User Manual GPS PF08-5004HD/T
Thanks for using YF GPS PF08-5004HD/T! z YF reserves the rights of final interpretation of the manual. z The manual content is subject to change without notice. Please accept our apology for your inconvenience. z Please back up your data of the GPS navigator. YF assumes no responsibility for any loss caused by data loss. z The manual might contain a few mistakes though it has been checked. If any mistake is found, you are welcome to contact the YF customer service center.
Operation Instruction Read Me First z Please read the instructions in this manual and use only accessories of YF to avoid unpredicted damage. Failure to follow the instructions will invalidate warranty and might endanger personnel safety, for which YF assumes no responsibility. z Data of navigation electronic maps might be inconsistent with actual traffic signals due to transportation development. Please follow traffic regulations and signs and drive according to road situation.
Contents Welcome ---------------------------------------------------------------------------------------------------------------------------- 1 Chapter I Beginning Use -------------------------------------------------------------------------------------------------------- 2 1.1 Appearance -------------------------------------------------------------------------------------------------------------- 2 1.
Welcome Welcome Thanks for using GPS PF08-5004HD/T. It is featured with navigation function, audio & video play, photo browsing and e-book functions.
Chapter I Beginning Use This chapter introduces the appearance, components and basic operations of GPS PF08-5004HD/T. 1.1 Appearance The product picture below is subject to the material object. SN Component Explanation 1 Power key Powering on/ off and sleep 2 Indicator light Indicating the operating state of external power supply 3 Earphone jack Connected with the stereophone, 3.
1.2 Power Supply & Charging Charge the GPS navigator fully with the charger before first use. 1.2.1 Power Supply The GPS PF08-5004HD/T can be powered by the built-in battery or external power supply. When the GPS navigator is unconnected to the charger, it is powered by the Li-polymer battery. The battery capacity icon in the system main interface shows current residual battery capacity. When the GPS navigator is connected to the charger, it is powered by external power and the battery is charged.
[Note] To avoid damage due to current surge, plug in the car charger after the automobile is started. 1.3 Basic Use 1.3.1 Power on/off & Sleep 1.3.1.1 Power on Press the power key of the GPS navigator and let go after at least two seconds to power it on. [Note] Great humidity fluctuation may lead to short circuit of the GPS navigator. Power on the navigator after it has accommodated to new environment. 1.3.1.2.
[Note] Restarting the system by pressing the reset key will result in loss of unsaved data. Please backup your data regularly. 1.3.3 Fix the GPS Navigator with Mounting Kit The mounting kit is composed of a back splint and a bracket. To use the GPS navigator in an automobile, fix it on the dashboard under the front windshield. [Note] Do not place the GPS navigator in positions obstructing the driver’s vision.
Note: you can tap on the screen and drag upwards to display the rest function icons The main functions are listed as below.
7
Chapter II GPS Various navigation applications can be installed in the GPS navigator, such as CARELAND and RITU intelligent navigation systems, which position the navigator via the satellite receiver and display it on the map. Set a destination, and the system will automatically work out the best path to help the user reach the destination safely and quickly. 2.1 Map Due to transportation development, inconformity between products and real traffic information will occur a period after product release.
Chapter III Music Player This section introduces the usage of the music player. 3.1 Features The music player supports WMA9 and WAV files and selection of play sequence. Copy audio files into the folder in your memory card before using the player. 3.2 Interface and Operation Tap the Music icon in the system main interface to enter the Music Play interface as shown below. Icon Name Explanation Close Close the music player. Minimize Minimize the music player and return to the system main interface.
Progress Drag it leftward or rightward to play from a previous or future moment. Music list Enter it to select music to play. Equalizer Enter the equalizer. 3.3 Select and Play Music Tap Icon in the interface Music Play to enter the Music list shown as below. Name Explanation Close Close the Music List interface Scroll bar Drag it upward/ downward to view all music. Add one Add a piece of music on the left list to the play list on the right.
Double tap the lyrics area to view the lyrics in full screen as shown below. Under full screen mode, double tap the screen to return to normal-sized interface. 3.5 Set the Equalizer Tap Tick in in the Music Play interface to enter the Equalizer Setting interface as shown below: on the upper left of the above interface, and then tap to select a music type or “User” from the drop-down menu.
Chapter Ⅳ Video Player This section introduces the usage of the video player. 4.1 Features The video player supports WMV, ASF and AVI files, full-screen play, progress selection and file selection. Copy video files to a folder in your memory card before using the player. 4.2 Interface and Operation Tap the Video icon in the system main interface to enter the Video Play interface shown as below. Icon Name Explanation Close Close the video player.
Volume Drag it leftward to turn down or rightward to turn up the volume. Time Display the play time and the music duration. 4.3 Select and Play Video Tap Icon in the Video Play interface to enter the video folder shown as below. Name Explanation Close Close the video folder. Scroll bar Drag the sliding block upward/ downward to view all the files inside the folder.
Chapter Ⅴ Photo Browser This section introduces the usage of the photo browser. 5.1 Features The photo browser supports JPG,GIF,BMP and PNG files, photo rotation, zoom in/ out and auto play. Copy photos to a folder in your memory card before using the browser. 5.2 Interface and Operation Tap the Photo icon in the system main interface to enter the Photo Browser interface shown as below. Icon Name Explanation Previous View the preview photo in the folder. Next View the next photo in the folder.
Close Close the browser and return to the system main interface. In the above interface, double tap on the screen to display photos in full screen: Tap to enter auto play interface as shown below. Drag the slider at the bottom of the screen to regulate play speed (1-10 seconds), and then tap on the screen to hide the slide (or the slide will be hidden automatically); tap on the screen to show the slide. Double tap on the screen to stop playing and return to the browsing interface.
Chapter Ⅵ E-book Reader This section introduces the usage of the E-book reader. 6.1 Features The reader supports text files in .txt format, page turn and folder selection. Copy text files in .txt format to a folder in your memory card before using the browser. 6.2 Interface and Operation Tap the e-book icon in the system main interface to enter the E-book Reader interface shown as below. Tap in the e-book reader interface to enter the e-book folder shown as below: Close Close current folder.
Scroll bar File Drag the sliding block upward/ downward to view all TXT files. name& The file name and format. format Select a text file and tap it to enter the Reading interface as follows: Icon Name Explanation Close File Close the reader. name& Current file name and its format format Scroll bar Drag the sliding block upward/ downward to view all content of the e-book. Folder Enter the e-book folder to select an e-book to read. Previous Read the previous page. Next Read the next page.
Page/ total Current page/ total pages pages Tap Icon in the e-book reader interface to enter the Setting interface shown as below. Name Explanation Close Exit the setting interface. Save Save the setting. Theme Tap to select a theme for the e-book. Font Tap to select a font for the e-book. Bold Tap to enable bold type. Tap it again to cancel. 6.
6.4 Create and View Bookmark To create a bookmark, locate a page by taping or reader interface and drag to select text content. Tap or dragging the scroll bar in the when it is on and a dialog will popup as follows: Tap OK to finish creating a bookmark. Repeat this operation to create more wanted bookmarks. Tap to view created bookmarks in the interface of Bookmark List shown as below. Drag the scroll bar and select a bookmark on the left list. Tap bookmark or tap to delete unwanted bookmarks.
Chapter Ⅶ Games This chapter introduces the entertainment function - Games. in the system main interface to enter the games interface as shown as Tap the Games icon below. Tap to exit. 7.1 Othello Tap the icon in the Games interface to enter the interface as shown below. 7.
7.
Chapter Ⅷ Tools The tools include Calculator and Unit conversion. Tap the Tools icon in the system main interface to enter the tools interface as shown below. Tap to exit. 8.1 Calculator Tap the icon in the Tools interface to enter the calculator interface as shown below. 8.2 Unit Tap the icon in the Tools interface to enter the unit converter interface as shown below.
23
Chapter Ⅸ Setting 9.1 Summary This chapter introduces the setting of the GPS navigator. Tap the Settings icon in the system main interface to enter the Settings interface to set volume, backlight, language, date & time, calibration, factory settings, system info, USB and navigation path. In the above interface, tap the icon to view the rest function menus. The main functions are listed as follows: Function Volume Explanation Adjust the speaker volume; enable/ disable sounds for tap; Set startup music.
Factory Reset Reset the factory default settings. 9.2 Volume Tap in the setting interface to enter the volume setting interface as shown below. Close Exit the volume setting. Volume Ten volume grades (from mute to maximum) available. Tap to decrease the volume by grade. Sounds for taps Tap it to enable the function. Tap it again to disable the function. Power-on music Tap or to select power-on music or disable it. 9.
Backlight Drag leftward to turn down or rightward to turn up the backlight. Auto backlight When this column is ticked, the backlight will be automatically adjusted according to the environment brightness. 9.4 Language Tap the icon Tap or in the setting interface to enter the language setting interface as shown below. to select a system language and then tap the icon to save the selection. 9.5 Date& Time Tap in the setting interface to enter the date and time setting interface as shown below.
9.5.2 Setting the system time zone In the above interface, tap or to select a time zone. 9.6 Calibration Tap the icon in the setting interface to prompt the calibration dialog shown as below. Tap OK to execute calibration or Cancel to cancel calibration and go back to the setting interface. If tapping OK, the following calibration interface will popup.
Tap OK to restore the default setting or Cancel to quit and return to the setting interface. 9.8 System Info Tap the icon in the setting interface to view the system information as shown below. 9.9 USB Connect the GPS navigator to PC via the MINI USB port to transmit data, or back up data from the navigator data to PC. The GPS navigator provides MASS STORAGE and MS STORAGE modes. Select one in the USB setting. 9.9.1 MASS STORAGE 1.
Select MASS STORAGE and tap to save it. 3. Connect the MINI USB terminal of the USB cord to the MINI USB port of the GPS navigator and the standard USB terminal to the USB Host port of PC. Then, the computer will recognize the navigator and prompt the following interface. To disconnect the navigator from PC and enter charging mode, you may tap 5. After communication, unplug the MINI USB cable. 9.9.2 MS ACTIVESYNC 1. Tap in the setting interface to enter USB Option as shown below. 29 .
Select MASS ACTIVESYNC and tap to save the setting. 2. Install the application Mobile Device in a drive of PC. Then the following icon will appear in the drive selection. 3. Connect the MINI USB terminal of the USB cable to the MINI USB port of the GPS navigator and the standard USB terminal to the USB Host port of PC. 4. After the PC finds new hardware, double click the Mobile Device drive in the selection area to enter the memory of GPS navigator for data transmission. 5.
Chapter Ⅹ GPS Info Tap on the system main interface to view the GPS information as shown below. To reset the GPS satellite receiver, tap to prompt a dialog as below. Tap OK to reset the GPS satellite or tap Cancel to exit.
Appendix Troubleshooting Please carry out the following operations in case of abnormal operation of the GPS navigator. For further problems, please contact our customer service center. Fault Reason Solution Low battery Supply external power and charge the Startup failure battery. System down Reset the GPS navigator. Supply external power and charge the Sudden power cut Low battery battery. Low backlight Turn up the backlight. Backlight off Tap the screen with the touch pen.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes and modifications to this equipment. Such changes and modifications could void the user’s authority to operate the equipment.