User Manual PID#:111383/384/385/386/603-109289 PID#111646/47/48/49/50-109289 PID #: 111625/626/640/628-109289 Rev.
To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user manual. Date of Purchase: ________________________________ Product Rev. Number (located below the UPC on the package): ____________________ FCC RADIATION NORM FCC This device complies with Part 15 of the FCC Rules.
PACKAGE CONTENTS Your new mouse will ship with the following items: - 2.4GHz Wireless Optical Nano Mouse - Nano Receiver - 2 AAA Batteries - User Manual - Warranty Information SYSTEM REQUIREMENTS Please be sure that you meet all of the system requirements below to avoid difficulties during installation Compatible with: PCs, Mac® computers, and Chromebook™ notebook computers Works with: - Windows® XP, Windows® Vista ,Windows® 7 and Windows® 8 operating systems - Mac OS X® 10.
INSTALLING BATTERIES To properly install batteries into your mouse, please follow the instructions below: 1. Remove the battery compartment cover from your mouse. 2. Install two AAA batteries into the battery compartment following the orientation guide in the battery bay. 3. Replace the battery compartment cover back onto your mouse until it locks securely.
INSTALLATION For All Operating Systems 1. Make sure you have successfully installed the batteries into your mouse. Refer to the Installing Batteries section in this manual if necessary. 2. Pull out the Nano Receiver stowed in the bottom of your mouse. 3. Turn on your computer and plug the Nano Receiver into an available USB port on your computer. (If you are not able to find a USB port on your computer, please refer to the user manual of your computer for more detail.
DOWNLOADING TILT-WHEEL SETUP SOFTWARE In order for the tilt-wheel function to work on your mouse you MUST download the setup software from the Gear Head website. 1. Go to the Support page (http://pcgearhead.com/support.php) on the Gear Head website and click the DOWNLOAD: DRIVERS, MANUALS, OR SOFTWARE button. 2. Find Desktop Mice and click Select Category.
3. Find Model MPT3000CLR or MPT4000ART or MPT3000NEOand click get downloads…. 4. A pop-up window will appear to initiate the download; click Download to start downloading. (Note: Check the FCC ID number on the rating label which is located under the mouse. Then follow FCC ID number to download relevant software.
5. Follow the onscreen instructions to download the setup software. INSTALLING THE SETUP SOFTWARE 1. Decompress the downloaded software and click the Set Up icon to begin installation. 2. The USB Optical Mouse - InstallShield Wizard will appear on the desktop. Choose your installation language on the following screen and click Next to continue. 3. Follow the onscreen instructions to finish the software installation. Please restart your computer after the installation is finished.
Button Assignment Advanced Functions You can assign a function to any button of your mouse by selecting from the functions stored in the drop-down menu of each button.
Reset Current Profile Change the current settings shown on the software screen back to the default settings. You can store up to 5 different configurations with this software. Select a number then change the configuration in the Button Assignment and Advanced Mousewheel Options menu. Next click Ok under the Advance Config Options menu to save your settings to that profile.
WARRANTY INFORMATION Limited Lifetime Warranty Gear Head, LLC warrants that this product shall be free from defects in materials and workmanship for the reasonable lifetime of the product. If the product is defective, Gear Head, LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this warranty, to repair or replace any parts deemed defective. This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable.
