Use Instruction

Light up Wireless
Optical Mouse
Instruction Manual
1 x Light up Wireless Optical Mouse
1 x USB Wireless Reciever
1 x Instruction Manual
1 x Micro-USB charging cable
Interface: USB 1.1/2.0
Operating System: Windows 98/ME/2000/
XP/VISTA//Win7/Win8/Win10/Mac
Auto-sleeping and power sleeping fuction,
device will automatically sleep if inactive
for a set amount of time and will reactivate
once any key is pressed.
Optical mouse could have operating issues
For the best operation, please use a
mouse pad.
Charging the Wireless Mouse:
Charge the mouse fully before usage.
Connect the provided charging cable to a
power source and to the Micro USB port (5)
on the mouse.
Once connected the LED Indicator will
begin to glow red when charging, once fully
charged LED will turn OFF.
Turning OFF / ON / Light up Function:
Turn ON the mouse by moving the ON/OFF
switch to the middle position.
Move to the far right position to turn ON the
mouse with light up function.
Move to the far left to turn OFF the mouse.
Wireless Reciever Installation
Remove USB Receiver from the USB
Reciever Port underneath the mouse.
Once removed, take USB Receiver and
insert into the USB port of the notebook
or PC.
Computer will identify the reciever
automatically, Wireless mouse will begin
installation instructions.
Once fully installed mouse will be ready
for uses.
*Note: If using a desktop PC, the distance
from workspace to computer could
cause connection issues to the receiver.
Suggestion would be to use a extended
USB Cable
DPI Button Function
Press the DPI Button to switch between
800 - 1200 - 1600 DPI.
DPI Function enables you to adjust the
mouse sensitivity to a faster or slower
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
WARNING–When using this product, basic
precautions should always be followed,
including the following:
Read all the instructions before using the
product.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above
Do not use the device if damaged or
explosion or risk of injury.
Do not disassemble the device. Take it to
or repair is required. Incorrect reassembly
or temperatures above 212ºF may cause
explosion.
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
1.
a.
b.
c.
4.
a.
b.
c.
2.
a.
b.
c.
3.
a.
*
(1)
(2)
*
1.
2.
3.
4.
5.
6.
7.
8.
•
•
1.
2.
*
What’s included:
Features:
Attention:Instructions: FCC Statement:
SAFETY PRECAUTIONS:
1.
2.
3.
4.
5.
6.
7.
8.
Scroll Wheel
Back Button
Forward Button
DPI Button
Micro-USB Input port
ON/OFF Switch
Optical Sensor
USB Wireless Receiver
9. Input voltage：DC5V
10. Input current：300mA
MADE IN CHINA
7142-24BK
FCC Warning Statement:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving
antenna.
‐‐ Increase the separation between the
equipment and receiver.
‐‐ Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
‐‐ Consult the dealer or an experienced
radio/TV technician for help.