the monitor speakers.
PAGE 6
Connection Operation Connecting audio equipment Caution Please adjust knobs and faders on this unit to a minimum before connecting audio equipment. Failure to do may cause sudden loud noises from monitoring equipment, and this could damage the equipment or harm hearing.
PAGE 7
Connecting microphones/musical instruments ① ② ③ Step 1: Connect your microphone to the XLR Input 1-4 jacks on the back using a standard XLR cable (not supplied). Or connect your musical instrument to the XLR Input 1-4 jacks on the back using a standard TRS cable (not supplied). Step 2: After connecting them, the screen will pop up the corresponding channel input settings. Please select your device and complete the level settings as prompted.
PAGE 8
Connecting the Windows and Mac Devices Step 1: Connect your PC/MAC to the USB jack on the back using a supplied USB cable. (知道是什么接口的吗） Step 2: Push up the channel fader slowly to adjust the volume. Connecting the Game Consoles and Blu-ray Players Step 1: Connect your gaming consoles to the OPTICAL port on the back using an optical cable (not supplied). Step 2: Push up the channel fader slowly to adjust the volume.
PAGE 9
Connecting to Monitor Headphones and Monitor Speakers Step 1: Make sure to adjust the knob on this unit to a minimum before connecting audio equipment. Step 2: Connect your monitor headphones/ monitor speakers to the Main out jacks on the back using a 6.35mm audio cable (not supplied). Step 3: Rotate the knob slowly to adjust the volume.
PAGE 10
Sampler Operation With 27 sample pads (9x3Banks) on the Donner's Podsoler, you can play the preset sound and flexibly record new samples you like during a podcast. It is convenient for players to use and especially adds super fun to the podcast. 1. This machine has 9 preset sound effects that have been saved by default in Bank 1. Press the corresponding PAD to use it directly. 2.
PAGE 11
Effect Setting Donner's FX Multieffector allows you to process your main channel input signal, which supports up to 10 effects per channel, greatly optimizing your voice or instrument effects and getting great performance. 1. Press the EFFECT button to enter the effect setting. 2. Rotate and press the Value knob, select the channel and effect you want to adjust. 3. Rotate and press the Value knob, adjust the parameters you want. 4. After setting, save the current parameters as your preset for the next use.
PAGE 12
System Setting Press the SYSTEM button to enter system settings, rotate, and press the Value knob to adjust the settings you want. Screen Brightness BT TF Card Quick Setup Reset Factory Reset （ All data will be deleted! Make sure to back up data before restoring factory reset. Info Firmware version Rotate and press the Value knob to adjust settings, such as: brightness, Bluetooth, MicroSD card, reset function and adjust the light color of the whole machine, etc.
PAGE 13
PC02 Specifiction Connections Input XLR x 4,balanced / TS x 4, unbalanced Line In Stereo, 1/8" TRS Line Out Stereo, 1/8" TRS Phones Stereo, 4 x 1/4" TRS Main Out Stereo，1/4" Balanced TRS PC/MAC/Android/iOS USB-C Game Console Optical Electrical Spec Gain Range 0-57dB Headphone Output Power 125mW @ 32Ω Frequency Response 20Hz~20kHz @ -3dB Input Impedance 600 ohm(XLR)/1M (TS) Dynamic Range 110±0.5dB S/N Ratio 109±0.
PAGE 14
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.