CANTS MODEL : TAX-3Bb27 This device complies with Part 15 of FCC rules. Operation of this decide is subject to the following two conditions. (1) This device may not cause harmful interference. (2) This device must accept any interference that may cause undesired operation. NOTE © This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
REMOTE BUTTON PRESS ONCE SECOND Oarlock) / Disarm{Unlock) 2CH (Trunk release) SCH Permanent chirp delete Temporary shock delete Remote panic REMOTE CONTROL PROGRAMMING The following : stem will learn up to 3 separate remote control codes. To program remote controls, do the . Turn the ignition key ON position. . Press the valet switch for 3 second ~ LED will turn Turn the ignition key OFF position, 4. Press the valet switch 5 times. 3 The siren will chirp 5 tunes and the parking lights will flash 5 times.
DELECTABLE SILENT MODE Your security system has the ability to be armed and disarmed silently. To place the security system into silent mode, press #1 and #2 simultaneously on the remote control for two seconds. 1 light © silent mode 2 lights : normal operating mode PANIC FEATURE You may also trigger the system via the remote control by pressing #2 and # simultaneously for 2 seconds. The siren will sound for 30 seconds. Pressing #1 on the remote control will turn the panic feature off.
STARTER DISABLE The by disabling the ability to start the engine during an attempted break-in. purity system can be connected to a starter disable mechanism providing additional security FEATURE PROGRAMMING This mode allows vou to program how the system operates. To enter programming mode! 1. The system is disarm. 2. Turn the ignition key ON and then OFF. 3. Press the valet switch 10 times. 4, The siren will chirp 3 times and the parking lights will flash 3 times LED flashing. ted .