Instruction Instruction

Product Spec
Input : 9V-1.57A-2.2A / 5V-2A-3A
Output 1: 5V/1A, 9V/1.1A (MAX 10W)
Output 2: 5V/1A, 9V/1.1A (MAX 10W)
Popular Compatible Models
Quick Charge Modes - 9W*2
iPhone 11, 11 Pro, 11 Pro Max, XS, XS Max, XR, iPhone X
Galaxy Note 20, Note 20 Plus, S20, S20 Ultra, Note 10, Note 10 Plus, S10, S10
Plus, S10E, Note 9 S9 S9 Plus
High-speed wireless Charging MODES: charges Samsung phones at
10W and iPhones at 7. 5W; The fastest possible wireless input that
each can accept.
B
Charge 2 devices at once with dual pad's Twin charging surfaces.
Case friendly: Don't fumble with your phone case. Powerwave
charges directly through protective cases. Rubber/plastic/TPU
cases less than 5 mm thick only. Magnetic and metal attachments
or cards will prevent charging.
Feature
Usage
If the LED light flashes while charging, please check to ensure that
your phone case is less than 5 mm thick and has no metal
attachments, expandable grips, or credit cards. Cases which
contain metal, such as Pitaka, Evutec, and Spigen QNMP, will
trigger foreign object detection and interrupt charging.
Connect USB to C cable to charging port with USB charger.
APRIL X STONE ENTERMAX
EnterMax 20W Dual Fast Wireless Charging Pad
Charging Pad
USB to C cable
Instruction
Instruction
Component
APRIL X STONE ENTERMAX
Function & Part Name
Wireless Charging point 1
Wireless Charging point 2
Display the charging state led
USB-C type charging port
2
1
3
4
APRIL X STONE ENTERMAX
3
FCC Statement
This device complies with part 15 and part 18 of the FCC Rules.
Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not
explicitly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
Note: this equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 and part 18 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and candidate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. During the operation of device a
distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
This device complies with Part 18 of the FCC Rules. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. If this equipment does
cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
● Increase the separation between the equipment and any other radio
device.
● Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.