User's Manual

ManualsBrandsDONGGUAN SMART HERO ELECTRONIC PRODUCTS ManualsElectronicsSMARTCHIME DOOR CHIME RECEIVER

 1/4



Usermanual



WIFIintelligentdoorbellsettingstep:



1useadedicatedpoweradaptertoprovideintelligentdoorbell(5V500mA.),whenthesmartdoorbelllightsto

thebluestateofthesmartdoorbellflashing.Afterafewseconds,theblueindicatoroftenlights.Atthistimethe

smartdoorbellintothemobilephoneapplicationplatformpairingstate.

2 use

the mobile phone to download the web site as provided by the manual, and install it (Android, Apple

System)..

3openthephonetoopenWIFI,selectthesmartdoorbellWIFIaccount(Smartchime_SET)intotheconnection.

4 after the success of the phone connection, we download the smart doorbell application platform

 as shown

below:



5 click the platform application icon to add the right corner of the device, this time there will be intelligent

doorbelldeviceparametersinformation.ThenclickConfigurenetworkconfiguration.





Summary of content (4 pages)

PAGE 1
User manual WIFI intelligent doorbell setting step: 1 use a dedicated power adapter to provide intelligent doorbell (5V500mA.), when the smart doorbell lights to the blue state of the smart doorbell flashing. After a few seconds, the blue indicator often lights. At this time the smart doorbell into the mobile phone application platform pairing state. 2 use the mobile phone to download the web site as provided by the manual, and install it (Android, Apple System)..
PAGE 2
6 click Configure the network to enter the WIFI settings screen (pictured) 7 click the select button in the above screen to configure the WIFI name to enter the password. (as shown in Figure) 8 Click to confirm access to the network configuration of the device, the smart doorbell indicator lights from blue to green and shiny, about seconds after the lights often bright green said configured successfully.
PAGE 3
10 click the search to add a smart doorbell device to confirm. (as shown in Figure) 11 intelligent doorbell configuration after the completion of. Press the learning button of the smart doorbell, the indicator light turns red, triggers the launch into the paired learning. After learning the success of the lights becomes green. 12 after the completion of configuration learning, triggering launch, the smart doorbell will ring tones, mobile phone platform will receive the appropriate information.
PAGE 4
“This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.