User's Manual

RF2.4G wireless keyboard instruction

RF2.4G wireless keyboard dongle:

When turn on, press FN+ESC for 2 seconds and the blue

LED will blink, then insert USB dongle to computer, it

will pair automatically

1.LED light

Blue LED light：

Uppercase & Lowercase status：

caps blue LED on means Uppercase status

caps blue LED on means Lowercase status。

Caps number status：

Number blue LED on means number function。

Number blue LED off means special function。

Low voltage tips：when the voltage is as low as 2.1V, blue LED

flash。

2.pairing function

Insert USB dongle, press ESC+K,LED flash, when pairing is

successful, LED is off.

3.sleeping function(saving power mode):

5 minutes without using the keyboard, sleeping function is

automatically on, click on any keycaps, it can connect

automatically

4.keycaps function: the same as layout

Battery Type: Two AAA Batteries

PAGE 1
RF2.4G wireless keyboard instruction RF2.4G wireless keyboard dongle: When turn on, press FN+ESC for 2 seconds and the blue LED will blink, then insert USB dongle to computer, it will pair automatically 1.LED light Blue LED light： Uppercase & Lowercase status： caps blue LED on means Uppercase status caps blue LED on means Lowercase status。 Caps number status： Number blue LED on means number function。 Number blue LED off means special function。 Low voltage tips：when the voltage is as low as 2.
PAGE 2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.