Specifications

ManualsBrandsDomo Tactical Communications ManualsElectronicsIP Mesh radio with amplifier

Revision: 0.2

Resource ID 100289

D1707-OEM + AP001973 Integration

Document

Agile IP Mesh Radio

DTC – Solent

Fusion 2

1100 Parkway

Solent Business Park

Whiteley

Hampshire

PO15 7AB

United Kingdom

+44 (0)1489 566 750

Summary of content (9 pages)

PAGE 1
Revision: 0.
PAGE 2
D1707-OEM + AP001973 Integration Document Agile IP Mesh Radio Contents Contents .............................................................................................. 1 1. 2. 3. 4. Document History .................................................................................... 1 Introduction ............................................................................................. 2 FCC requirements.....................................................................................
PAGE 3
D1707-OEM + AP001973 Integration Document Agile IP Mesh Radio 1. Document History Revision Date 0.1 07 Feb 2020 0.2 07 Feb 2020 Revision: 0.
PAGE 4
D1707-OEM + AP001973 Integration Document Agile IP Mesh Radio 2. Introduction This document outlines the hardware integration for the D1707-OEM + AP001973 IP Mesh baseband transceiver module with dual receive diversity. This document applies to units with FCC ID:XRF-NETNODEP41W. Several modules can be used to generate a fluid self-forming, self-healing mesh containing up to sixteen nodes. The module within the mesh exchange data on a single frequency, simplifying frequency management.
PAGE 5
D1707-OEM + AP001973 Integration Document Agile IP Mesh Radio 3. FCC requirements This module complies with part 90 of Title 47 of the Code of Federal Regulations. The host manufacturer remains responsible for compliance with any other FCC rule parts that may apply.
PAGE 6
D1707-OEM + AP001973 Integration Document Agile IP Mesh Radio 4. Functional Specification RF Interfaces Antenna 1 Switched transmit & receive antenna Antenna 2 Receive only antenna Output power 1W Frequency Range 2354.0 to 2379.0 MHz Bandwidth 6.0 MHz Mesh capacity Up to 14.
PAGE 7
D1707-OEM + AP001973 Integration Document Agile IP Mesh Radio 5. Power and Ethernet connection Power and Ethernet is connected via the 8-way socket Power and Ethernet socket Pin Function 1 +12V 2 GND 3 Ethernet TX+ 4 Ethernet TX- 5 Ethernet RX+ 6 Ethernet RX- 7 GND 8 Shield Revision: 0.
PAGE 8
D1707-OEM + AP001973 Integration Document Agile IP Mesh Radio 6. Mechanical dimensions The module is: • 186 mm wide • 173 mm tall • 23 mm deep Revision: 0.
PAGE 9
D1707-OEM + AP001973 Integration Document Agile IP Mesh Radio 7. Antenna This module is designed to be used with the following external antennas: • Cobham OA4-2.2V/2046 omni antenna: 4 dBi gain • DTC ANT2SMA-200250; Omnidirectional 2.0 – 2.5 GHz; 2.0dBi gain Revision: 0.