Product Manual

Table Of Contents

HY-L03 Product Manual

1. Product introduction:

◇ HUB USB2.0 extension*4

◇ Wireless charging

◇ Touch button control

◇ 10 RGB lighting modes (with memory function):

1. Rainbow light mode 1 (Red, Green, Blue, Purple, Green, Yellow, White)

2. Monochromatic breathing light mode (red, green, blue, purple, green, yellow, white)

3. Rainbow light mode 2 (Red, Green, Blue, Purple, Green, Yellow, White)

4. Monochrome light mode(4.Red、5.Green、6.Blue、7.Purple、8.Green、9.Yellow、

10.White

◇ Dimensions (L*W*H): 80*30*4mm

◇ USB data cable: 1.8m (recommended to be inserted into the computer USB3.0 [blue]

interface)

2.Interface function:

a. TYPE-C USB 2.0 data transmission

b. USB 2.0 data transmission

c. Touch the button

d. Charging indicator

e. Wireless charging location

★Note: Not suitable for use with extended mobile hard disks(compatible with USB flash drive,

mouse, keyboard and other devices plug and play connection)

3.Button function:

a.Touch the key to switch or turn on the RGB light mode, touch (3 seconds) to turn off the

RGB light.

4.Wireless charging:

a.Standby: the blue indicator light is on, charging: the red indicator light is on (compatible with

PAGE 1
HY-L03 Product Manual 1. Product introduction: ◇ ◇ ◇ ◇ HUB USB2.0 extension*4 Wireless charging Touch button control 10 RGB lighting modes (with memory function): 1. Rainbow light mode 1 (Red, Green, Blue, Purple, Green, Yellow, White) 2. Monochromatic breathing light mode (red, green, blue, purple, green, yellow, white) 3. Rainbow light mode 2 (Red, Green, Blue, Purple, Green, Yellow, White) 4. Monochrome light mode(4.Red、5.Green、6.Blue、7.Purple、8.Green、9.Yellow、 10.
PAGE 2
most wireless charging mobile phones on the market). If the charging indicator light flashes red and blue alternately, it indicates that there is a metal foreign body in the charging position. After the foreign body is removed (3 seconds), the blue light indicates that it can be charged normally. 5.Product technical parameters: Power supply: DC 5V2A Output power: 5W Working temperature: 0°C~45°C Precautions a. This product must be used at rated voltage. b.
PAGE 3
user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.