User Manual

• RF Manual of remote control

Model:YK01

Battery:3V CR2032

Wireless Frequency:433.92MHz

Battery replacement of remote control

1. Remove the battery compartment in the direction shown in the figure

2. Facing the "+" and "-" pole marks of the battery compartment, put the CR2032 button battery

into the battery compartment

3. Insert the battery compartment in the correct direction

Note: Please pull out the insulating sheet of the battery compartment before using

the remote control for the first time

Use of remote control

1. When using the remote control, please pair it with the electric appliance to be controlled

2. Press the remote control briefly, the indicator light will be on once, and remote control signal

will be sent

3. Long press the remote control, the indicator light continues to light, and continues to send out

remote control signal

4. The remote control storage box can be pasted on the vertical wall to store the remote control

when it is not in use

Battery handling and usage:

WARNING: Keep batteries away from children and pets.

Follow the battery manufacturer’s safety and usage instructions.

Insert the battery observing the proper polarity(+/-) as indicated inside the Battery Compartment.

CAUTION: Failure to properly align the battery polarity can cause personal injury and/or property

damage.

Remove spent or discharged battery from the product.Remove the battery when not using the

product for an extended period.

PAGE 1
RF Manual of remote control • Model:YK01 Battery:3V CR2032 Wireless Frequency:433.92MHz Battery replacement of remote control 1. Remove the battery compartment in the direction shown in the figure 2. Facing the "+" and "-" pole marks of the battery compartment, put the CR2032 button battery into the battery compartment 3.
PAGE 2
Never throw batteries into a fire.Do not expose batteries to fire or other heat sources. Dispose or recycle spent/discharged batteries in compliance with all applicable laws.For detailed informationcontact your local solid waste authority. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules.
PAGE 3
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help.