User's Manual

ManualsBrandsDongguan ming pan Electronic technology ManualsComputers & AccessoriesWireless Keyboard

RF2.4G wireless keyboard with touch pad Instruction

RF2.4G wireless keyboard dongle:

When turn on,press FN+ESC for 2 seconds and the blue

LED will blink,then insert USB dongle to computer,it

will pair automatically

The keyboard is powered by 3.7V Lithium-ion Polymer

Battery.

1，LED light

Blue LED light：

Pairing tips：Blue LED light fast flash。

Charging tips：Blue LED light slowly flash，

power on but without connection status：flash for 8 times

then light off

low voltage tips：voltage is low to 3.4V,Blue LED light

flash。

2，on off function

Put the button on,the keyboard is power on

Put the button on,the keyboard is power off

3，sleeping function(saving power function):

If you didn’t use the keyboard for 20 miniutes,the

sleeping function is automatically on,when you use the

keyboard,it will connect automatically.

Summary of content (3 pages)

PAGE 1
RF2.4G wireless keyboard with touch pad Instruction RF2.4G wireless keyboard dongle: When turn on,press FN+ESC for 2 seconds and the blue LED will blink,then insert USB dongle to computer,it will pair automatically The keyboard is powered by 3.7V Lithium-ion Polymer Battery. 1，LED light Blue LED light： Pairing tips：Blue LED light fast flash。 Charging tips：Blue LED light slowly flash， power on but without connection status：flash for 8 times then light off low voltage tips：voltage is low to 3.
PAGE 2
4，key function: the same as layout 5，backlight function： FN+up KEY，make the white backlight lighter FN+down KEY，make the white backlight darker 6,touchpad instruction: Use one finger to slip on touchpad,the cursor moves Use one finger to click on touchpad,it means click mouse’s left key Use two fingers to click on touchpad,it means click mouse’s right key Use one finger to double click on touchpad,it means double click mouse’s left key Use one fingers to click and drag on touchpad,it means drag Use two f
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.