Specifications

P9
PROXA PBuds700
Wireless Bluetooth Earbuds
Instruction
LED Indicator：
P10
P11 P12
Cautions :
• Do not use PBuds while around medical equipment.
• Please read and comply with the regulations when using PBuds on the flight.
• Do not use PBuds while around automatic door or fire alarm appliance.
• Do not disassemble, reassemble and repair this product.
• Do not operate PBuds in a humid environment.
• Do not put any object into this product.
• Do not expose PBuds to fire or excessive temperature.
• Please keep PBuds away from children.
• If you feel uncomfortable while using PBuds, please stop immediately.
P5
Earbuds functions :
*Both earbuds offer the same functions except for
”
Manually power on (Tap and hold for 5 secs)
”
,
and
”
Factory default setting
” .
Power on
Remove from the charging case / Tap and hold for 5 secs
(Each side power on separately)
Power off
Place in the charging case / Tap and hold for 5 secs
(Both sides power off simultaneously)
Reset to factory
default setting
(All pairing list will be
cleared)
Each side reset to factory default setting separately
Step 1: Tap and hold earbuds for 5 secs to power off
Step 2: Tap and hold earbuds for 7 secs until hear
”
Pairing mode
”
Step 3: Tap 7 times, hearing
”
Power off
”
and indicating sounds
Pair two earbuds
Put two earbuds close to each other (Within 0.78 inch / 2cm)
for automatic pairing (Within 6 secs)
English / Chinese voice
prompt exchange
Four taps (Not on the phone)
Activate voice assistant Tap and hold either side of earbuds for 3 secs
Power off automatically
Earbuds will automatically power off, if it is not paired with
smart phone for 5 mins
Low Battery notification
(Earbuds)
P6
* Both earbuds offer the same functions.
Call functions :
Incoming call Indicate by smart phone
Answer / End a call Tap and hold for 1 sec and hear a
”
DU
”
sound
Decline an incoming call
Switch between smart phone
and earbuds
Double-tap
Triple-tap (While on the phone)
Cut off the ongoing phone Tap and hold for 1 sec and hear a
”
DU
”
sound
Answer a second incoming
call and put current call on hold
Answer a second incoming
call and end the current call
Double-tap
Double-tap
End the current call and
switch to the other calls
Tap and hold for 1 sec and hear a
”DU” sound
Second incoming call (While on the phone)
Switch between two calls
Tap and hold for 1 sec and hear a ”DU” sound
P7
*Both earbuds offer the same functions except for ”Volume adjustment” and
”Track selection” .
*While the charging case is disconnected to the charging cable and without
earbuds inside, press the button above ”PROXA” to know the battery status
of the case.
Media functions :
Play / Pause
Tap and hold for 1 sec and hear a
”
DU
”
sound
Volume up Double-tap on the right earbud
Volume down Double-tap on the left earbud
Next track Triple-tap on the right earbud
Previous track Triple-tap on the left earbud
P8
Specification :
・Bluetooth5.0
・Dimensions : L1.622 * W0.662 * H0.688 (inch) /
L41.20 * W16.74 * H17.33 (mm)
・Charging time : 1.5 hours
・Usage time : 2.5 hours
・Battery capacity : 30mAh
・Battery : lithium-ion polymer battery
・Dimensions : L2.26 * W1.81 * H0.95 (inch) /
L57.40 * W46.00 * H24.00 (mm)
・Input : DC5V / 400mA
・Output : DC5V / 150mA
・Battery capacity : 500mAh
・Battery : lithium-ion polymer battery
Charging case
Earbuds
P2
Contents :
Charging case
Charging port : Charge the case by connecting with Micro USB cable.
LED indicator : Indicate charging status.
LED indicator button : Press to know the battery status through LED indicator.
Accessory
Micro USB cable
Wireless earbuds
Compatible with
iOS / Android / Windows / Mac OS system
Charging port
Touch control area
Charging case
LED indicator
LED indicator button
P3
Charging Instruction :
1. After unboxing, please charge the charging case and earbuds.
2. Place earbuds into the charging case, and close the case.
3. Connecting the case with Micro USB cable to charge.
Micro USB cable
P4
Pairing :
1. To power on, remove earbuds from the charging case.
2. Turn on Bluetooth from smart phone and connect with ”PROXA PBuds700” .
* The Bluetooth connection supports up to 8M for your smart phone and earbuds.
FCC Compliance Statement :
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT : The Federal Communications Commission warns that changes or
modifications of the unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
PROXA PBuds700 Connected
Charging
case
Earbuds
(Place in
the case)
Charging Fully charged
Out of battery
Sufficient power
Blinking Green
(Cable connecting)
Solid Green
(Cable connecting)
Solid Blue Blue LED off
Blinking Blue Solid Blue
Pairing Error
Step 1: Reset to factory default setting (See below steps) and place
earbuds back to the case for 10 secs
Step 2: Pair two earbuds again as above (See
”
Pair two earbuds
”
)
Once earbuds indicate
”
Battery low
”
, it will power off within
1 min
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Model: PB700
FCC ID: 2AVC7-PB700