Remote Fingerprint Lock Tuya App User Manual
1 6.1 How to set up Smart Lock User Manual How to enter management mode Welcome 10:00 2019-01-01 1、Touch the key area, and the keyboard light is on; 2、Press [0+# ] and voice prompt: "System setting please authorize. Touch button area (Default management password“0123456789”) Tip: the factory default "experience mode", any fingerprint/password/card can be opened, please add administrator information ASAP.
User Manual Add administrator 0 1、Touch the button area, the keyboard light on. 2、Press [0+#], voice prompt "system setting please authorize" to enter the management fingerprint/password or card, press "#" to confirm. (default password "0123456789") * 0 3、Select " User Manage" and press"# ", press "8" to select "User01" (Admin) "" to "Key management "and press "# "，select "Add " and press "# "to enter the fingerprint/password or card.
User Manual Record Unlock mode setting 0 1、Touch the button area and the keyboard will light on. 2、Press [0+#], voice prompt "system setting please authorize" to enter the administrato fingerprint/password or card.press "#" to confirm. 3、Press "8" to select "Security" and press "#". One key -any fingerprint/password or card can be opened * Two key -two fingerprints/passwords or cards are required to open the door. Two user- require two different users' fingerprints/passwords or cards to open the door.
User Manual Opening stadus User Manual Emergency power supply method Set opening stadus: Use any one of the administrator fingerprint/password or card to open the door. Press the "2" and "8" keys when the keyboard lighton. 1.Chinese 2.English If the battery is out of power and the door lock does not work properly, you can connect the power bank by Micro-USB 5V . into charging line connect the into the emergenly power interface under the outer panel and unlock it in the nomal way.
User Manual User Manual 2、Mobile phone distribution network operation Wi-Fi Smart Network Lock APP Instructions Software name:Tuya Smart Two: Wi-Fi intelligent network door lock function introduction Features Full link communication encryption Explanaton App-server-wifi module, all communication links are encrypted, eliminating communication security risks Opening record Unlock mode + unlock code + time, the user can query the opening record of the past 12 months thouch the app, no data loss, suppo
User Manual User Manual 3、APP mobile phone function introduction 1. The homepage includes remote opening, message, member management, door opening record, temporary password and other functions. 2. Remote unlock should send the request from hardware of lock.Press doorbell then the "Click Dynamic password Click Get to get the dynamic password. After you get it, you can quickly copy the password text. open remotely" will show on the App.
User Manual User Manual 3、APP Function Instruction Notice center Member Management Notice center include alarm notice、 dialing notice and wrong unlock information recorded. 13 You can add and delete member to manage your lock,but only the administrator have the authority. Unlock recorded All unlocked record will be recorded in inverted. If the unlock user have connected will show it connected name,but if not connected will show it real name.
User Manual User Manual 3、APP Function Introduction Main door Temporary Code 1、Through the App you can add and delete the temporary code and every times’operation you must operate on the lock in the same time. 2、You can choose if send text by mobile or not.(Now,APP support domestic and international text) 15 Restore factory setting 1、Click upright corner of main interface into meau,downward find the“Restore factory setting”button ,then click.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
