How-To Guide

Sterilization box with UV light sanitizer
There is no lithium battery inside this product. It is powered by the Type-C cable
connecting to the power source.
UVC wavelength: 270nm-280nm
UVC light power: 0.3Wx 2pcs
**How to Use
1 Plug in the TYPE-C cable.
2 Open the Case and place your device inside of the case.
3 Make sure the case is closed.
4 There are two sanitizing modes - fast mode and deep mode. Fast mode will take
90s and deep mode will take 5mins (300s).
*Fast sanitizing mode: Press the power button one time , the blue light on top
cover will light up, the UVC LED inside the box will light up for 90 seconds. The blue
light will flash 3times when sanitizing finished and light will turn off.
*Deep sanitizing mode: Press the power button two times , the green light on top
cover will light up, the UVC LED inside the box will light up for 5minutes. The green
light will flash 3times when sanitizing finished and light will turn off.
5 Flip and repeat to sanitize both size.
6 repeat the step while need more deeply clean.
Power Button
Type-C Input
Indicator Light

Summary of content (3 pages)