9 SOLAR LOYAL LIMITED TIL-9110 2.4G controller manual Thank you very much for purchasing this controller which is a new design, compatible PC, Android,PS3,switch. Please read the manual carefully before using it and save it for later use. Content 1. Controller *1 2. 1M USB-C charging cable *1 3. Instruction manual *1 4.
USB Cable Receiver FEATURE ou newness 10. 11. 12. Compatible with Nintendo switch console, PC, PS3, Android.
PC mode key layout Back button Left joystick: It is set in the different game according to the customer favorite. The lower key is the L3 key. Directional pad: 8-way point of view control button / Turbo button setting: 1.Hold the key which you want to set it into turbo function, then press TURBO key one time. Backbit red flashing, is set successfully. 2. Hold the key which you have set turbo function, then press TURBO key it can clear turbo setting. And the back ring to blue. 3.
Home button Hold the "home" button for 5 seconds to turn it off The function back light LED . Hold down seconds back light LED to turn off. Hold down L+R again, 5 seconds back light LED and Changeling. Right joystick: It is set in the different game according to the customer favorite. R3 button is right joystick button. Note: Linear pressure . buttons, according to the Back light . difference in button 1. When starting up normally, blue pressure, produce back light is on.
Back light LED Brightness Adjustment A total of 5 blocking, 1 blocking "luminosity 100 %, 2 blocking luminosity 75 %, 3 blocking luminosity 50 %, 4 blocking luminosity 25 %, 5 turning off back light The operation method is as follows 1. Press the LED switch and add one gear. If you at the second gear, it becomes 3 gear. (Note: Gear position is cyclically switched.) Note: The ring LED and ABLY are both brightened and weakened. In the TURBO mode, the circular red LED also weakened and strengthened.
Reset switch Remapping M Buttons Switch mode: M1 default B key, M2 default A key, M3 default Y key, M4 default X key(switch mode does not support programming function) PC, PS3, Android mode:
Mode A (Remap function) : M1 operation 1) Press M1 first and holding not release then press back, red back light is on, now in setting status 2) Holding any button you want to set function, for example L1, R3 3) Press M1 again to confirm setting, red back light will be off, the setting successfully completed, now if you press M1, it is actually with L1 and R3 function 4) Multi function button can be set on those buttons, any of them can be set together, A,B,X,Y,L1,L2,L3,R1,R2,R3, you can set several multi f
PC Input wireless mode connection Settings * 1.Press "HOME" button, channel LED, LED, LED, LED flashing, in pairing. 2.Insert the receiver into the computer USB, controller began to mate with the normally on, the connection is successful. 3.Enjoy your game on your devices Channel LED: If controller is paired,when the battery voltage is lower than 3.5 V, channel LED flashing warning lower power, and close the vibration function.
PC wired mode connection Settings : L.Insert USB cable directly to the computer USB port . 2.When channel LED and LED is normally on ,connection is successful . 3.
PC Input wireless mode connection Settings : 1.Press "HOME" button , channel LED, LED, LED, LED flashing, in pairing. 2.Insert the receiver into the computer USB, controller began to mate with the normally on, the connection is successful. 3.If iris not LED + LED, hold the HOME key for 5 seconds until LED + LED is on. 4.Enjoy your game on your devices PC Channel LED: If controller is paired,when the battery voltage is lower than 3.
PC Input wired mode connection Settings : 1.Insert USB cable directly to the computer USB port. 2.When channel LED and LED is normally on ,connection is successful . 3.
Android wireless mode connection Settings : OTG CABLE 1.Receiver connection OTG line 2.The OT G line is directly inserted into the USB port = of the phone, and the LED + LED 3 is on.The Tablet connection is successful. Phone 3.If it is not LED + LED, hold the HOME key for 5 seconds until LED + LED is on. 4.Enjoy your game on your devices Note: 1.The mobile phone or tablet to support OTG function and use OTG cable connection. 2.The current android game does not support the controller vibration function.
Android wired mode connection Settings : ° Phone Tablet OTG CABLE { ~ [2 1.Controller connection OTG cable. 2.The OT G line is directly inserted into the USB port of the phone, and the LED + LED 3 is on.The connection is successful. 3.If it is not LED + LED, hold the HOME key for 5 seconds until LED + LED is on. 4.Enjoy your game on your devices Note: 1.The mobile phone or tablet to support OTG function and use OTG cable connection. 2.
The switch connection/pair Settings : 1.0n your Nintendo switch ,select the menu item "Change Grip and Order” 2. The receiver is directly inserted into the USB 2.0 port of the Nintendo host charging seat. 3.Press "HOME" button, channel LED, LED, LED, LED flashing, in normally on, the connection is successful. 4.Enjoy your game on your devices SWITCH mode key layout: Corresponds — key Corresponds + key =, Corresponds Y key Corresponds X key Corresponds A key Corresponds B key Corresponds Capture key 1.
Use the cable connection Settings : 1.0n your Nintendo Switch,select the menu item"System and Controller wired TV Communication"is on. 2.Insert USB cable directly to the Nintendo switch charging dock. 3.When channel LED stay on connection = is successful . 4.Enjoy your game on your daa Ae {lr Switch the tablet N | The original adapter Note: Nintendo Switch the console only support 2 wired controller. USB 3.0 does not support wired controller.
Channel indicate : The switch can connect 8 controller: The first controller: LED is normally on. The second controller: LEDERBERG is normally on. The third is normally on. The fourth is normally on. The fifth is normally on. The sixth is normally on. The seventh is normally on. The eighth is normally on .
PS3 wireless mode connection Settings : 1.Insert the receiver into the PS3 USB port. 2.Press "HOME" button, channel LED, LED, LED, LEDA flashing, in normally on, the connection is successful. 3.Press HOME to confirm Corresponds SELECT key Corresponds START key Corresponds square key Corresponds triangle key 2X0 \ Corresponds Circle key \ Corresponds Cross key Channel LED: If controller is paired, when the battery voltage is lower than 3.
PS3 wired mode connection Settings : 1. Insert the USB cable directly into the PS3 USB port. 2.When the LED is on, the connection is successful. 3.Press HOME to confirm 4.
FCC Caution. § 15.19 La belling requirements. This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modification warning. Any Changes or modifications not expressly approved by the party responsible for compliance could valid the User's authority to operate the equipment.