BLUETOOTH CLOCK RADIO SCR1989BT OPERATING INSTRUCTIONS Please read and follow this instruction manual carefully before using the unit and retain it for future reference SYLVANIA is a registered trademark of OSRAM
SAFETY INSTRUCTIONS WARNING: IF CONNECTED TO AN AC OUTLET: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THE IMPORTANT SAFETY INSTRUCTIONS SHALL INCLUDE, IF AND AS APPLICABLE TO THE APPLIANCE, STATEMENTS THAT CONVEY TO THE USER THE INFORMATION ITEMIZED IN THIS PARAGRAPH: 1. Read instructions - All the safety and operating instructions should be read before the appliance is operated 2.
COMPLIANCE WITH FCC REGULATIONS This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FUNCTIONS AND CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
AC OPERATION 1. Connect the AC Power Adaptor to a wall outlet with AC120V/60Hz power supply. Time Setting 1、In standby mode, press CLK/MEM button to enter into clock setting mode, again press CLK/MEM button for 2-3 seconds, time digital blinking, then press HR/MIN buttons to set the time, and press CLK/MEM button to confirm.
Auto power-off (Sleep mode) Under power-on mode, press SLEEP button, the LED will blinking display “90” (blinking lasts for 5 seconds). Repeatedly press the SLEEP button during the blinking period, then you can choose among 90→80→70→······→10→OFF for auto shutdown time. 5 seconds after setting the time, the setting will be confirmed automatically and auto power-off function will start up. If you want to power off the unit in the midway, then press POWER button directly.