Installation Instructions

Pairing with video doorbell
1. Power the doorbell by using a USB adapter (not included) close to the
video doorbell. After installation, you can relocate the door chime.
2.Open the app “Tuya Smart” on your mobile device.
3.Add the video doorbell on the app.
4.Press and hold the playing button and cycle select button for 3s, until the
indicator turn red, then press the call button on video doorbell in 15s to
connect the chime to the doorbell, then the indicator off and chime ringing.
5.Test the device by pressing the doorbell button on the video doorbell.
6.Relocate and power the doorbell anywhere else within a range of
30meter.(Open environment) from the doorbell.
Volume selection
Cycle play and select the volume by short pressing the Playing button and
Cycle select button at same time. There are 3 level ringing volume.
Melody selection
The chime device provides a choice of 20 different melodies. When the
chime is powered, press the Cycle select button to play next music until you
hear the one you like.
Clean all pairing memory
Press and hold the Playing button and Cycle select button until plug into the
USB slot for 3s, the indicator will be flashing red, after the indicator off it
means the clean operation successfully, then you can release the two
buttons.
Smart Door Bell
SMART1