Test Report No.: GETEC-E3-05-016 FCC Part 15 Subpart C Certification APPENDIX I : USER’S MANUAL EUT Type : FM Transmitter (built-in 12” Motorized combo) FCC ID.
CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. GYG#FRPER#PRQLWRU 45%#TFT-LCD#PRWRUL]HG 08/&3 4 .
Installation of all TV monitors must be out of the driver’s field of sight. Be careful not to overload your cigarette lighter plug by adding more than one device at a time. Be careful not to drop or apply under pressure to the front panel of your video monitor. If the screen cracks due to misuse, your warranty will be void! Do not mount the product where it will obstruct the deployment of the airbag or in an area where it would affect the vehicular control.
Unit You can hear the sound of audio sound by using wireless infrared headphone. (Wireless IR headphone is optional accessory) Wireless Infrared Receiver. This allows transmitting of the remote control's IR signals for controlling all functions of your monitor. Remote Control Eye. -".
APC button DISPLAY button GOTO button Numberic button MENU button TITLE button PICTURE button FF/FR button Slow button Play/Pause button REW Search button MODE Button DVD Ą AV1 Ą AV2 (TV function added TVĄAV1ĄAV2ĄDVD) Battery Normal/DVD switch AUDIO button Volume control button (DVD) STOP button Control stick FWD search button Monitor display adjustment button Mute button A.
2. When mute is on, press the mute button again on the remote control, displayed "MUTE Off" on the monitor and play the audio sound. 1. Press the mute button on the remote control, displayed "MUTE" on the monitor and mute the audio sound. Mute the audio sound. Mute Function Remote Controller Control the Monitor Angle as your taste. Whenever press the Ā/Ă button, monitor angles will be changed 3 steps.
GAME AV Input (AV1) AV Input (AV2) 4. Play the external device. 3. Select the AV1 or AV2 mode by pressing the MODE button on the unit or on the remote control. 2. Turn the power on the unit and external devices AV Output CAMCORDER 1. Connect the external devices as shown below (efer Connection Diagram). AUX (AV1/AV2) Mode ö When power on or except DVD mode, sert the disc to turn the power on and play the disc automatically. 2.
The screen will be the standard 4:3 ratio. /03."- ö Each Mode will be displayed as below; 8*%& PICTURE CONTRAST 50 BRIGHT 40 COLOR 40 TINT 25 SCREEN NORMAL PICTURE CONTRAST 50 BRIGHT 40 COLOR 40 TINT 25 SCREEN WIDE The screen will be magnified to the ratio of 4:3 on the left and right sides. 3. Control the desired SCREEN mode by pressing the + / - button on the unit or control the stick left/right on the remote control. 2.
4. To turn off the SETUP menu, press the 3. Use the button to find desired items. 2. To bring up the SETUP menu , press the 1. Press the STOP button, if the disc plays. button again. button. When the button is pressed, the monitor screen shows the setup menu as shown below. Select a menu category to modify according to individual preference. You can easily modify setup information on the setup menu. When this symbol appears, it indicates that an invalid button has been pressed.
On Off On Off STR Stereo L-Mono R-Mono Mix-Mono Dual Mono (1 + 1) Setup Dual Mono Dynamic Dolby Digital Setup . . Set DRC Off STR Dolby Digital Setup . . Dual Mono Dynamic . . OFF 1/4 1/2 3/4 FULL Use this function to change the setting from the factory. - Preset Off position. Use this function to set the input audio signal to fit into the speaker. . . Dynamic Dual Mono Stereo L-Mono R-Mono Mix-Mono Dual Mono (1 + 1) Setup STR Dolby Digital Setup . .
High Medium Low High Medium Low Brightness Brightness ญญญญญญญญญญญญญญUUUUUUUUUUUUUUGW Contrast Low 00 00 None 00 00 1 T Video Quality Setup . . Sharpness Brightness Contrast Gamma Hue Saturation Luma Delay . . Contrast Contrast ญญญญญญญญญญญญญญญUUUUUUUUUUUUUUGW Control the contrast of picture conditions. After select menu, press the control and move left/right to control the picture conditions. Contrast Brightness Low 00 00 None 00 00 1 T Video Quality Setup . .
On Off . . Use the subtitle language menu to select the subtitle language that you prefer. If the disc you are playing has that language available. It will display subtitles . . Preference Page . . in that. English TV Type PAL 1) When disc is "STOP", press the SETUP button French PBC On Audio ENG Spanish on the remote control. (Remote control is DVD mode.) Chinese Subtitle Disc Menu ENG Japanese 2) Select Preference Page by moving left/right Korean Parental the control stick on the remote control.
Change Password On Change Password Setup Page . . Password Mode On Password . . OK Confirm PWD New Password Old Password 1) Select "Password Setup"sub item. 2) Enter your old password, and new password in 6 digits. (The default password code is 000000) 3) Re-enter new password for confirmation then press the 2. Password Change Password Mode On Off Password Setup Page . . Password Mode On Password . . 1. Password Mode ÿ Password Setup Page button. An invalid button press.
1 5JNF Stop OSD [AUDIO] An invalid button press. [AUDIO] / [MP3] The menu of a DVD disc varies. The content of the menu on the screen is dependent on the particular DVD. [DVD] MENU Use to set various functions according to your individual preference. SETUP After pressing STOP button, select the desired folder and set the condition by pressing ENTER button. [MP3] An invalid button press.
An invalid button press. [AUDIO] / [MP3] slow forward play : press slow button. slow rewind play : press slow button and forward button again. (not in work VCD) Used to play a disc in slow forward or slow reverse. This allows you to search forward three steps to reverse three steps to reverse three steps. [DVD] / [VCD] SLOW An invalid button press. [AUDIO] / [MP3] Used to display the title menu of the loaded DVD disc. (This function is disc-dependent.
An invalid button press. [MP3] Press this button to repeat the selected segment. The selected segment will be repeated automatically until canceled. [DVD] / [VCD] / [AUDIO] REPEAT A-B Used to move to the next track from the current track. [AUDIO] / [MP3] Used to move to the next chapter from the current chapter. [DVD] / [VCD] NEXT Used to move to the previous track.
Watch play time. Time Display Sets the repeat play. Repeat Chapter time. CH Time Total time. TT Time Watch the different view angle. "OHMF Select the desired subtitle. Subtitle Selects the desired audio output. Audio Move to the desired chapter. Chapter Move to the desired title. Title Title Chapter Audio Subtitle Menu Bitrate 31 llllll When Watching DVD available to control the Menu. GOTO An invalid button press.
UNIT 4$3&8 " SCREW 4$3&8 # 4. Tighten the unit with the supplied 8 screws(screw B). 3. Match the position of installation bracket and installation plate with 8 screws(screw A). 2. Connect the external devices RCA cable or AV ouptut. (refer the connection diagram)) INSTALLATION PLATE 1. Unpack the color box and check the contents.
఼࣭ ࠤࡦ ADD : Add the channels that not in the memorized channels. DEL : Delete the channels that in the memorized channels. 2. Select add or delete the channels by pressing the MENU (ADD/DEL) on the remote control. 1. Select the channels as you want by pressing the 0~9 buttons or Ā Ā/Ă button on the remote control. How To Select and Delete Channels by Manual Use to add or delete the channel as your taste.
FM T B FM T B FM T B FM TX AUDIO BASS TREBLE BALANCE LOUDNESS FM TX AUDIO BASS TREBLE BALANCE LOUDNESS FM TX AUDIO BASS TREBLE BALANCE LOUDNESS 89.0 +7 +7 0 ON 88.8 +7 +7 0 ON 88.8 +7 +7 0 ON ö When FM TX is not installed or not working, you can hear the sound through IR headphone. (IR headphone is optional items) 4. After setting the Radio frequency, control the radio volume. 3. Select the Radio frequency from 88.0Mhz~89.
Point the remote control to the remote sensor of the product. Use the remote control within 5m. Remove the obstacle. Replace with new batteries. Is the distance too far? Is there any obstacle in the middle? Is the battery exhausted? Cancel the parental function or change the parental level. Is the rating level correct? Is the remote control facing at the remote sensor? Clean the disc.