Instructions

FCCID：2ALCFXY-OT038
1 x Wireless Charging Stand
1 x integrated Type-C charging cable
1 x Instruction Manual
1.
2.
3.
4.
5.
•
•
Mobile Phone Stand Board
LED Indicator
Integrated Cable with Type C tip
Wireless Charging Surface
Magnetic Surface (remove the film before use)
What’s included:
Features:
2
Type-C Input: DC 5V/2A; 9V/1.5A
Wireless Output: 5W/7.5W/10W
1
5
4
3
Wireless Charging Mobile phones and
other electronic devices:
Connect the Type-C tip(3) of the
charging pad to a power source.
indicator will glow BLUE&RED for 4
seconds then turn RED to indicate the
wireless charger is in standby mode
and ready to begin charging.
LED
Place the wireless charging supported
mobile device on the wireless charging
surface(4), LED will glow BLUE when device
is charging.
Phone will begin to charge automatically.
Once fully charged remove the device.
Note: When wireless charging, if the Led
indicator flash BLUE the device is either
NOT a wireless charging device or there
is an object between the the device and
charging surface interfering with the charging
process.
1.
•
•
•
•
**
Wireless Charging with Magnetic Surface:
If your wireless charging compatible device
contains magnets, it will attach to the
magnetic surface(5) of the stand for better
alignment to secure wireless charging.
This item is also compatible with other items,
the magnetic function just won’t work.
2.
•
•
Instructions:
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
•
1.
2.
SAFETY PRECAUTIONS:
Do not overcharge your phone.
The
unit may become hot under excessive
use. Remove your phone once it is fully
3.
3.
Phone Holder Function:
•
If your device contains magnets, it will attach
to the surface to hold your device vertically
or horizontally.
•
If your device does not contain magnets,
you will need to pull out the stand board(1)
to hold it.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above the
Do not use the device if damaged or
Do not disassemble the device. For
professional. incorrect reassembly may
or temperatures above 104°F may cause
explosion.
use only identical replacement parts to
ensure product safety.
Attachments on the back of your phone
can impede the effectiveness of the
wireless charger, and lead to overheating.
Please remove any attachments from the
phone before charging on this device,
attachments can interfer with wireless
charging and lead to over heating.
The strong magnetic fields of neodymium
magnets can damage items such as
television, computer monitors, credit cards,
bank cards, computers, diskettes and other
data carriers, video tapes, mechanical
watches,
hearing aids, loud speakers and
5.
6.
7.
8.
9.
10.
11.
charged. Never charge your phone for
more than 7 hours at a time.
4.
To reduce the risk of injury, close
supervision is required when the product is
used near children.
12.
VCRs.
Pace-makers may be damaged or
switch to
"Test Mode" in the presence of a
strongmagnetic force, if a pace-maker or
other
electrical body implant is in use, keep
a minimum of 3 feet distance.
FCC Warning
This device complies with part 15 of the FCC rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any inte rference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interferenceto radio or television reception,
which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. During the
operation of device a distance of 15 cm surrounding the
device and 20 cm above the top surface of the device must
be respected.