Operation Instructions

Product introduction
Interface Functions
Product introduction
Key Functions
Product parameters
Operation Instructions
English
1. Charging indicator. 2. TYPE-C USB charging port. 3.AUX-IN input. 4. Headphone output.
1.Power/Mode: Press and hold for 2 seconds to power on or standby, short press to switch mode.
2.lay/Pause: Short press to pause or mute, press and hold for 2 seconds in Bluetooth mode for repairing, short press again for
reconnection with disconnected Bluetooth currently.
3.Previous: Short press for previous song.
4.Next: short press for next song.
5.Colorful Light: Short press to switch ten lighting modes in turn, press and hold for 2 seconds to shut on/off colorful light.
6.Volume Knob
1. Bluetooth pairing mode: Press and hold button to power on and enter the default Bluetooth mode with prompt tone. Bluetooth
speaker enters the state of pairing connection (automatic connection to the device connected last time) and the blue
decorative lights quickly flash in turn. Power on Bluetooth device (such as mobile phone and other playback devices) and
search new device for pairing, then the device labelled with “HY101” will be searched. Dialogue frame will prompt to ask
whether to make the connection, then press “YES” or “CONFIRM” to complete the connection. If password is needed to
make the connection, please enter the default password "0000" and confirm to complete the connection with prompt tone,
the decorative lights will also flash slowly.
2. Bluetooth Music Playback: In the Bluetooth mode, when the speaker is connected to the Bluetooth device and music file has
been added to the playlist, short press the Pause button to control the music playback in mobile phone (Bluetooth device); in
case of any incoming call, the music playing will be automatically paused and replayed after the call has been made.
3. Disconnected with Other Bluetooth Devices: In the Bluetooth mode, press and hold the Pause button for 2 seconds for
repairing Bluetooth and the blue decorative lights will flash quickly in turn; the decorative lights will flash slowly once the
connection is done.
4.AUX-IN Playback Mode: Short press the Mode button to switch and play the audio source input from external devices.
Charging and Low Battery Warning: The indicator light will stay on when charging and go out when fully charged. In case of
low battery, the “beeping” tone will be sounded and the device will automatically power off in case of seriously low battery; if
the product will not be used for a long time, it’s recommended to charge once every three months for the sake of longer
service life of lithium battery. When being charged, it’s recommended not to use the device to ensure the best performance
and enough charging time.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
●Audio Input Method: Bluetooth AUX
●Bluetooth Version: V5.0
●Effective Bluetooth Distance: ≥10m
●Charging Voltage: DC5V 1A
●Output Power: 8W
●Frequency Response Range: 60 Hz-20 kHz
●Stereo Isolation: ≥40dB
●Signal-Noise Ratio: ≥75dB
●Speaker Impedance: 4Ω
Control Method: knob + button
Security Information
1) Audio Device 2) Operating instructions 3)Audio signal line 4) TYPE-C charging cable
1.Only use the voltage specified as correct for the instrument.
2.Do not expose the instrument to extreme heat or humidity. Please keep it in a well ventilated and dry place.
3.When cleaning the instrument, use dry cloth. Do not use water, alcohol, gasoline and acid-base detergent. If any metallic
object is inserted or liquid is spilled into the product, the power supply should be cut off immediately. You can continue to
use this product only after professional inspection.
4.Do not attempt to disassemble the internal components in any way. If it should be repaired, please contact the local retailer
or after-sales customer service.
5.This product is only for indoor use. Verified operating temperature range: -10℃~45℃. Verified operating humidity range:
30~70%RH.
Packing list
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
HY101