Product Info

Thank you for purchasing our products.
Please read this manual carefully before use and keep it
properly for future reference.
Product Composition
Charging box
(Storage box)
The urine alarm consists of three parts:
Transmitter (urine detection): detect urine and send alarm information
to receiver bywireless way
Turn the switch to the right to turn on the receiver, turn it to the left
to turn off the receiver, andthe transmitter will always turn on by
default.
ON/OFF
Receiver alarm mode setting
Vibration mode setting:
Cl i ck t h e le f t bu t to n , th e s c r e e n d i s p l a y s th e n um b er 0 0 00 0 1, a n d
a sm a ll i c on a p pe a rs . Pr e s s t h e r i g h t b u t to n t o co n fi r m. T he s y st e m
au t om a ti c al l y re t ur n s t o t h e m a i n i n t e r fa c e, a n d th e s et t in g e nd s
Temperature display mode
Celsius display:
Press the left button four times, the number 000004 will be displayed on
the screen, and a small icon of
Celsius will appear. Press the right button to confirm, and the system will
automatically return to the main interface, and the setting will be finished
Fahrenheit display:
Press the left button four times, the number 000004 will be displayed on
the screen, and a small Fahrenheit icon will appear.
Press the right button to confirm, and the system will automatically return
to the main interface, and the setting will be finished.
Use of urine detection module
Open the button of urine detection module, and buckle the detection
module on underwear along the edge of underwear.
Alarm prompt
When the system gives an alarm, a small icon appears. The alarm
vibrates or sounds or vibrates +sounds according to the alarm mode set
by the user. The user presses any key to cancel the alarm, and the alarm
icon disappears and returns to normal.
Productcharging
Put the receiver and transmitter into the charging box, and plug in USB
for charging until the receiver battery is fully charged. When the indicator
light of the transmitter turns from red to green, the charging is finished.
Matters needing attention
1. When using the receiver's temperature and humidity function, the
receiver shall not contact or be placed ina special environment such
as a pocket, and the hole position of the temperature and humidity
sensor shall not be blocked. The receiver's temperature and humidity
function is invalid during charging.
2. The product is charged by standard DC5V
3. After charging, the receiver can be turned off when the product is not
in use to save power consumption.
Product introduction
It takes at least one week for parents to fully wake up their children after
they fall asleep for about one to two hours. And the alarm will help wake
up the children who sleep too well.
By taking a nap during the day, make sure that the child will not be
exhausted when sleeping at night, which will help the alarm to wake up
the child.
When you hear the alarm every night, remind your child to stop urinating
and going to the toilet. Before going to bed at night, it is not necessary to
limit children's liquid intake.
Importance
Plan
Maintenance/cleaning
The warranty period of the wearable alarm you purchased is 30 days
for defects in materials and processes of the manufacturer, and the
warranty period does not include damages caused by misuse or
overuse. The functional shelf life is 6 months.
In case of man-made damage, our company will charge for repair
or replacement of components within the warranty period according
to its discretion, and the components must be returned at the
expense of customers. If the components are not purchased directly
from our company, the customer shall provide proof of purchase,
such as sales invoice receipt or invalid cheque.
Receiver
Charging
box
Transmitter
(Detecting urine)
Receiver: The receiver is used to receive the alarm information from the
transmitter and notify thevibration or sound. It has the function of
temperature and humidity detection and is used to detect thecurrent
ambient temperature and humidity.
Charging box (storage box): used for charging transmitter and receiver.
When not charging, it isconvenient for users to store and carry after
being covered.
Switch on / off
Alarm mode Batter y level
Temperature
display
Temperature
display
Temperature and humidity sensor
Left
button
Right
button
Vibration plus sound mode setting:
Press the left button three times, the number 000003 will be displayed
on the screen, and a small icon will appear.
Press the right button to confirm, and the system will automatically
return to the main interface, and the setting will be finished.
( In case of use )
( In case of use )
( In case of use )
Sound mode setting:
Press the left button twice, the number 000002 will be displayed on the
screen, and a small icon will appear.
Press the right button to confirm, and the system will automatically
return to the main interface, and thesetting will be finished
( In case of use )
( In case of use )
Importance
Importance
Parents' participation is also essential for the success of this program.
In the first few weeks, children need parents' help and encouragement.
This plan may be slow and frustrating, but parents insist on using the
alarm every night, and the alarm can sound normally during every
training course, so parents should help to wake up their children.
You need to continue using the alarm for 3 to 4 weeks, and make sure
that your child will not relapse after the last alarm. Recurrence refers to
a child's continuous wet urine after one or more months. If this happens,
please start using the alarm again immediately, so that the recurrence
interval will become longer and longer.
In the first few weeks, when the alarm sounds, the child may not be
woken up by the alarm, so the child needs the help of parents: wake up
the child and let him go to the toilet.
The process of children's participation is indispensable for their success.
Don't unplug the alarm for your child. It's better you’re your child to notice
that the alarm sounds and remove or disconnect the alarm by himself.
Parents need to help the child to go to the bath room to discharge urine.
In the first one to two weeks, children maybe completely wet in bed, but
parents still need to continue to emphasize the importance of going to
the toilet and encourage them. Ask the children if they remember the
alarm and what they did the next day.
After the alarm sounds, reconnect the alarm to the child and put on a new
pair of underwear. Use an all-night light in the child's room, which will help
the child wake up more easily when the alarm sounds and find the way to
the bathroom.
Be sure to praise your children every time they spend a dry night or notice
the alarm. It is also important not to scold children because they don't
notice the alarm sound, because it takes some time to change their
behavior. In addition, it is helpful to use the progress chart so that children
can participate in the progress of the plan.
Remember to clean the sensor clip after every wet part. If necessary, clean
the alarm once and for all. Do not immerse the alarm body in water,
because it will damage the internal parts, and the sensor clip can be washed
in water.
Always check the battery to ensure that the alarm is still working. This can
be checked by inserting a damp cloth in the middle of the clip. When the
alarm is not used for a long time, please take out the battery.
The alarm of our company is designed for a single user. If you want another
child to use the alarm, please contact to buy another alarm
Guarantee
Warning: After use, please open the transmitter clip and wipe
it with dry paper towel before use
尿液报警器使用说明
感谢您购买我们的产品
使用前请务必仔细阅读此说明书并妥善保管，以备将来参考。
产品组成
充电盒（收纳盒）
充电盒盖
接收器
发射器（检测尿液）
尿液报警器由三个部分构成：
发射器（尿液检测）：检测尿液通过无线方式发送报警信息给接收器
接收器：接收器用于接收发射器报警信息，通过震动或者声音方式通知
用户，带有温湿度检测功能，用于当前环境温度湿度检测。
充电盒（收纳盒）：用于发射器，接收器的充电。不充电时盖上盖子后
方便用户收纳，携带。
开关机
将开关拨到右边接收器开机，拨到左边接收器关机，发射器默认一直开机。
报警模式 电池电量
湿度显示温度显示
湿温度
传感器
左键 右键
开关键
接收器报警模式设置
震动模式设置：
按一下左边按钮，屏幕显示数字000001,出现 小图标，按右键确认，
系统自动返回主界面，设置结束
声音模式设置：
按两下左边按钮，屏幕显示数字000002出现 小图标，按右键确认，
系统自动返回主界面，设置结束
震动加声音模式设置：
按三下左边按钮，屏幕显示数字000003出现 小图标，按右键
确认，系统自动返回主界面，设置结束
温度显示模式设置
( 使用情况下 )
摄氏度显示：
按五下左边按钮，屏幕显示数字000005温度单位出现 摄氏
度小图标，按右键确认，系统自动返回主界面，设置结束
华氏度显示：
按四下左边按钮，屏幕显示数字000004温度单位出现华氏度
小图标，按右键确认，系统自动返回主界面，设置结束
尿液检测模块使用
将尿液检测模块扣子撑开，沿着内裤边沿将检测模块扣在内裤上。
报警提示
( 使用情况下 )
( 使用情况下 )
( 使用情况下 )
( 使用情况下 )
当系统出现报警时候，出现 小图标，报警器按用户设定的报警模式
震动或者声音或者震动+声音，用户按任意键报警取消，报警图标消失，
报警器恢复正常。
产品充电
将接收器，发射器放入充电盒，插入USB充电,直到接收器电池满格充电
结束当发射器指示灯由红色边绿色时充电结束。
注意事项
1. 使用接收器温湿度功能时接收器不得接触或放置于如口袋等特殊环
境，不得将温湿度传感器孔位遮挡，接收器在充电过程中温湿度功
能无效。
2. 产品充电采用标准DC5V供电
3. 充电完成后，产品不使用时可将接收器关机以节省电能消耗。
产品介绍
在孩子入睡大约1至2个小时，家长想要完全弄醒孩子，至少需要
1个星期。而报警器将会帮助防止睡的太熟的孩子不会被叫醒。
通过白天让孩子小睡一会，确保孩子在晚上睡觉不会筋疲力尽，
这样将会有助于报警器将孩子叫醒。
每天晚上要提醒你的孩子，当听到报警声音时，须停止排尿并上
厕所。
在晚上上床睡觉前，没必要限制液体的摄入量。
在最初的几周里，当报警器响起时孩子自己可能不会被报警器叫
醒，所以孩子需要家长的帮助：叫醒孩子并上厕所。
孩子参与的过程是孩子取得成功不可缺少的。不要为孩子拔下报
警器，让孩子自己察觉报警器响起并自己取下或断开报警器为更好，
家长需要帮助孩子上卫生间排完尿。在最初的一到两周里，孩子可能
会在床上完全尿湿但家长仍需要继续强调上厕所的重要性并且鼓励他
们。问问孩子第二天是否记得报警器响起和他们做了些什么。
重要
重要
家长的参与对于这个计划的成功也是必不可少的，在最初的几周
内，孩子需要家长的帮助和鼓励。这个计划可能是缓慢和沮丧的，但
家长坚持每天晚上使用报警器，每次训练过程报警器都能正常响起，
家长要帮助叫醒孩子。
你需要继续使用报警器3至4周，亦确保孩子在最后一次报警后不
会复发。复发是指孩子在一个月或更多月之后又连续尿湿。如果这种
情况发生，请立刻开始再次使用报警器，这样复发的间隔将会变得越
来越长。
在报警器发生响声后，要给孩子重新连接报警器，同时要给孩子
换上一条新的内裤。 在孩子的房间使用一个通宵灯，这样有助孩
子在报警器响起时更容易醒来，并且能够找到去卫生间的路。
每次你的孩子度过一个干燥的夜晚或察觉到报警声，一定要表扬
他们。同样重要的是不要因为孩子没有察觉到报警音而责骂他们，因
为改变孩子的行为要花费一些时间。此外，使用进度图是很有帮助的，
以便孩子能参与到计划的进展中。
重要
计划
在每次有尿湿部分后，记住要清理传感器夹子。如果有需要的话，
可一 并擦干净报警器。不要把报警器本体浸在水里，因为这样会损坏
内部零件，传感器夹子可在水里冲洗。
一定要经常检查电池，以确保报警器仍在工作。这可以通过在夹
子中间插入一块湿布来检查。当很长时间不使用报警器时，请取出电
池。
本公司报警器是为单个用户设计的，如果你想另一个孩子使用报
警器，请联系购买另外一个报警器。
保养/清洁
您购买的可穿式报警器对于制造商在材料和工艺上的缺陷保质期
为30天，保质不包括误用或过度使用而导致的损坏。功能保质期为6
个月。
人为损坏，本公司将依据自由决定权在保质期内收费进行修理或
跟换元件，元件须由客户付费返回。如果元件不是直接从本公司购买
的，客户需提供购买证明，如销售的发票收据或作废的支票。
保证书
警告：使用中报警后，请将发射端夹子打开并用干爽的纸巾擦
干净，方可使用。
Bed Wetting Alarm