Operation Instructions

Multi-frequency copy remote control operation instructions

1. Step 1: Press button A and button B at the same time (the green light is always on)

2. Part 2: Press and hold either button A or button B, release the other button and press it three

times in a row, release button A and button B, the red light will turn on for about 100ms and then

turn off.

3. Step 3: Press the button on the remote control that needs to be copied, and the green light

flashes when the copy is successful, indicating that the copy is successful. At this time, according

to the user's needs, copy it to the button A, button B, button C, and button D. Press a certain key.

A key to confirm, then the green light is on for about 3s, that is, the copy is successful

PAGE 1
Multi-frequency copy remote control operation instructions 1. Step 1: Press button A and button B at the same time (the green light is always on) 2. Part 2: Press and hold either button A or button B, release the other button and press it three times in a row, release button A and button B, the red light will turn on for about 100ms and then turn off. 3.
PAGE 2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.