DVR065(GB) 2006.1.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` i mac001 1200DPI 90LPI Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` ii mac001 1200DPI 90LPI Important Safeguards This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` iii mac001 1200DPI 90LPI Important Safeguards 5 Do not use this product near water. For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water. 6 13 Unplug this product during lightning storms or 14 Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners. 7 Do not block any ventilation openings.
DVR065(GB) 2006.1.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 2 mac001 1200DPI 90LPI Overview DVD, DVD+R, DVD+RW? What is a DVD? DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 3 mac001 1200DPI 90LPI Overview INTRODUCTION Regional code 1 ALL If the region number on your DVD disc does not correspond to the region number of this player, the disc cannot be played.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 4 mac001 1200DPI 90LPI Overview About DVD Recording Notes on Recording • The recording times shown are not exact because the DVD Recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 5 mac001 1200DPI 90LPI Overview To clean the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. To obtain a clear picture The DVD Recorder is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 6 mac001 1200DPI 90LPI Identification of Controls Front Panel % ^& * ( ) ! @ # $ 1 ! POWER (STANDBY/ON) Turns the DVD Recorder on and off. @ Disc Tray (DVD deck) Insert a disc here. # Front Panel Display Shows the current status of the DVD Recorder. $ CH+/– Scans up or down through memorized channels. Also moves up and down in DVD navigation menus. % OPEN/CLOSE Opens or closes the disc tray. ^ REC Starts recording. Press repeatedly to set the recording time.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 7 mac001 1200DPI 90LPI Identification of Controls INTRODUCTION Front Panel Display Channel TV Channel C123 CATV Channel AW-1 AV1 input AW-2 AV2 input DW DV input CH23 Input mode Recording on disc 11:15 Indicates a DVD Timer recording is set. 11:15 Indicates a DVD Timer Recording is in standby mode. 11:15 Indicates the DVD is recording. 0:30 OTR Recording mode RECP Recording Pause mode Others SAFE Indicates when the DVD Recorder is locked.
DVR065(GB) 2006.1.17 10:25 AM ˘ ` 8 mac001 1200DPI 90LPI Identification of Controls Remote Control Turns the DVD Recorder on and off. Opens and closes the disc tray in DVD mode. Switches between the DVD Recorder tuner and your TV tuner. Displays a disc’s Title menu, if available. Switches the DVD Recorder input to TV tuner, Line 1, Line 2, or DV. - Selects numbered options in menus. - Selects TV channels. - Manually adjust tracking. Displays the edit menu for DVD+RW/+R discs or sets a chapter marker.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 9 mac001 1200DPI 90LPI Identification of Controls INTRODUCTION Skips to the next or previous chapter/track. Selects a subtitle language, if available. Selects an audio language (DVD), audio channel (CD) or audio type (TV). Increases or decreases the slow motion speed when playing a DVD. Displays the finalize menu for DVD+R discs. Enlarges the DVD video image. Displays the digest menu for DVD+RW/+R discs. Selects a DVD camera angle, if available.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 10 mac001 1200DPI 90LPI Identification of Controls Rear panel ! @ # $ % ^ & ! RF OUT (TO TV) Connect to a TV with an RF coaxial input. @ RF IN (FROM ANT.) Connect to your antenna or cable TV outlet. # AV OUT (VIDEO, L-AUDIO-R) Connect to a TV with video and audio inputs. $ LINE2 (VIDEO, L-AUDIO-R) Connect to the audio/video outputs of an external source (VCR, Camcorder, etc.). % AUDIO OUT (L-AUDIO-R) Connect to other equipment with audio inputs.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 11 mac001 1200DPI 90LPI Connections INTRODUCTION • There are a variety of ways to connect the DVD Recorder to your TV and other equipment. Use only one of the connections described below. Whichever TV connection you use will work with all input sources. • Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best connections.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 12 mac001 1200DPI 90LPI Connections Connecting a TV Choose one of the following TV connections, depending on the capabilities of your equipment. All video signals are available from all video outputs. That means that whichever TV connection you use, it will work with all input sources, including VHS out of the Component/Progressive Video Output.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 13 mac001 1200DPI 90LPI Connections Connecting an Amplifier/Receiver Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A). 1 Connect the DVD Recorder’s DIGITAL AUDIO OUT jack (COAXIAL X) to the corresponding in jack on your amplifier.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 14 mac001 1200DPI 90LPI Connections Connecting Optional Equipment To receive audio/video signals from other equipment, connect the LINE1 or LINE2 jacks on the DVD Recorder to the audio/video out jacks on your external component, using optional audio/video cables.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 15 mac001 1200DPI 90LPI Initial Installation Initial Installation After successfully connecting your DVD Recorder to your TV and other devices, this chapter will show you how to complete the initial installation. You must follow the initial installation process to set the time, date, channels, and language preferences for the DVD Recorder. A ‘Initial Setup Wizard‘ is displayed on the screen. Make sure the RF cable from your antenna or cable TV jack is connected.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 16 mac001 1200DPI 90LPI Initial Installation 7 The DVD Recorder detects channels automatically and stores them in memory. Auto Scan 7/8 TV 20/69 Back Cancel Setup - Exit 8 9 After finishing Auto Channel Search, set the clock. Use [œ/√] to move left/right and use […/†] to change the settings. Clock Setting … 2005 / 1 / 1 † 8/8 12 : 00 AM Back 10 16 After setting the clock, press [ENTER] to confirm.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 17 mac001 1200DPI 90LPI Initial Setup Setup Menu Overview The DVD Recorder Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Edit and Timer Recording. Press [SETUP], [œ/√] and [ENTER] on the remote control to view the first and second levels of the Setup menu. 1. Initial Setup Screen 2. Disc Operation Screen go to page 17~27. go to page 43~45.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 18 mac001 1200DPI 90LPI Initial Setup Auto Channel Search The DVD Recorder has a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation: Connect the DVD Recorder to the desired type of antenna or cable TV system, as shown in ‘Connecting Antenna/Cable‘ on page 11.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 19 mac001 1200DPI 90LPI Initial Setup Set Clock 1 Follow steps 1-2 as shown under Tuning Band. 2 Use […/†] to select ‘Set Clock‘. 3 Press [ENTER]. The Set Clock menu appears. 4 Enter the date and time. œ /√ (left/right): Moves the cursor to the previous or next column. - - Installation Page - TV/CATV Auto Scan CH Add/Del Modulator Out •Clock Setting … œ√† Choose …/† (up/down): Changes the setting at the current cursor position.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 20 mac001 1200DPI 90LPI Initial Setup RECORDING OPTIONS Settings DVD Record Quality You can set the default DVD recording quality to: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) or SEP (Very Low Quality - 8 hrs/disc). 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 21 mac001 1200DPI 90LPI Initial Setup LANGUAGE Settings OSD Language Select a language for the DVD Recorder Setup menu and on-screen displays. 1 - - Languages Page - •OSD Lang Menu Lang Subtitle Lang Audio Lang Press [SETUP]. The Setup menu appears. • English Français Espanol While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. Use [œ] and [√] to select ‘Languages Page ‘.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 22 mac001 1200DPI 90LPI Initial Setup PREFERENCE / Video Settings 1 Press [SETUP]. The Setup menu appears. - - Preference Page - - While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 4 Use [œ/√] to select ‘Preference Page While ‘Preference Page ‘. ‘ is selected, press [†] to select ‘Video‘.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 23 mac001 1200DPI 90LPI Initial Setup PREFERENCE / Audio Settings Follow the same procedure as Video Settings to select Audio Settings. - - Preference Page - Video Audio Parental Ctrl Auto Clock AutoPlay YourDVD … œ√† • Digital Output Dynamic V SURR Choose ENTER OK Bitstream Off Off SETUP Exit Digital Output 1 Use […/†] to select ‘Digital Output‘ while the Audio submenu is displayed. Press [√] to go to the second level.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 24 mac001 1200DPI 90LPI Initial Setup PREFERENCE / Parental Controls Set Parental Level The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. You can set the parental level from 1 to 8. 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 Use [œ/√] to select ‘Preference Page ‘.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 25 mac001 1200DPI 90LPI Initial Setup Change Password 1 While ‘Preference Page ‘ is selected, press [†] to select ‘Parental Ctrl‘. - - Preference Page - Video Audio Parental Ctrl Auto Clock AutoPlay YourDVD … œ√† 2 Parental • Password Choose ENTER Change OK SETUP Exit Select ‘Password‘ then press [√] to select ‘Change‘. - - Preference Page - Video Audio Parental Ctrl Auto Clock AutoPlay YourDVD Choose 3 Press [ENTER].
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 26 mac001 1200DPI 90LPI Initial Setup Various PREFERENCE Settings Auto Clock Auto Clock enables the DVD Recorder to set the clock automatically whenever it is in Standby mode (plugged in but powered off). 1 2 3 4 Use […/†] to select ‘Auto Clock‘. Press [√] to go to the second level. Use […/†] to set the Auto Clock Status to On or Off.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 27 mac001 1200DPI 90LPI Initial Setup System Information System Information helps service personnel identify key firmware information about your DVD Recorder in case service is required. - - System Info Page - Version Main Build Micom Software Loader Version … œ√† Choose 0000BBBBTT VER0049.04 1.0.1 AA0600 A100 ENTER OK SETUP Exit SETUP Exit Restore Defaults If you wish, you can reset the DVD Recorder to its original factory settings.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 28 mac001 1200DPI 90LPI On-Screen Display Overview The On-Screen Display provides feedback on the status of the DVD Recorder and/or the currently loaded disc. To access the On-Screen Display (or OSD), press the [DISPLAY] button. Displaying DVD Information 1 2 During disc playback, press [DISPLAY] to show information about the current disc. While the disc information is displayed, press [DISPLAY] again to show the disc status window.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 29 mac001 1200DPI 90LPI On-Screen Display Overview • Displaying icons on CDDA disc 01/16 0:00:41 Track : Shows the current track number and total number of tracks, and skips to the desired track number. Time Elapsed : Shows the elapsed playing time, and skips to the desired time.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 30 mac001 1200DPI 90LPI On-Screen Display Overview Displaying TV Information While watching TV, press [DISPLAY] to display/remove the on-screen display. If no rewritable DVD disc is inserted, you would see a screen like the following: If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the first button press. If you press [DISPLAY] again then the TV information is displayed.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 31 mac001 1200DPI 90LPI DVD Playback Before You Begin 1 2 Press the [DVD] button to set the remote control to operate the DVD deck. Turn the TV on and select the video input source connected to the DVD Recorder. DVD Selected Audio system: Turn the audio system on and select the input source connected to the DVD Recorder. Actions are now for DVD ■ Stop Playing a DVD 1 Press [EJECT] to open the disc tray.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 32 mac001 1200DPI 90LPI DVD Playback Still Picture and Frame-by-Frame Playback 1 Press [PLAY/PAUSE] during playback. The DVD Recorder will go into Pause mode. 2 You can back up or advance the picture frame-by-frame by pressing [FF (√√)] repeatedly during Pause mode. Fast Forward/Backward 1 Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder will go into Search mode.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 33 mac001 1200DPI 90LPI DVD Playback Repeat 1 To repeat the currently playing chapter, press [REPEAT]. REPEAT CHAPTER appears on the TV screen. 2 To repeat the currently playing title, press [REPEAT] a second time. REPEAT TITLE appears on the TV screen. 3 4 To repeat the whole disc, press [REPEAT] a third time. REPEAT DISC appears on the TV screen. You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 34 mac001 1200DPI 90LPI DVD Playback Disc Menus Many DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press [MENU]. Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight your desired selection and press [ENTER]. 1 2 Press [MENU]. The Disc menu is displayed. To exit the Disc menu, press [STOP] or [TV VIEW]. Title Menus 1 Press [TITLE].
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 35 mac001 1200DPI 90LPI Other Disc Playback Audio CD/MP3 PLAYBACK The DVD Recorder can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs. 1 Insert the CD disc and close the tray. The Audio CD or MP3 CD menu appears on the TV screen after a few moments to load the disc. 2 Use […†] to select a track or a file, then press [PLAY] or [ENTER]. ••• MP3 ••• During playback, the current track's elapsed playing time will appear on the menu.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 36 mac001 1200DPI 90LPI Other Disc Playback 5 6 7 Press [NEXT] or [PREV] to manually skip to the next or previous image. Press [√] (or [œ]) to rotate the image (counter) clockwise. Press [STOP] to exit the slideshow. • When a CD contains both MP3 files and JPEG files, the default Play mode is JPEG image files. • The DVD Recorder can playback up to 1000 files per disc. • MP3 files encoded below 64kbps are not supported.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 37 mac001 1200DPI 90LPI Basic Recording Recording from TV Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder and load a recordable disc . Make sure your TV input is set to view the DVD Recorder. 2 Set the desired Recording mode in DVD Record Quality menu by pressing [SETUP] button.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 38 mac001 1200DPI 90LPI Basic Recording One Touch Record (OTR) One Touch Recording allows you add recording time in fixed increments at the touch of a button. 1 Follow steps 1-4 under Recording from TV. 2 Press [REC (●)] repeatedly to set the length of the recording. Recording starts after the first press. Each subsequent press increases the recording time by 30 minutes within the available space. The recording time is displayed on the front panel display.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 39 mac001 1200DPI 90LPI Timer Recording The Timer Recording function allows you to record up to 8 programs within a period of one month. 1 Insert recordable media such as DVD±R ,DVD±RW. 2 Press [TIMER]. or Press [SETUP] and select ‘Timer REC’. Then press [ENTER]. DVD Recorder Init Setup ➞ Timer REC œ √ Select Init Setup The ‘Timer Recording’ menu appears. Use […†] to move to a timer recording slot, and press [ENTER] to modify it.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 40 mac001 1200DPI 90LPI Timer Recording • The Timer indicator lights on the front panel display when the DVD Recorder is ready for the Timer Recording. • The disc timer indicator is blinking if disc timer recordings are overlapped. • The DVD Recorder will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use the [AUDIO] button to set the audio before switching the DVD Recorder to Standby mode.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 41 mac001 1200DPI 90LPI Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder’s external inputs. 1 Make sure the component you want to record from is connected properly to the DVD Recorder; see pages 11 and 14. 2 Use [ … †] to select the external input to record from.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 42 mac001 1200DPI 90LPI Recording from an External Input Recording from a Digital Camcoder You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD Recorder. You can use the DVD Recorder remote to control both the camcorder and the DVD Recorder. Before recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14. The source signal must be DVC SD format.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 43 mac001 1200DPI 90LPI Disc Operation Disc Initialize • If you load a blank DVD±R (±RW) disc, it will be initialized (formatted to enable recording). • Do not start recording until disc initialization is complete. • If you load a DVD±RW that has already been used you can record a program immediately. Disc Operation in DVD±RW disc For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 44 mac001 1200DPI 90LPI Disc Operation Make Compatible (DVD±RW) 'Make Compatible' for a DVD±RW will automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing [MENU] or [TITLE]. 3 4 5 Press […/†] to select ‘Make Compatible‘. If you want to make the disc compatible, press [ENTER]. Erase Finalize Protect Make Comp Adapt Disc Info _ Disc Operation Select OK Exit …† ENTER DISC Exit To confirm, select ‘OK‘.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 45 mac001 1200DPI 90LPI Disc Operation Disc Operation in DVD±R, DVD-RW disc For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu. The DVD±R, DVD-RW Disc Menu allows you to rename your disc or finalize it so it will be compatible with most other DVD players. At first, go to Disc Operation mode. 1 2 Press [SETUP]. The Setup menu appears. While ‘Disc Oper‘ is selected, press [ENTER] to go to the Disc Operation page.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 46 mac001 1200DPI 90LPI Disc Edit Title Menu You can manage the titles on your DVD±R/±RW discs using the Title menu. At first, go to Disc Edit mode. 1 2 Press [SETUP]. The Setup menu appears. DVD Recorder Init Setup ➞ Disc Edit œ √ Select Init Setup Disc Oper Disc Edit Timer REC While ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Edit page.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 47 mac001 1200DPI 90LPI Disc Edit Divide (DVD±RW) This feature allows you to divide a title into two titles. 2 3 4 5 Select the title to be divided using [ENTER]. 6 7 Press [ENTER] when the preferred picture is on your TV screen. Edit TITLE CH 10 TITLE CH 10 10:20 am 12/21/04 10:34 am 12/21/04 SEP HQ Select ‘Divide’ using [… †] . Press [ENTER] to divide the title. Label Erase Divide Protect Chap Edit Index Pic _ Select 'Yes' and press [ENTER] to confirm.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 48 mac001 1200DPI 90LPI Disc Edit Edit Chapters 2 Select the title to be edited using [ENTER]. 3 Select ‘Chap Edit’ using [… †] . 4 Press [ENTER] to edit the chapters. 5 Select 'Yes' and press [ENTER] to confirm. Edit TITLE CH 10 TITLE CH 10 The Chapter Edit Menu will be displayed. Use [œ √…†] to select one of the various chapter marker functions (Add, Delete, or Hide). 7 Press [ENTER] to confirm.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 49 mac001 1200DPI 90LPI Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Symptom Cause Solution No power. The power cord is disconnected. No picture. The TV is not set to receive DVD Recorder signal output. Plug the power cord into the wall outlet securely. Select the appropriate video input on the TV so the picture from the DVD Recorder appears on the TV screen. Connect the video cable securely.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 50 mac001 1200DPI 90LPI Troubleshooting Symptom Cause Solution Camcorder image via A/V input to DVD Recorder is not shown on TV screen. Can’t play disc recorded on this DVD Recorder on another DVD player. DVD Recorder’s source is not set to LINE1/LINE2 composite. Use [TV VIEW] to select AV input channel (LINE1/LINE2 composite). The disc was not finalized (or not made compatible if using a DVD+RW). Some players will not play even a finalized disc.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 51 mac001 1200DPI 90LPI Troubleshooting Symptom All of the buttons don’t work or DVD screen stop suddenly. Cause Solution The batteries in the remote control are dead. The remote control is locked. Replace the batteries. The DVD Recorder is in the abnormal status. DVD Recorder has interrupted by itself. Press and hold [POWER] button on font over 5 seconds. Press and hold [DVD/VCR] button for 5 seconds to reset the DVD Recorder.
DVR065(GB) 2006.1.16 1:55 PM ˘ ` 52 mac001 1200DPI 90LPI Technical Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Signal system AC 100–240V~, 50/60 Hz Maximum 20W (Power-Off : 1.8W) 16.5*2.0*12.6 inches (420*50*319 mm)(w*h*d) Net : 7.21 lbs (3.27kg), Gross :9.19 lbs (4.
DVR065(GB) 2006.1.
