User's Manual
User’s Guide 2603695
2 3 4 5 6 7 8
Pair the Keyboard to your Tablet
1. Slide the OFF/ON switch to ON. The Bluetooth
indicator ( ) lights for 2 seconds, then turns off.
2. Activate your tablet's Bluetooth function (refer to the
user’s guide).
3. Press the keyboard's Connect button, the Bluetooth
indicator ashes on, indicating the keyboard is
searching for Bluetooth devices.
4. When Bluetooth 3.0 Keyboard appears in the
Bluetooth devices list, tap it.
5. You are prompted to enter a pairing code. Enter the
code and press Enter/Return on the keyboard to
complete the pairing.
n
Note:
•If no button or key is pressed for 10 minutes, the keyboard
enters standby mode (shown as Disconnected in the Bluetooth
devices list) to save power. Tap any key to use the keyboard.
•If a key is pressed and held for up to 10 minutes, the
keyboard enters standby mode. Release the pressed key and
then press any other key to waken the keyboard.
Change Bluetooth Devices
Your Bluetooth keyboard will automatically remember
the most recently paired device. To use a new device, you
must rst disconnect the recently paired device.
To disconnect the paired device, press the keyboard's
Connect button. The keyboard starts searching for another
Bluetooth device.
Features
•Detachable Bluetooth keyboard is compatible with
most iOS tablets (iPad
®
) and Android™ tablets
•Durable case ts most 9-10.1" tablets
•Hotkeys for quick access to multimedia and other
applications
•Charge with a micro USB cable
•Palm rest helps improve comfort and posture
Set Up the Tablet Case
The keyboard is held in by magnets and can be removed
out of the case.
Use the strap as a stand to prop up the case. To adjust the
stand angle, use the two button fasteners on the strap.
Slide the OFF/ON switch to OFF after use.
w
Caution:
•Keep your tablet case with keyboard away from humidity, and
extreme temperatures.
•Avoid contact with corrosive materials, such as perfume,
alcohol, or cleaning agents.
Package contents
•Universal Tablet Case with Keyboard
•Micro USB Cable
•User’s Guide
Charge the Keyboard
When the battery power is low, the charging indicator
blinks.
1. Use the micro
USB cable to
connect the
keyboard to
a USB power
adapter. The
USB power
adapter should
supply DC 5V, 500mA.
2 Plug the power adapter to a wall outlet. The charging
indicator lights red during charging, and turns green
when charging is complete.
3. Unplug the charging cable after charging.
Lithium Battery Safety Instructions
•Do not burn or bury batteries. Do not puncture or
crush. Do not disassemble.
•Do not dispose of lithium batteries in the trash. Recycle
at your local retail store.
•Use only chargers rated for lithium cells. Be sure the
charger’s voltage and current settings are correct for
the battery pack being charged.
•If the electrolyte in the cells gets on your skin,
thoroughly wash with soap and water. If in the eyes,
rinse thoroughly with cool water. Immediately seek
medical attention.
•Follow the manufacturer’s instructions for charging the
product and do not charge longer than recommended.
Unplug the charger when the battery is charged.
Universal Tablet Case
With Keyboard
Button Fastener
Strap
Use the Keyboard
•Set to iOS for iOS tablets. Hotkeys are active (the
entire top row).
•Set to Android for Android tablets. Only green hotkeys
are active.
•Fn key activates the number pad functions for the keys
with blue characters.
Specications
Power Input .................................................................................. 5V, 500mA
Bluetooth Pairing Range ........................................................... 6.5 ft. (2m)
Bluetooth Connection Range .................................................. 32 ft. (10m)
Bluetooth Protocol .................................................................................V3.0
Built-in Li-Po Battery Capacity ......................................................300mAh
Charging Time ......................................................................3 hours (Max.)
Continuous Working Time .................................................90 hours (Min.)
Operating Temperature ............................................... 0~40˚C (0~104˚F)
Storage Temperature ............................................. –20~60˚C (–4~140˚F)
Storage Humidity ............................................ 30-95% (relative humidity)
Keyboard Dimensions (HWD) .....10.6 × 5.1 × 0.3 in (270 × 130 × 7mm)
Tablet Case Dimensions (HWD) ...10.8 × 8.7 × 1.1 in (275 × 220 × 27mm)
Case with Keyboard Weight ................................................ 21.4 oz (605g)
Specifications are subject to change and improvement without notice.
Actual product may vary from the images found in this document.
FCC Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you
stop using your product. Changes or modications not expressly by
the party responsible for compliance could void the user’s authority
to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Limited Warranty
Ignition L.P. warrants this product against defects in materials and
workmanship under normal use by the original purchaser for ninety
(90) days after the date of purchase. IGNITION L.P. MAKES NO
OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by
or attributable to abuse, misuse, failure to follow instructions,
improper installation or maintenance, alteration, accident, Acts of
God (such as oods or lightning), or excess voltage or current; (b)
improper or incorrectly performed repairs by persons who are not
a Ignition L.P. Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) ordinary wear and tear or cosmetic damage;
(e) transportation, shipping or insurance costs; (f) costs of product
removal, installation, set-up service, adjustment or reinstallation; and
(g) claims by persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take the
product and the sales receipt as proof of purchase date to the place
of purchase. Ignition L.P. will, at its option, unless otherwise provided
by law: (a) repair the product without charge for parts and labor;
(b) replace the product with the same or a comparable product; or
(c) refund the purchase price. All replaced parts and products, and
products on which a refund is made, become the property of Ignition
L.P. New or reconditioned parts and products may be used in the
performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty
period. You will be charged for repair or replacement of the product
made after the expiration of the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND
CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY
IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUD-
ING THE IMPLIED WARRANTY OF MERCHANTABILITY AND,
Printed
in China
08A13
2603695
© 2013. Ignition L.P. All rights reserved.
PointMobl is a registered trademark used
by Ignition L.P.
The Bluetooth
®
word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Ignition L.P. is under license. Other trademarks and trade names
are those of their respective owners.
Android is a trademark of Google Inc.
iOS is a trademark or registered trademark of Cisco in the U.S.
and other countries and is used under license.
Complies with the European Union’s “Restriction of
Hazardous Substances Directive,” which protects the
environment by restricting specic hazardous materials and products.
IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF
THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE
PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT
TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR
INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUD-
ING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM
INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY,
REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to
you. This warranty gives you specic legal rights, and you may also
have other rights which vary from state to state. You may contact
Ignition L.P. at:
Ignition L.P., 3102 Maple Ave., Suite 450, Dallas, TX 75201 02/09
For product support, call
1-866-315-0426
OFF/ON Switch
Power/Charging Indicator
Bluetooth Indicator Connect
iOS/Android Switch
2603695_UG_EN_080913.indd 1-8 8/9/2013 12:05:43 PM