User's Manual

ManualsBrandsDongguan Earson Audio Technology ManualsAudio EquipmentActive multimedia subwoofer system

W184xH184xD221mm

W86xH230xD74mm

SHTIB1046-BT

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Plug the 3.5mm audio cable into the 3.5mm audio input on the speaker system to begin the AUX-IN

mode.

If the 3.5mm audio cable not plug into the 3.5mm audio input will be Bluetooth mode and begin to pair

automatically. Using the native controls on your Bluetooth device, select the “SHTIB1046-BT” in your

Bluetooth settings to pair. If your device requests a password, enter the default password “0000”.

If the speaker system need to connected others Bluetooth device, should turn off the currently

connected Bluetooth device to start the pairing process again.

Plug the 3.5mm audio cable into the 3.5mm audio input on the speaker system to begin the AUX-IN mode.

If the 3.5mm audio cable not plug into the 3.5mm audio input will be Bluetooth mode and begin to pair

automatically. Using the native controls on your Bluetooth device, select the “SHTIB1046-BT” in your

Bluetooth settings to pair. If your device requests a password, enter the default password “0000”.

If the speaker system need to connected others Bluetooth device, should turn off the currently connected

Bluetooth device to start the pairing process again.

FCCID:RI5SHTIB1046-BT

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions:(1) this device may not cause

harmful interference, and (2)this device must

accept any interference received, including

interference that may cause undesired

operation.