User's Manual

RF2.4G wireless keyboard with touch pad function

RF2.4G wireless keyboard dongle:

When turn on,press FN+Backspace for 2 seconds and the

blue

LED will blink,then insert USB dongle to computer,it

will pair automatically

1，LED light

Blue LED light：

Pairing tips：Blue LED light fast flash。

Charging tips：Blue LED light slowly flash，

power on but without connection status：flash for 8 times

then light off

low voltage tips：voltage is low to 3.4V,Blue LED light

flash。

2，on off function

Put the button on,the keyboard is power on

Put the button on,the keyboard is power off

3，sleeping function(saving power function):

PAGE 1
RF2.4G wireless keyboard with touch pad function RF2.4G wireless keyboard dongle: When turn on,press FN+Backspace for 2 seconds and the blue LED will blink,then insert USB dongle to computer,it will pair automatically 1，LED light Blue LED light： Pairing tips：Blue LED light fast flash。 Charging tips：Blue LED light slowly flash， power on but without connection status：flash for 8 times then light off low voltage tips：voltage is low to 3.
PAGE 2
If you didn’t use the keyboard for 3 miniutes,the sleeping function is automatically on,when you use the keyboard,it will connect automatically.
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.