User's Manual

ManualsBrandsDongguan Siliten Electronics ManualsElectronicsBluetooth Music Receiver

T H E P E R F O R M A N C E Y O U N E E D

Bluetooth

Music Receiver

User’s Guide 1500476

Please read this user’s guide before using

your new receiver.

Package Contents

 Bluetooth Music Receiver

 AC Adapter

 1/8” (3.5mm) Audio Cable

 1/8” (3.5mm) to RCA Cable

 User’s Guide

Use Your Receiver

1. Plug the supplied audio cable or the

RCA cable into the AUX jack, OR plug

an optical cable (not included) into the

OPTICAL jack, then connect to your

speaker or ampliﬁer.

2. Connect the supplied power adapter

to the DC IN jack, then plug into a

standard AC outlet.

3. Press and hold CONNECT until the

LED indicator lights red to turn on the

receiver.

 If the AUX and OPTICAL jacks are both

connected, sound output will only be

available from the AUX connection.

 If the connected device moves too far

away from the receiver, the receiver

disconnects from the device but

resumes connection once the device is

close.

 Using an adapter that does not meet the

receiver’s speciﬁcations could damage

the receiver.

NFC (Near Field Communication)

You can touch the receiver with a NFC-

enabled device to connect or disconnect

the Bluetooth communication. You may

need to try different places on your

phone as the NFC might be placed on

either the back, top or bottom of the

phone cabinet.

If you have two or more NFC devices,

when you touch the second device

to the receiver, it will automatically

connect to the receiver, and the ﬁrst

device will automatically disconnect

from the receiver.

4. If the receiver has not been previously

paired with a device, the LED

indicator will light red. Press and hold

CONNECT until the LED indicator

ﬂashes red and blue to enter pairing

mode.

5. See instructions of your Bluetooth-

enabled device to pair with the

receiver. After successful pairing,

the indicator lights blue. If you are

prompted for a PIN, enter 0000.

6. Use the playback controls on your

audio device.

7. Disconnect the Bluetooth connection

after using; the indicator ﬂashes red.

8. Press and hold CONNECT for 3

seconds to turn off the receiver.

n Note:

 To avoid noise interference, always

power off your ampliﬁer or speaker

before plugging or unplugging your

cables.

UPDOWN

MULTI JOG

MASTER

VOLUME

ENTER

AUDIO MULTI-CHANNEL RECEIVER

SX-218

FRONT

AUDIO INPUT

DVD/LD

TV/SAT

DVR

R/TAPE/ MD FRONT AUDIO

QUICK

SETUP

RETURN

MUTE TONE

SLEEP

TUNER

EDIT

MULTI JOG

TUNING

STATION

MPX

VSB

MODE

DIALOGUE

ENHANCEMENT

-OR-

1500476_UG_EN_052813.indd 1-6 6/13/2013 11:26:39 AM

Summary of content (2 pages)

PAGE 1
® Package Contents T H E PE RF O RMANCE YOU NE ED ® Bluetooth® Music Receiver Please read this user’s guide before using your new receiver. User’s Guide 1500476 4. If the receiver has not been previously paired with a device, the LED indicator will light red. Press and hold CONNECT until the LED indicator flashes red and blue to enter pairing mode. Bluetooth Music Receiver AC Adapter 1/8” (3.5mm) Audio Cable 1/8” (3.
PAGE 2
Specifications Bluetooth Connection Range .......30ft. (9.14m) Main Unit................ABS, with silicone foot pad Frequency................... Band 2.402 – 2.483 GHz . ......................................... unlicensed ISM band Sensitivity.............................................. - 84dBm Bluetooth Protocol...............V3.0+EDR, Class 2 Power Input.................................100 – 240 VAC . .............................................. 50/60 Hz, 300 mA Power Output..........................