Use Instructions

Magnetic wireless charger manual
Thank you for purchasing and using our products, to ensure that this product works for you
Bring a better user experience, please read the manual of this product first, and
Please also refer to the instruction manual of your mobile phone or electronic product.
Specification Description:
Interface type: type-c
Input parameters: 5V 3A, 9V/2A, 12V/1.5A (QC/PD/AFC)
Output power: 5W, 7.5W, 10W, 15W (Max 15W)
Product size: 61*6.5mm
Product unit weight: about 45g
Color: White
Instructions for use
1. Connect the power cord to the Type-C adapter, and then plug the power adapter into
Socket;
2. Place the mobile device that supports wireless charging in wireless charging
Regionally.
Note: If you need to realize the wireless fast charging function, you can purchase the PD protocol
Type-C port adapter. (Mobile devices must meet the Qi standard before they can be used)
Precautions
1. Do not squeeze or bump the product forcefully.
2. Do not disassemble, disassemble or modify by yourself.
3. Do not put the product near the fire source or throw it into fire or water.
4. Do not use wireless in severe high temperature, humidity or corrosive conditions
Charger, avoid damaging the circuit and causing leakage.
5. Do not place it with magnetic cards (identity cards, bank cards, etc.) with magnetic strips or chips
Too close to avoid magnetic failure.
6. Do not put metal or metal phone cases on the wireless charger.
7. Please keep implanted medical equipment (pacemaker, implantable cochlea, etc.) and no
The distance between wired and wireless charging is at least 20cm to avoid damage to medical equipment
Cause potential interference.

Summary of content (3 pages)