User's Manual
Wireless Motion Sensor and Driveway
Alarm for Home Security System
Thank you for purchasing our products.
Please read and keep this manual carefully.
Please feel free to contact us if you have any query.
Mail:support@xkdun.com
Product introductions
Overview
1.Base station
USB portHP out
2.Motion Sensor
Solar Panel
Sensor eye
Operating instructions
3.Arm/Disarm Mode
4.Adjust the volume level of the base station
5.HP out
6.Low battery prompt
7.Battery charging
8.Clear pairing lists from the base station
How to installation the motion sensor
C. Motion sensor mounting height
Note:
1. The recommended installation height is 5-7FT.
2. The installation angle should be adjusted
according to the height and distance of the object
to be measured and the detection environment.
Specification description
Power Supply
Charge Time
Battery Life
Motion Sensor
Detection Distance
Motion Sensor
Detection Angle
Wireless Distance
Mounting height
of Motion Sensor
Work Temperature
USB 5V or built in 18650 battery
with 1800mAh for the Base station
and Motion Sensor.
600mA
about 4 hours
Thebase station can work for about
one month.
The motion sensor can work for about
one year.
Note: The battery life ultimately
depends on the trigger frequency
of the motion sensor and base
station.
Low Sensitivity 18FT
Hight Sensitivity30FT
Note: Maybe affectedby the
environment temperature.
86°for the horizontal direction
1/2 mile
(In a clear or unobstructed space)
5-7FT
-4to 140
Charge Current
User’s Manual
Model:D01
Ɣ9OL
Press the Volume + button to increase the volume level of the
base station.
Ɣ9OL
Press the Volume - button to reduce the volume level of the
base station.
ƔMode
Press and hold the Mode button for 3s to enter the pairing mode
and short press to change the zone number.
ƔPower
Press and hold the power button for 3S to turn on the base
station.
Press and hold the power button for 3S to turn off.
ƔArmDisarm
Short press the Arm/Disarm button to switch between the arm
and disarm modes.
Arm: Sound alarm and LED indication alarm are carried out
simultaneously.
Disarm: only the LED indicator flashes.
VOL+
VOL-
MODE
POWER
Arm/Disarm
Hanging wallboard
Silicone cover
Power/Sensitivity Switch
Low=18FT
High=30FT
Charging port
1. Turn on/off the base station
The base station will power on automatically when USB is
plug in.
Press and hold the Power button for 3seconds to turn
on/off the base station.
2.Add(pair) anew sensor
If you want to add additional motion sensors that you need
to pair the motion sensors with the base station. Please
refer to the following steps.
a. First power on the base station and then press and hold
the Mode button for 3 seconds to enter the pairing mode
and the Zone A flashes quickly for 30 seconds and waiting
for pairing.Short press the power button to exit the pairing
mode.
b. Power on the motion sensor and wave your hand in the
front of the sensor eye to trigger the motion sensor that
you can see a red-light flashes once in the sensor eye.
c. The base station will produce a unique tone to indicate
that the pairing has been successful. The zone number will
be increased automatically, e.g. Zone A -> Zone B -> Zone
C -> Zone D.
d. You can also specify this zone number manually that
press and hold the Mode for 3S to enter the pairing mode
and then short press the Mode button to change the zone
number that your favorite, then wave your hand to trigger
the motion sensorto complete the pairing.
Note:
1. You need to pair the motion sensor with the base station
when you use it first time.
2. Each channel has independent music tips for easy
differentiation.
ƔThe home security alarm system includes a base station
and a motion sensorfor indoor and outdoor use.The motion
sensor has a waterproof grade of IP65.
ƔBuilt in lithium battery: The base station and motion
sensor has built-in the high-capacity battery will keep the
ultra-long standby time.
ƔSolar charging for Motion Sensor: The motion sensor can
be charged with solar panels that you never do not need to
take it down for charging after installation.
ƔSuitable for a variety of use scenarios±The motion sensor
is an important part of any family safety solution. The
waterproof motion sensors in the system use the
pyroelectric infrared technology to detect the heat source
of moving object, so that you can quickly receive the
motion alarms of people, cars and animals in your
driveways, front porches, gates, sheds, walkways and
even hunting. Great for homes, businessesand offices.
ƔEasy to Install expandable - This system is easy to
install that only need 2 screws to fix it and expandable that
can be set up within minutes. one receiver can expandable
with up to 16 sensors for full coverage of your property.
The sensors can be mounted to walls, fence posts, trees,
or any other surface, providing extra layers of security and
home safety.
Short press the Power button to change between the
Arm and Disarm mode when the base station is on.
Arm Mode: Sound and red led indication alarm at the
same time and the green led of power indicator is always
on to show the status.
Disarm Mode:There is only light indication and no
audible alarm when the motion sensor is triggered and
the green led of power indicator flashes to show the
disarm status.
Note: The base station is in arm mode by default and
the green led of power indicator is always on.
Press the Volume+/Volume- button to change the volume
level of the base station.
If you don't want to disturb others, you can use the
headphone output that will cut off the speaker out.
a.If the battery of the base station is low, the red power
indicator on the base station will flashes quickly.It with
voice prompt : “Base low battery, please charge ”.
Please charge the battery in time.
b.If the battery of the motion sensor is low, the zone
number indicator on the base station will flashes quickly.
It with voice prompt : “Zone A/B/C/D Low Battery ,please
charge ”.
Please charge the battery in time.
ƔBase station
Charging mode：the red power led is always on.
Full Charge ：the red power led will turn off and the
green led will keep on.
ƔMotion Sensor
Charging mode：the red indicator flashes
Full Charge：the red power led will turn off.
Press and hold the Mode button on the base station
and then plug in the USB power until the four zone
indicators turn off in sequence, the pairing listwill be
clear.If you want to continue to use it, you need to pair it
again.
a.Installation method
Fix the hanging wallboard of the motion sensor on the
wall/tree or the flat surface of other objects with the
screws in the accessories.
b.Installation environment confirmation
The motion sensor uses a Pyroelectric infrared sensor to
detect the infrared radiation temperature change of a
moving object. The infrared changes around the
installation environment have a great impact on it, so
there are the following requirements for the installation
environment:
1)The sensor detection range cannot have air cooler or
warm fan and other interference infrared changes, it is
best not to have trees.
2)Avoid direct infrared sensor eye of sunlight, car
headlights, incandescent lamps, etc..
3)Between the sensor and the detection object to avoid
glass and allylic and other substances difficult to pass
through the far infrared.
4)The sensor cannot be used to detect a heat source
that is not moving or moving at high speed.
5)Electromagnetic interference or obstacles will reduce
the wireless distance. Please avoid too many trees,
walls and other obstacles between the sensor and the
base station, and there must be no metal obstacles.
FCC Radiation Exposure Statement:
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment .
This transmitter must not be co‐located or operating in conjunction
with any other antenna or transmitter.