One Robstep for Every Family Manual ◆ Thank you for choosing and buying Robstep M2 ◆ This manual is designed to help you assemble, use and maintain Robstep M2 quickly
Contents 1.Overview 1 1.1 General 1.2 Reading Guide 1.3 Description of Warning Signs 1 1 2 2.Product Introduction 2 2.1 Model Description 2.2 Serial Number of Products 2.3 Principle of Operation 2 2 3 3. Remote control 3 3.1 Remote Control Type 1 3.2.1 Startup 3.2.2 Det ailed Description on Screen of Remote Controller 3.2.3 Description on Key Functions of Remote 3.2.4 Detailed notes to the operation of remote control keys 3 .
4.5.3 Battery charging procedure 4.5.4 High or low battery temperature 4.5.5 Notes on transporting battery 4.5.6 Other notes for using battery 5 . Safety Notes for Robstep M2 5 . 1 Weight Limit for Driver 5 . 2 Maximum Driving Distance 5 . 3 Driving under High or Low Temperature Environment 5.4 Uphill or Downhill Driving 5.5 Speed Limit 5.6 Abnormal Conditions 5.7 Safe Stopping 6.Steps to Drive Robstep M2 6.1 Startup of Transporter Body 6.2 Steps to Drive 6.3 Driving Practice 6.
1. Overview 1.1 General ◆ ◆ ◆ ◆ ◆ ◆ Introducing characteristics and principles of Robstep M2 Describing safety and warning information Introducing every part and component of Robstep M2 Notes for safe driving Providing driving methods and skills in detail Providing maintenance and servicing methods in detail 1.2 Reading Guide ◆ This manual is designed to help you use Robstep M2 correctly. For detailed and comprehensive information, please watch the video tutorial for safe driving.
1.3 Description of Warning Signs When reading this manual, please pay special attention to the following warning information: ! WARNING ! NOTE Warning: The user's improper operation may cause injury Note: Items and using methods requiring attention of the user 2. Product Introduction 2.1 Model Description ◆ The product you purchased is the Robstep M2 two-wheel electric human transporter with dynamic balance developed and produced by Robstep.
◆ Method to acquire the serial number: Acquire from the packing case or the SN registration card (please take care of the serial number after acquisition). 2.3 Principle of Operation ◆ Robstep M2 mainly comprises the transporter body, wheels and a circuit system.Wheels are installed on both sides of the transporter body, and modules of the circuit system such as the power supply, a control circuit, a driving circuit, sensors and a control switch are installed in the transporter body.
! ◆ ◆ ◆ ◆ ◆ NOTE It is recommended that you charge the remote controller fully before use at the first time. Please make sure the battery of the transporter body is installed correctly before you operate the remoter controller. Please make sure the charging port and the data plug are dry before you charge the remote controller. The time to fully charge the remote controller is 4 hours, and overcharging has adverse effect on performance of the battery.
3.1.
3.2.3 Description on Key Functions of Remote Nam Power-off Key Name Function ◆ Hold down the key for 4 seconds to power off the remote controller Mute Key ◆ Press the key to power off the transporter body Name Startup Key for Normal Mode ! Function ◆ Hold down the key to mute or unmute the transporter body (prompts such as errors, warnings, etc.
3.2 Remote Control Type 2 ◆ This type of remote control is powered by replaceable batteries, and its maximum remote-control distance is 10 m. In this range, Robstep M2 can be controlled remotely in operation. 3.2.
3.2.
4.Information about Robstep M2 4.1 Main Parts ◆ A whole Robstep M2 mainly comprises the handle, a stretch rod, the transporter body, the battery, wheels, etc. The transporter body comprises a display panel, a grip, a foot pad, etc.
4.2 The information on the handle grip display interface (this part is optional; use according to your configuration) ◆ M2 with a displayed handle grip is aimed at giving users a better driving experience, and the touch intelligence operations are stylish, fashionable and high-tech.
◆ When M2 is in shutdown/locked/charging status, the handle grip will shut off its display without any key operations within 1 minute and enter sleep status without any key operations within 30 minutes ◆ The handle grip will enter into sleep status when the battery charge is low ! NOTE ◆ If the handle grip enters into sleep status, press any touch key to wake it up. 4.2.
4.3 Information about Display Panel ◆ The display panel of Robstep M2 shows the operation status of the transporter body. Indicator of remaining capacity Indicator of startup Indicator of WIFI Indicator of system Indicator of faults 4.4 Foot pad ◆ When the transporter body is started up, it automatically keeps balance if the user steps on the foot pad of Robstep M2.
4.5 Batter y ◆ This section mainly introduces the specifications, correct charging method, serving method, safety notes, etc. of the battery of Robstep M2. 4.5.1 Specifications of Batter y Battery Type 4.4Ah Lithium Battery 6.6Ah Lithium Battery Charging Time Around 4 hours Around 6 hours Voltage 72v 72v Weight of Battery 2.0kg (only for reference, be subject to actual battery) 3.0kg (only for reference, be subject to actual battery) Initial Capacity 4.4Ah 6.6Ah Size 65±0.
4.5.2 Capacity Depletion of Battery ◆ When five green LED indicators on the display panel extinguishes, the capacity of the transporter body of Robstep M2 is very low, the transporter body produces a voice prompt "The transporter body is almost out of battery, please get off", the system decelerates automatically, and the user must stop driving at this time because the transporter body will be powered off automatically after 7 seconds.
◆ ◆ ◆ ◆ ◆ Please keep the environment for charging clean and dry. Please do not charge if the charge port is wet. Please do not throw the battery into a fire, heat the battery, or store the battery under high temperatures. Please do not throw the battery into water, and keep it dry during storage. Please do not insert conductive articles into the charge port, or electronic devices in the transporter body may be damaged due to short circuit. ◆ Please do not disassemble the battery or modify it. 4.5.
◆ If you will not use Robstep M2 for a period of time, please store it after full charge and charge it every three months or more frequently. ◆ When the battery is used up, please charge it in time, or the battery may be damaged due to over-discharge. ◆ When the capacity of the battery is low and the transporter body produces a warning and automatically decelerates to stop, please stop driving immediately and charge the battery. Before charging, please do not try to use Robstep M2.
5.Safety Notes for Robstep M2 ◆ We hope all drivers drive Robstep M2 safely and enjoy the driving. All previous experiencs on learning how to drive bicycles and cars, ski or use other similar traffic tools are suitable for our product. ◆ You can drive Robstep M2 safely following related contents of the manual and the video tutorial for safety driving.We strongly recommend you read the manual carefully and watch the video tutorial for safe driving before driving Robstep M2 at the first time.
◆ Proper charging and servicing of the battery is helpful to increase the driving distance, or the driving distance will decrease. ◆ The driving distance increases during downwind driving, and decreases for upwind driving. 5.3 Driving under High or Low Temperature Environment ◆ When you drive Robstep M2 under high-temperature environment, parts and components such as the motor, the battery, the driving system, etc.
! WARNING ◆ Please do not drive erratically or turn on a slope, or the balance angle of Robstep M2 may be offset to affect driving safety. 5.6 Abnormal Conditions ◆ When the system generates a prompt for depleting the battery or safe stopping, please stop driving Robstep M2; if you do not stop, Robstep M2 can not keep balance due to low capacity, and the driver may suffer injury. ◆ When the capacity of the battery decreases to the minimum, please stop driving.
6.Steps to Drive Robstep M2 You should pay attention to related safety notes during using Robstep M2. Thus, you must fully understand all notes in this manual before driving, and it is very important to understand these safety notes before using. ◆ Before using, please make sure Robstep M2 is assembled, and charge the battery continuously for more than 4 hours. For installation of specific parts and charge of the battery, please see this manual.
6.2 Steps to Drive Step 1: Start Robstep M2 First, please use the remote controller for startup.Then, the indicators of remaining capacity, startup and system on the display panel light up, and the transporter body produces a voice prompt indicating normal startup.
Step 3: Control movement of Robstep M2 First, after you stand on Robstep M2 stably, please keep Robstep M2 static. Then, you can slightly lean forwards or backwards to control Robstep M2 to move forwards or backwards. Please remember that the leaning range should be small. 1 2 Step 4: Control the transverse direction of Robstep M2 When you swing the handle of Robstep M2 to the left, Robstep M2 turns left; when you swing the handle to the right, Robstep M2 turns right.
Step 6: Get off You should stop Robstep M2 before getting off, when one foot touches the ground, the other foot leaves the foot pad quickly, and the transporter body enters the non-riding mode after producing a voice prompt. ! WARNING ◆ Please do not shake the handle violently, or the probability of accidents may increase. ◆ Please do not suddenly change the gravity center of the whole body backwards during stopping, especially on smooth roads.
6.4 Correct Driving Posture ! WARNING ◆ Please drive following the guide for correct operation, and practice frequently. ◆ When the traffic is heavy, please get off and walk to reduce the occurrence probability of accidents as much as possible.
7.Maintenance and Servicing of Robstep M2 ◆ The user needs to perform routine maintenance of Robstep M2.This chapter mainly describes steps and important prompts to service or maintain Robstep M2. ! WARNING ◆ Before performing the steps below, please make sure the power supply and the charging cable of Robstep M2 are disconnected.When the transporter is powered on or the battery is charged, please do not perform the steps below. 7.
! NOTE ◆ For safe driving, after the service life of the whole transporter is reached (the driving distance reaches 25,000km, and the using frequency of the battery exceeds the normal using frequency), when you start Robstep M2, the transporter body will be powered off automatically after the system warns for errors automatically. 7.3 Cleaning Notes before Cleaning: ◆ Please make sure the power supply and the charging cable of Robstep M2 are disconnected.
8.Parameters of Robstep M2: Remarks Robstep M2 Maximum Cruising Speed 15km/h 1 Cruising Distance 20km 2 Maximum Climbing Angle 15 1 The maximum cruising speed can be configured by an application. During driving, the transporter keeps dynamic balance and runs at a speed larger than the maximum cruising speed in a short time. 2 Net Weight 15.8kg Load 20-120kg Minimum Turning Radius 0m Whole Size 140*53*45.
9.Front, Top and Left Views and Size of Robstep M2 53 CM 45.
10. Fault Treatment When Robstep M2 has a fault or you suspect a fault that you cannot repair, please contact the service center of Robstep for repair. Wishing you a pleasant user experience The version of this M2 manual: V1.1. All the information in the manual (until the date when this manual is printed) is up-todate information.
Dongguan Robstep Robot Co., Ltd. Customer service hotline: +86-769-2662-1018 Official site: www.robstep.com Email: info@robstep.
FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada’s licence-exempt RSSs.