User's Manual

Keyboard Product Specifications:
1. Key Type: Crater keys
2. Battery Type: 1 AA battery
3. USB 2.0 interface, pulg&play, no driver required
4. Compatible with Win XP, Win Vista, Win7, Win8, Win8.1, Win 10, Mac
5. Operating Voltage: 1.5V
6. Operating Current: 20mA
7. Sleeping Current: 100uA
8. Sleeping Time: 5 minutes
9. Keystroke: 50±5gf
10. Key life: 10 million key strokes
11. Dimension: 445*186.8*20mm
12. Weight: 550g
Package Contents:
1 x Wireless Keyboard C203
1 x Wireless Mouse TM176G
1 x User Manual
LED Indicator:
Num Indicator: It will show Blue color when the numeric zone is on and the functional
zone is off.
Low Power Indicator: The three LED will flash together for 8 seconds when the voltage
is lower than 2.2V. This will happen when you wake up the keyboard after sleeping or
when you turn it on again until you change the battery.
Wireless Mouse:
Product Specifications:
1. Working Frequency: 2.4GHz
2. Operation Voltage: 1.5V
3. Battery Type: 1 AA battery
4. Current Dissipation: 1.5V-10mA
5. Standby Current: 0.5-2.0mA
6. Sleeping Current: <0.1mA
7. Sleeping Time: 25 seconds
8. DPI Resolution: 800/1200/1600
9. Working Distance: ≤10M
10. Key Life: 3 million
11. Dimension: 38.29*107.5*59.5mm
12. Weight: 90g
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
90mm
封面
Issue? Let us help you right away!
Our goal is your complete satisfaction. That’s why we offer you a satisfaction guarantee.
If you have any issues at all, please reach out to us right away
Sales@sz-deying.com
Keyboard Instructions:
The wireless keyboard use one AA battery (not include). Open the battery
compartment cover. Install the battery in to the compartment, and make sure the
polarity of the battery is correct. the positive (+) and negative (-) ends of battery must
match the positive (+) and negative (-) markings in the battery housing .
Keyboard Re-pairing Method:
1. Unplug the USB receiver
2. Plug the USB receiver to the USB port, keep the keyboard and USB receiver
distance within 20cm, Press "Esc + K" keep 5S right away, then the keyboard light
will flash, it is successfully re-paired.
IMPORTANT NOTEYou must complete all operations in step 2 within 10
seconds after you Plug the USB receiver to the USB port.
Mouse Re-pairing Method:
Press and holding "right key+center key" to re-connect.
Functional Zone:
Press "Num Lock" button, the LED of "1" will turn off and the numeric zone will change
to functional zone.
Number "2", "4", "6", "8" are for down, left, right, up direction.
Number "1", "3", "7", "9" are for "End", "Page Down", "Home", "Page Up".
Number "0" is for "Insert".
Decimal point is for "Delete".
Welcome:
Thank you for choosing this wireless product. To ensure optimum performance and
safety, please read these instructions carefully before operating this product. It is
strongly recommended you keep this manual for future reference.
尺寸:90*90mm
材质:105G书写纸,单黑双面印刷,折叠
材质厚度:T=0.1±0.02mm

Summary of content (1 pages)