Specifications

RGB Controller Instructions

Specifications:

Voltage: 12V DC;

Current: 0.02A

Control mode: APP control mode and RF Remote control mode

I, APP Control Mode: --- APP Operation For RGB Light

1.Download the “Happy Lighting” App on a smart device by scanning The QR code on the

controller or searching for it in the App Store.

NOTE: Android users may have “Enable Unknown Sources” unde App Settings/Security

to see “Happy Lighting” in the App Store.

2.Go to the device’s Bluetooth settings and pair the device with the wireless Controller.

NOTE: if the RGB Daytime Running Light is not powered by the Indicator, the Running

light can be turned ON/OFF through the Happy Lighting App

3. Once synced, the Happy Lighting App will control the Light functions.Explore the

various colors and functions using the App.

PAGE 1
RGB Controller Instructions Specifications: Voltage: 12V DC; Current: 0.02A Control mode: APP control mode and RF Remote control mode I, APP Control Mode: --- APP Operation For RGB Light 1.Download the “Happy Lighting” App on a smart device by scanning The QR code on the controller or searching for it in the App Store. NOTE: Android users may have “Enable Unknown Sources” unde App Settings/Security to see “Happy Lighting” in the App Store. 2.
PAGE 2
II, RF Remote control mode: --- Remote control function For RGB Light 4 Button Wireless Remote A: Short Press 1-14 Times: 1) Colorful fading 2) Colorful flash 3) Colorful jumping 4) Red / green fading 5) Red / blue fading 6) Green / blue fading 7) Purple / yellow fading 8) Red fading 9) Green fading 10) Blue fading 11) Yellow fading 12) Cyan fading 13) Purple fading 14) White fading B: Short press to select music mode. C: Button to change the Speed.
PAGE 3
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.