Troubleshooting Guide

Congratulations on the purchase of your ECFPOWER
Smart Hose Faucet Timer! Faucet watering has
never been faster, easier or more convenient with
the ability to control it from your phone.
You can schedule, manually operate without
climbing through your shrubs to access the timer.
You can connect to your timer with the push of a
button via the home screen in the app. It also
allows you to water down to minutes, which is
great for gardening, hydroponics, filling pet dishes
or even bird baths.
Whatever your connected outdoor watering needs,
ECFPOWER provides best-in-class smart products to
help you more effectively manage and control your
watering. Thanks for your purchase, and welcome
to
ECFPOWER.
Meet the Hose Faucet Timer
Meet the App Home Screen
Hose Faucet Connection
Filter
Water inlet
ON/OFF Button
Fitting NH3/4
”
Range: 50ft without interference
Pressure operating range: 7.2-116 psi
Temperature operating range: 40.1
℉-113℉(4.5°C-45 °C）
For outdoor use with cold water only,
Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel cadmium) batteries. Used up or dead batteries must
be removed from the timer and disposed of properly.
If you don’t already have the Smart Life App on your smart
device, search for “Smart Life” and download the free Android
or IOS app.
Create an account or login with an existing account to begin
timer setup.
4) Add a Device
Initial Water Timer Setup
1) Insert Two AA Batteries
Batteries are not included and you will need two alkaline
AA batteries to power your timer.
2) Install the Timer
Connect the timer to an outdoor hose faucet.
Your timer is now ready to be used with any product
that can be attached to a standard hose faucet.
Do not place the timer in an underground valve
box or anywhere your Bluetooth signal will be
obstructed.
3) Turn on Your Water
The water must remain on for the timer to work
properly.
Additional Water Timer Features
Manual Watering
Your timer has the ability to allow you to manually water
without disturbing the programmed schedule. Manual
is used to test equipment, run an extra watering cycle
in an area, or to use the hose faucet without removing
the timer. Press the ON/OFF button to activate manual
watering. Using the app you can set how long you
want the preset manual cycle to run for.
Stop Watering
You can stop the flow of water at any time whether
it is during manual watering, or during a programmed
time. Press the ON/OFF button once to stop watering.
Rain Delay
Prevent watering when rain is in the forecast , you can
temporarily suspend your watering program for up to
24H, 48H, 72H using the rain delay feature. After the
selected delay has ended,your watering program will
automatically resume.
Setting
Weather
Battery Life
Next Schedule
Last Irrigation
Time
Running Status
Rain Delay Timing
Irrigation
Remote Control
Record
Enter configuration Mode
Long press the On/OFF button for 6s until the green light
flashes quickly, and then enter the pairing mode.
Tap "Add device" or "+" to add the smart device in app.
Select "Industry&Agriculture" > "Water valve controller(BLE)".
Initial Smart Life App Setup
1 2
3
4
5
9 10 11 12
6 7 8
Smart Water Timer
Waiting for connecting to be 100%. Edit the name of your
water timer completed.
LED Light
Outlet
Warm Tips
1. When expecting freezing temperatures, timer should be
removed from the faucet and stored indoors to avoid
potential freeze damage.
Troubleshooting
Q: Why the bluetooth water timer didn't turn on/off at
preset time
?
Q: Do i have to keep my phone continuously in range for
the timer to work
Q: Why irrigation recorded data will be lost?
A：
1. Programming is incorrect
2. Water pressure is too low
3. Particles of dirt or debris stuck in valve
4. Faulty valve
5. The faucet is off
6. The batteries is low
A: Once the program is set, it will run without your phone
being near the device. You do have to be in range to
change a program though
A: When the timer connection exceeds the distance, the
missing data. But does not affect the watering function of
the equipment
Support
If you have any questions about our product, please feel
free to contact us
. We will followup and respond within
24 hours.
2) Open the Smart Life App
1) Download the Smart Life App
Not suitable for drinking water
Press 6S until light flash
a. Rotate the front panel
c. Insert the 2*AA batteries d. Assemble as shown
e. Assemble as shown
f. OK
b. Pull out the front panel
3)
2. Please remember to clean the filter regularly and replace
it if worn.
3. The installation direction of the product is top in and
bottom out, otherwise the valve cannot be closed.
4. When installed, the rotary hose faucet connection, do not
rotate the product, otherwise it will cause the valve head off
Water Flow