VTA-200B
Important Safety Instructions ......................................................................................................................... 3 Product Overview .......................................................................................................................................... 4 Setup / Basic Operation................................................................................................................................. 7 Listening to a Vinyl Record .................
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT: RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR. -‐ This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-‐insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
15. -This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. -Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
1. POWER Push to turn the unit ON or OFF. 2. “PHONO, CD, AUX, FM/ ” SELECTION KNOB Rotate to select your desired function. “FM”, “ ” SLIDE SWITCH Slide to select either FM or Bluetooth. 3.5mm AUX IN JACK Connects your external source to the AUX IN jack. PLAY INDICATOR Illuminates when CD is playing. ST/BT INDICATOR Blue light flashes when the unit is waiting for pairing. Blue light stays lit when the external device is connected to the unit.
Rear View 24. FM wire antenna While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception. 25. LINE OUT jacks For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack. 26. AC Power Cord Connect the AC plugs into a wall outlet.
Setup / Basic Operation Setup 1. Remove white protective needle cover by gently pulling towards front of unit. 2. Remove any packaging materials from the unit. 3. Connect the AC power cord to a wall outlet. Note: -It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label. -To prevent interference, avoid bundling audio signal cables together with the AC power cord. Basic Operation 1. Push the POWER button to turn the unit on. 2.
7. The turntable will begin to turn. When the record reaches its end, tone arm will stop at the center of the record and you must lift and return the tone arm to the tone arm rest manually. Lock the tone arm-rest holder to protect the tone arm. Important: - Closing the top cover will help prevent dust from settling on the turntable. - Always relock the tone arm clip before transporting the unit. - Do not place anything on top of the turntable cover, especially while playing a record. Listening to a CD 1.
2. While the CD is stopped, press the PROGRAM button. 3. “PROGRAM” indicator lights up and “01” blinks on the display. 4. Press ( or ) to select a track number. 5. Press the PROGRAM button again to set the next program track, “02” appears and blinks.. Repeat steps 4 thru 5 to program the additional tracks. 6. When the selection of track numbers has been finished, press the PLAY button ( ) to start program playback.
Listening to an External Audio Device (Bluetooth Mode) In BT (Bluetooth) mode, this unit can play music from external devices which have a built-in Bluetooth feature. GETTING CONNECTED USING BLUETOOTH 1. Select “FM/ ” mode. 2. Slide the slide switch on “ ” and the ST/BT indicator will flash blue. 3. Turn ON the Bluetooth function on your external device. NOTE: The effective distance between your external device and this apparatus is 10 meters (33ft). 4.
Handling Vinyl Records • Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. Touching the record surface will cause your record’s quality to deteriorate. • To clean a record, use a soft anti-static cloth to gently wipe the record surface. • Keep records in their protective sleeves when not in use. • Always store records upright on their edges • Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.
Specifications GENERAL Power Requirements Power Consumption Dimensions (W x H x D) Weight AC 120 V~ 60 Hz 30W 460 x 255 x 340mm | 18 x 10 x 13.4in (approx.) 7 kg. | 16 lbs (approx.) AMPLIFIER Output Power Frequency Response 5W+5W 60 to 20,000 Hz SPEAKER SYSTEM Type Impedance Output Power 2-way 8 ohms Max.
Troubleshooting Guide Symptom Possible Cause Solution • Unit will not power on. • Unit • Connect sound output from speakers. • The • The TAPE GENERAL • No • Noise/Distortion in sound output. FM RADIO CD PLAYER cassette tape is not inserted properly. • The tape has reached the end. • The station is not tuned-in properly. • A TV set is being used nearby and is interfering with the radio reception. • The antenna is not oriented properly. • Properly CD is inserted upside down.
Bluetooth • No sound • Sound has a lot of static • Unable to pair with a Bluetooth device • The unit is not switched to Bluetooth mode • Your device’s and/or the unit’s volume is not turn up. • Your device is too far from the unit or there’re some obstacle between your device and the unit • Your device is too far away • Your device doesn’t have Bluetooth connectivity. • The Bluetooth pairing is not successful • Ensure the unit is switched to BT mode.
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Victrola is a registered trademark of Innovative Technology Electronics Corp. Innovative Technology Electronics Corp. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable.
