DF-Q74D2N-LS (GB)_ US A 05.1.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:3 AM 페이지i Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REM OVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:3 AM 페이지ii Important Safeguards This product has been tested and found to comply w ith the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference w hen the product is operated in a residential installation.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:3 AM 페이지iii Important Safeguards 5 Do not use this product near water. For example: near a bath tub, w ash bow l, kitchen sink, laundry tub, in a w et basement; or near a sw imming pool; and other areas located near w ater. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Unplug this product from the w all outlet before cleaning. Do not use liquid cleaners.
DF-Q74D2N-LS (GB)_ US A 05.1.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지2 Overview DVD, DVD+R, DVD+RW? What is a DVD? DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc w ith the latest digital video technology. DVD video uses modern M PEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc. How good is the resolution of DVD compared with VHS? The razor-sharp digital images have more than 500 lines of resolution at 720 pixels per line.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지3 Overview INTRODUCTION Which discs you can use The follow ing discs can be used in your DVD Recorder+VCR: Playback and recording DVD+RW (Digital Versatile Disc + ReW ritable) DVD+R (Digital Versatile Disc + W rite-Once) Playback only DVD Video (Digital Versatile Disc) DVD-R (DVD-Recordable): These discs can only be played back if the recording w as made in ‘Video mode‘ and the recording w as finalized.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지4 Overview • The displayed times for recording and time remaining may not alw ays add up to the exact length of the disc. • The available recording time may decrease if you heavily edit a disc. • W hen using a DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before you start a recording session, check the amount of recording time left on the disc.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지5 Overview INTRODUCTION Remote Control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: W ithin 23 ft (7 m) of the remote sensor. Angle: W ithin 30° in each direction of the remote sensor. Remote Control Battery Installation Detach the battery cover on the rear of the remote control, and insert tw o AAA batteries. M ake sure the polarities (+ and -) are aligned correctly. Caution Do not mix old and new batteries.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지6 Identification of Controls Front Panel ! @ ^ *) 2 & (1 ! STANDBY/ON Turns the DVD Recorder+VCR on and off. Lock/ Unlock the front panel and Remote control by pressing and holding it over 5 seconds. @ Cassette Compartment (VCR deck) Insert a video cassette here. # VCR EJECT Ejects the tape in the VCR deck. $ Disc Tray (DVD deck) Insert a disc here. % OPEN/CLOSE Opens or closes the disc tray. ^ REW DVD: Skips to previous chapter.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지7 Identification of Controls INTRODUCTION Front Panel Display Channel TV Channel C123 CATV Channel Au-1 AV1 input Au-2 AV2 input DV DV input USB USB input DVD to VCR copying COPY VCR to DVD copying CH23 Input mode Copy COPY Recording on disc 11:15 Indicates a DVD Timer recording is set. 11:15 Indicates a DVD Timer Recording is in standby mode. 11:15 Indicates the DVD is recording.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지8 Identification of Controls Remote Control Turns the DVD Recorder+VCR on and off. - Opens and closes the disc tray in DVD mode. - Ejects the tape in the VCR deck in VCR mode. Selects DVD mode. Selects VCR mode. Sw itches betw een the DVD Recorder+VCR tuner and your TV tuner. Sw itches the DVD Recorder+VCR input to TV tuner, Line 1, Line 2, or DV. - Selects numbered options in menus. - Selects TV channels. - M anually adjusts tracking.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지9 Identification of Controls Stops playback or recording. Displays the Timer Recording menu. Selects Recording mode: - DVD : HQ (1hr), SP (2hrs), EP (4hrs) or SLP (6hrs). - VCR : SP or SLP. Displays a disc’s Title menu, if available. Displays the edit menu for DVD+RW / +R discs or sets a chapter marker. Displays the disc operation for DVD+RW / +R discs. Displays the digest menu for DVD+RW / +R discs. Repeats the current chapter, track, title or the entire disc.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지10 Identification of Controls Rear panel ! @# $% ^ DVD & VCR OUT OUT AUDIO OUT COMPONENT OUT Pr R ANT. IN LINE 2 R AUDIO S-VIDEO OUT Pb L L COAXIAL DIGITAL AUDIO OUT Y RF OUT ( * ! AC Power Cord Plug into a pow er outlet. @ AUDIO OUT (L, R) Connect to a TV or other equipment w ith audio inputs. # COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV w ith Component Video (Y Pb Pr) inputs.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지11 Connections • Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input. • Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. • Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection system. Connecting Antenna/Cable 1 Disconnect the antenna/ cable from the rear of your TV.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지12 Connections Connecting a TV Choose one of the follow ing TV connections, depending on the capabilities of your equipment. All video signals are available from all video outputs. That means that whichever TV connection you use, it will work with all input sources, including VHS out of the Component/Progressive Video Output.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지13 Connections Connecting an Amplifier/Receiver Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A). 1 Connect the DVD Recorder+VCR’s DIGITAL AUDIO OUT jack (COAXIAL X) to the corresponding in jack on your amplifier.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지14 Connections Connecting Optional Equipment To receive audio/ video signals from other equipment, connect the LINE1 or LINE2 jacks on the DVD Recorder+VCR to the audio/ video out jacks on your external component, using optional audio/ video cables. OUT ANT.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지15 Initial Installation Initial Installation After successfully connecting your DVD Recorder+VCR to your TV and other devices, this chapter w ill show you how to complete the initial installation. You must follow the initial installation process to set the time, date, channels, and language preferences for the DVD Recorder+VCR. A ‘W elcome‘ message is displayed on the screen. M ake sure the RF cable from your antenna or cable TV jack is connected.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지16 Initial Installation 5 6 Select the desired disc playback subtitle language using […/ †]. Press [ENTER] to confirm. Select the desired signal type using […/ †]. Press [ENTER] to confirm.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지17 Initial Setup Setup Menu Overview The DVD Recorder+VCR Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Edit and Timer Recording. Press [SETUP], [œ/ √] and [ENTER] on the remote control to view the first and second levels of the Setup menu. 1. Initial Setup Screen 2. Disc Operation Screen go to page 17~27. go to page 47~49.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지18 Initial Setup Auto Channel Search The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation: Connect the DVD Recorder+VCR to the desired type of antenna or cable TV system, as show n in ‘Connecting Antenna/ Cable‘ on page 11.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지19 Initial Setup Set Clock 1 Follow steps 1-2 as show n under Tuning Band. 2 Use […/ †] to select ‘Set Clock‘. 3 Press [ENTER]. The Set Clock menu appears. 4 Enter the date and time. - - Installation Page - TV/ CATV Auto Scan CH Add/ Del M odulator Out • Clock Setting œ / √ (left/ right): M oves the cursor to the previous or next column. … œ√† Choose …/ † (up/ dow n): Changes the setting at the current cursor position.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지20 Initial Setup VCR Record Quality You can set the default VCR recording quality to SP (Standard Play) or SLP (Super Long Play). SP is higher quality, but SLP provides 3 times the recording time; e.g., a 2 hour tape w ill record for 6 hours in SLP mode. Follow the same procedure as the DVD Record Quality.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지21 Initial Setup PREFERENCE / Video Settings 1 Press [SETUP]. The Setup menu appears. - - Preference Page - - W hile ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 4 Use [œ/ √] to select ‘Preference Page W hile ‘Preference Page ‘. ‘ is selected, press [†] to select ‘Video‘. Video Audio Parental Ctrl Auto Clock VCR AutoPlay YourDVD … œ√† • TV Aspect Scan M ode Choose ENTER OK 4:3 PS Interlace SETUP Exit Press [√].
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지22 Initial Setup PREFERENCE / Audio Settings Follow the same procedure as Video Settings to select Audio Settings. - - Preference Page - Video Audio Parental Ctrl Auto Clock VCR AutoPlay YourDVD … œ√† • Digital Output Dynamic V SURR VCR Reception Tape Playback Choose ENTER OK Bitstream Off Off SAP Hi-Fi SETUP Exit Digital Output 1 Use […/ †] to select ‘Digital Output‘ w hile the Audio submenu is displayed. 2 3 4 5 Press [√] to go to the second level.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지23 Initial Setup VCR Reception Select your desired audio source for VCR recording (Stereo, Mono, or SAP). Follow the same procedure as ‘Digital Output‘ to set the VCR Reception option.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지24 Initial Setup PREFERENCE / Parental Controls Set Parental Level The Parental Controls feature allow s you to prevent DVDs from being played based on their ratings or to have certain discs played w ith alternative scenes. You can set the parental level from 1 to 8. 1 Press [SETUP]. The Setup menu appears. W hile ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 Use [œ/ √] to select ‘Preference Page W hile ‘Preference Page Ctrl‘.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지25 Initial Setup Change Password 1 W hile ‘Preference Page ‘ is selected, press [†] to select ‘Parental Ctrl‘. - - Preference Page - Video Audio Parental Ctrl Auto Clock VCR AutoPlay YourDVD … œ√† 2 Parental • Passw ord Choose ENTER Change OK SETUP Exit Select ‘Passw ord‘ then press [√] to select ‘Change‘. - - Preference Page - - … œ√† Choose 3 Press [ENTER]. The Input Passw ord submenu appears.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지26 Initial Setup Various PREFERENCE Settings Auto Clock Auto Clock enables the DVD Recorder+VCR to set the clock automatically w henever it is in Standby mode (plugged in but pow ered off). 1 2 3 4 Use […/ †] to select ‘Auto Clock‘. Press [√] to go to the second level. Use […/ †] to set the Auto Clock Status to On or Off.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지27 Initial Setup AutoPlay W ith Auto Play turn ON (the factory default setting), the VCR automatically starts playback w hen you insert a tape w ith its safety tab removed. 1 2 3 4 Use […/ †] to select ‘AutoPlay‘. Press [√] to go to the second level. Use […/ †] to set the AutoPlay Status to On or Off.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지28 On-Screen Display Overview The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/ or the currently loaded disc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button. Displaying DVD Information 1 2 During disc playback, press [DISPLAY] to show information about the current disc. W hile the disc information is displayed, press [DISPLAY] again to show the disc status w indow .
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지29 On-Screen Display Overview • Displaying icons on CDDA disc Track : Show s the current track number and total number of tracks, and skips to the desired track number. Time Elapsed : Show s the elapsed playing time, and skips to the desired time.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지30 On-Screen Display Overview Displaying TV Information W hile w atching TV, press [DISPLAY] to display/ remove the on-screen display. If no rew ritable DVD disc is inserted, you w ould see a screen like the follow ing: If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the first key press. If you press [DISPLAY] again then the TV information is displayed.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지31 DVD Playback Before You Begin 1 2 Press the [DVD] button to set the remote control to operate the DVD deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. DVD Selected Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. Actions are now for DVD ■ Stop Playing a DVD 1 Press [EJECT] to open the disc tray.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지32 DVD Playback Still Picture and Frame-by-Frame Playback 1 Press [PLAY/ PAUSE] during playback. The DVD Recorder+VCR w ill go into Pause mode. 2 You can back up or advance the picture frame-by-frame by pressing [FF (√√)] repeatedly during Pause mode. Fast Forward/Backward 1 Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder+VCR w ill go into Search mode.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지33 DVD Playback Repeat 1 To repeat the currently playing chapter, press [REPEAT]. REPEAT CHAPTER appears on the TV screen. 2 To repeat the currently playing title, press [REPEAT] a second time. REPEAT TITLE appears on the TV screen. 3 4 To repeat the w hole disc, press [REPEAT] a third time. REPEAT DISC appears on the TV screen. You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지34 DVD Playback Disc Menus M any DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press [M ENU]. Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight your desired selection and press [ENTER]. 1 2 Press [M ENU]. The Disc menu is displayed. To exit the Disc menu, press [STOP] or [TV VIEW ]. Title Menus 1 Press [TITLE].
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지35 VCR Playback Before You Begin 1 2 Press the [VCR] button to set the remote control to operate the VCR deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. VCR Selected Actions are now for VCR ■ Stop Playing a VHS Tape 1 Insert a prerecorded video cassette.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:4 AM 페이지36 VCR Playback Special Playback Features Notes on special playback features Horizontal lines (noise bars) will appear on the TV screen. This is normal. The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc. During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slight interference may be observed during this time.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지37 Other Disc Playback Audio CD/MP3 PLAYBACK The DVD Recorder+VCR can play audio CDs and M P3 files on CD-ROM , CD-R or CD-RW discs. 1 Insert the CD disc and close the tray. The Audio CD or M P3 CD menu appears on the TV screen after a few moments to load the disc. 2 Use […†] to select a track or a file, then press [PLAY] or [ENTER]. During playback, the current track's elapsed playing time w ill appear on the front panel display and menu.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지38 Other Disc Playback 3 Select the thumbnail you w ant to display using […†œ √] and press [ENTER]. 4 The full size image w ill be displayed and a slide show starts automatically w ith a time interval of 10 seconds. 5 Press [NEXT] or [PREV] to manually skip to the next or previous image. 6 7 Press [√] (or [œ]) to rotate the image (counter) clockw ise. Press [STOP] to exit the slideshow .
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지39 Basic Recording Recording from TV Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. M ake sure your TV input is set to view the DVD Recorder+VCR. 2 Set the desired Recording mode by pressing [REC MODE] repeatedly. DVD: HQ (High Quality - 1 hr/ disc), SP (Standard Quality - 2 hrs/ disc), EP (Average Quality - 4 hrs/ disc), or SLP (Low Quality - 6 hrs/ disc).
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지40 Basic Recording One Touch Record (OTR) One Touch Recording allow s you add recording time in fixed increments at the touch of a button. 1 Follow steps 1-4 under Recording from TV. 2 Press [REC (●)] repeatedly to set the length of the recording. Recording starts after the first press. Each subsequent press increases the recording time by 30 minutes (DVD, to a maximum of 6 hours) w ithin the available space or 30 minutes (VCR, to a maximum of 240 minutes).
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지41 Basic Recording One Touch Copy - DVD to VHS • If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. • Copy to VCR does not work in Progressive Scan Mode. 1 Insert a Disc. Insert the disc you w ish to copy in the DVD deck and close the disc tray. 2 Insert a VHS Tape. Insert a blank VHS videotape into the VCR deck. 3 Press [COPY] on the remote control.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지42 Basic Recording One Touch Copy - VHS to DVD You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [COPY] button. This allow s you to archive your old VHS tapes to DVD. If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not permitted to copy Macrovision encoded tapes. 1 Insert a VHS Tape. Insert the VHS videotape you w ish to copy into the VCR deck. 2 Insert a DVD+R or DVD+RW disc.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지43 Timer Recording The Timer Recording function allow s you to record up to 8 programs w ithin a period of one month. 1 Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape. 2 Press [TIMER]. or Press [SETUP] and select ‘Timer REC’. Then press [ENTER]. DVD Recorder Init Setup ➞ Timer REC œ √ Select Init Setup The ‘Timer Recording’ menu appears. Use […†] to move to a timer recording slot, and press [ENTER] to modify it.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지44 Timer Recording • The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the Timer Recording. • The tape timer indicator is blinking if any of the following meets if no recordable tape is inserted. Both the disc and tape timer indicators are blinking if tape and disc timer recordings are overlapped. • The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP).
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지45 Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs. 1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages 11 and 14. 2 Use [ … †] to select the external input to record from.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지46 Recording from an External Input Recording from a Digital Camcoder You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD Recorder+VCR. You can use the DVD Recorder+VCR remote to control both the camcorder and the DVD Recorder+VCR. Before recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14. The source signal must be DVC SD format.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지47 Disc Operation Disc Initialize • If you load a blank DVD+R (+RW ) disc, it w ill be initialized (formatted to enable recording). • Do not start recording until disc initialization is complete. • If you load a DVD+RW that has already been used you can record a program immediately. Disc Operation in DVD+RW disc For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc M enu.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지48 Disc Operation Make Compatible (DVD+RW) 'M ake Compatible' for a DVD+RW w ill automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing [M ENU] or [TITLE]. 3 4 5 Press […/ †] to select ‘M ake Compatible‘. If you w ant to make the disc compatible, press [ENTER]. Erase Finalize Protect M ake Comp Adapt Disc Info _ Disc Operation Exit To confirm, select ‘Yes‘. To cancel, select ‘No‘.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지49 Disc Operation Disc Operation in DVD+R disc For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc M enu. The DVD+R Disc M enu allow s you to rename your disc or finalize it so it w ill be compatible w ith most other DVD players. Finalize (DVD+R) Finalizing a DVD+R ‘locks’ its recordings in place so the disc can be played on most standard DVD players or computers equipped w ith DVDROM drives.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지50 Disc Edit Title Menu You can manage the titles on your DVD+R/ RW discs using the Title menu. At first, go to Disc Edit mode. 1 2 Press [SETUP]. The Setup menu appears. DVD Recorder Init Setup ➞ Disc Edit œ √ Select Init Setup W hile ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Edit page.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지51 Disc Edit Divide This feature allow s you to divide a title into tw o titles. 2 3 4 5 Select the title to be divided using [ENTER]. 6 7 Press [ENTER] w hen the preferred picture is on your TV screen. Edit TITLE CH 10 TITLE CH 10 10:20 am 12/ 21/ 04 10:34 am 12/ 21/ 04 SEP HQ Select ‘Divide’ using [… †] . Press [ENTER] to divide the title. Select 'Yes' and press [ENTER] to confirm.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지52 Disc Edit Edit Chapters 2 Select the title to be edited using [ENTER]. 3 Select ‘Chap Edit’ using [… †] . 4 Press [ENTER] to edit the chapters. 5 Select 'Yes' and press [ENTER] to confirm. Edit TITLE CH 10 TITLE CH 10 The Chapter Edit M enu w ill be displayed. Use [œ √…†] to select one of the various chapter marker functions (Add, Delete, or Hide). 7 Press [ENTER] to confirm.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지53 Troubleshooting Check the follow ing guide for the possible cause of a problem before contacting customer support. Symptom Cause Solution No pow er. The pow er cord is disconnected. No picture. The TV is not set to receive DVD Recorder+VCR signal output. Plug the pow er cord into the w all outlet securely. Select the appropriate video input on the TV so the picture from the DVD Recorder+VCR appears on the TV screen. Connect the video cable securely.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지54 Troubleshooting Symptom Cause Solution Camcorder image via A/ V input to DVD Recorder+VCR is not show n on TV screen. Can’t play disc recorded on this DVD Recorder+VCR on another DVD player. DVD Recorder+VCR’s source is not set to LINE1/ LINE2 composite. Use INPUT to select AV input channel (LINE1/ LINE2 composite). The disc w as not finalized (or not made compatible if using a DVD+RW ). Some players w ill not play even a finalized disc.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지55 Troubleshooting Symptom Cause Solution The batteries in the remote control are dead. The remote control is locked. Replace the batteries. The DVD Recorder+VCR is in the abnormal status. Press and hold POW ER key on font over 5 seconds. Press and hold [DVD/ VCR] key for 5 seconds to reset the DVD Recorder+VCR.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지56 Technical Specifications General Pow er requirements Pow er consumption Dimensions (approx.) M ass (approx.) Operating temperature Operating humidity Signal system AC 120V, 60 Hz M aximum:25W , Pow er-OFF:3.4W W ithout Leg : 16.9x3.3x12.3(430x85.5x314)(w x h x d) W ith Leg : 16.9x3.4x12.3(430x86.5x314)(w x h x d) Net : 11.02 lbs (5.00kg) Gross : 14.22 lbs (6.
DF-Q74D2N-LS (GB)_ US A 05.1.25 6:5 AM 페이지57 Technical Specifications Outputs VIDEO OUT S-VIDEO OUT (Y) COM PONENT VIDEO OUT (PROGRESSIVE SCAN) Audio output (digital audio) Audio output (analog audio) RF OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync, M ini DIN 4-pin x 1 (C) 0.286 V (p-p) 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1 (Pb)/ (Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 0.5 V (p-p), 75 Ω, RCA jack x 1 1.
DF-Q74D2N-LS (GB)_ US A 05.1.