User's Manual

HOMEDEPOT.COM
Please contact 1-855-556-1852 for further assistance.
Use and Care
Guide
Wir
eless Push Buttons
ITEM #206 049 303,#1001 406 887,
MODEL #216592,
#216593,
#216594, & #216595
Installation
1
ACTIVATING THE PUSH BUTTON BATTERY
Remo
ve the front cover of the push button by inserting a flat
head screwdriver in the slot on the bottom of the button and
pulling up slightly.
Remo
ve the plastic tab from the battery compartment to
allow connection to the terminal.
Snap the front co
ver onto the base by first hooking the tops
together, then snapping the base on.
Repeat for second button if applicable
.
2
POWERING THE CHIME
Install the c
hime batteries or plug in the chime, following the
instructions included in the chime.
3
SYNCING THE CHIME AND PUSH BUTTON
Follo
w the instructions included in the chime.
4
MOUNTING THE PUSH BUTTON
Remo
ve the front cover from the base by following step 1.
Mount the push button base to a clean w
all or door jamb
with included screws or mounting tape. If mounting with
screws, predrill a pilot hole through the push button base in
the desired location using a 5/64 in. drill bit.
Snap the push button co
ver onto the base by first hooking
the tops together, then snapping the base on.
216595Inst.ai
TOOLS REQUIRED
Phillips scr
ewdriver Flat Head Screwdriver Drill
HARDWARE INCLUDED
#4x3/4
#6x3/4
#4x1 White Zinc
#6x1 Self T
apping
ScrewHardware.ai
(2) #4 x 3/4 in. Scr
ews (1) Adhesive Sticker
216595Inst.ai
5/64 in. Drill Bit
216595Inst.ai
#4x3/4
#6x3/4
#4x1 White Zinc
#6x1 Self T
apping
ScrewHardware.ai
#1001 406 886,#1001 406 884

Summary of content (6 pages)