RPD190-218--IO-AU.book Seite 1 Montag, 24.
RPD190-218--IO-AU.book Seite 2 Montag, 24.
RPD190-218--IO-AU.book Seite 3 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 Please read this instruction manual carefully before installation and first use, and store it in a safe place. If you pass on the product to another person, hand over this instruction manual along with it. Table of contents 1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RPD190-218--IO-AU.book Seite 4 Montag, 24. Oktober 2016 5:08 17 Explanation of symbols 1 D ! ! A I 4 RPD190, RPD218 Explanation of symbols DANGER! Safety instruction: Failure to observe this instruction will cause fatal or serious injury. WARNING! Safety instruction: Failure to observe this instruction can cause fatal or serious injury. CAUTION! Safety instruction: Failure to observe this instruction can lead to injury.
RPD190-218--IO-AU.book Seite 5 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 2 Safety instructions Safety instructions The manufacturer accepts no liability for damage in the following cases: • Faulty assembly or connection • Damage to the product resulting from mechanical influences and excess voltage • Alterations to the product without express permission from the manufacturer • Use for purposes other than those described in the operating manual 2.
RPD190-218--IO-AU.book Seite 6 Montag, 24. Oktober 2016 5:08 17 Safety instructions ! CAUTION! A NOTICE! RPD190, RPD218 • Danger of crushing! Do not put your fingers into the hinge. • Foodstuff may only be stored in its original packaging or in suitable containers. • Check that the voltage specification on the type plate is the same as that of the power supply. • Never pull the plug out of the socket by the connection cable.
RPD190-218--IO-AU.book Seite 7 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 Scope of delivery • If you connect the device to a battery, make sure that no food comes into contact with the battery acid. A NOTICE! • Do not use electrical devices inside the cooling device unless they are recommended by the manufacturer for that purpose. • Do not place it near naked flames or other heat sources (heaters, direct sunlight, gas ovens etc.
RPD190-218--IO-AU.book Seite 8 Montag, 24. Oktober 2016 5:08 17 Intended use 4 RPD190, RPD218 Intended use The RPD series refrigerators are suitable for refrigerating foodstuffs and storing frozen foodstuffs. The device is also suitable for use on boats. The device is designed to be operated from a 12 V or 24 V on-board supply socket of a vehicle, boat or caravan as well as from a 100 – 240 V mains.
RPD190-218--IO-AU.book Seite 9 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 5.2 Technical description Control elements inside the refrigerator The various types of refrigerators are shown in the following illustrations: RPD190 1 2 1 RPD218 1 2 MODE MODE 3 3 4 4 5 No.
RPD190-218--IO-AU.book Seite 10 Montag, 24. Oktober 2016 5:08 17 Technical description 5.3 RPD190, RPD218 Control elements 2 1 2 3 4 5 6 MODE No.
RPD190-218--IO-AU.book Seite 11 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 6 Installing and connecting the refrigerator Installing and connecting the refrigerator Please note the following instructions for installation on boats: D A 6.1 DANGER! If the device is powered by the mains, ensure that the power supply has a residual current circuit breaker. NOTICE! • The device can be tilted sideways up to 30°. When setting up the refrigerator, note that it must be fastened to take account of this.
RPD190-218--IO-AU.book Seite 12 Montag, 24. Oktober 2016 5:08 17 Installing and connecting the refrigerator 6.
RPD190-218--IO-AU.book Seite 13 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 Installing and connecting the refrigerator Key to fig. 3, page 12 No.
RPD190-218--IO-AU.book Seite 14 Montag, 24. Oktober 2016 5:08 17 Installing and connecting the refrigerator RPD190, RPD218 4 610 – 62 0m m m 580 m RPD190: 1422 – 1432 mm RPD218: 1580 – 1590 mm min. • The installation dimensions can be found in the figure above. • Keep objects clear of openings in the housing or installation structure (such as ventilation slots, etc.). • Condensate is produced when the refrigerator is operating normally.
RPD190-218--IO-AU.book Seite 15 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 Installing and connecting the refrigerator Proceed as follows to install the refrigerator: 5 1 2 ➤ Fit the drain hose to the drain spout at the rear of the cabinet (1). ➤ Drill a hole for the drain water hose (e.g. through the floor (2). ➤ Run the drain water hose through the hole. Make sure that the hose does not kink. ➤ Seal between the drilled hole and the drain water hose. ➤ Push the refrigerator into the recess.
RPD190-218--IO-AU.book Seite 16 Montag, 24. Oktober 2016 5:08 17 Installing and connecting the refrigerator RPD190, RPD218 6 2. 1. ➤ Fix the refrigerator in place using suitable screws (see figure above). 7 1 ➤ Fix the lower front vent as shown in the illustration.
RPD190-218--IO-AU.book Seite 17 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 6.3 Installing and connecting the refrigerator Connecting the refrigerator to the power supply Connecting the refrigerator to 12 – 24 V A NOTICE! • To avoid voltage drops and loss of performance, keep the connection cable as short as possible and uninterrupted. Therefore avoid additional switches, plugs or power strips.
RPD190-218--IO-AU.book Seite 18 Montag, 24. Oktober 2016 5:08 17 Installing and connecting the refrigerator RPD190, RPD218 Key to the figure Coordinate axis l ∅ A Meaning Unit Cable length m Cable cross section mm² NOTICE! Make sure the polarity is correct. ➤ Before starting up the device for the first time, check whether the operating voltage and the battery voltage match (see type plate). 0 1 ➤ Connect the cable to the refrigerator DC terminal block (1).
RPD190-218--IO-AU.book Seite 19 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 Using the refrigerator Connecting the refrigerator to AC mains D DANGER! Danger of fatal injury! • Never handle plugs and switches with wet hands or if you are standing on a wet surface. • If you are operating your refrigerator on a boat with an AC mains connection using a shore connection, you must install a residual current circuit breaker between the AC mains and the refrigerator. Seek advice from a trained technician.
RPD190-218--IO-AU.book Seite 20 Montag, 24. Oktober 2016 5:08 17 Using the refrigerator 7.2 RPD190, RPD218 Using the refrigerator The refrigerator conserves fresh foodstuffs. The freezer compartment conserves frozen foodstuff and freezes fresh foodstuff. ! A CAUTION! Health hazard! • Never put any items back in the freezer compartment which have started defrosting or have been defrosted; consume them as soon as possible.
RPD190-218--IO-AU.book Seite 21 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 Using the refrigerator Setting the temperature – Normal mode ➤ Press the button to set the temperature to one of five levels between “cool” and “very cold”. The number of LEDs that are lit indicate the temperature range with 1 LED showing the lowest cooling capacity and 5 LEDs showing the highest cooling capacity. Generally, a middle setting is the most suitable.
RPD190-218--IO-AU.book Seite 22 Montag, 24. Oktober 2016 5:08 17 Using the refrigerator RPD190, RPD218 Conserving foodstuffs You can conserve foodstuffs in the refrigerator. The time for which the food can be conserved in this way is usually stated on the package. A NOTICE! • Do not conserve warm foodstuffs in the refrigerator. • Do not place glass containers containing liquid in the freezer compartment. ➤ Observe the temperature information and the best before date on the food packaging.
RPD190-218--IO-AU.book Seite 23 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 7.3 Using the refrigerator Dividing the interior space You can divide the interior space of the refrigerator variably by arranging the shelves and the door compartments according to your needs. Removing and replacing the shelves a ➤ Insert a flat bladed screw driver into the slot of the shelf locks and turn it counter-clockwise. ➤ Remove the shelf locks from the wire shelf. ➤ Tilt the shelf to one side up.
RPD190-218--IO-AU.book Seite 24 Montag, 24. Oktober 2016 5:08 17 Using the refrigerator RPD190, RPD218 b 3. 2. 1. ➤ Insert the ends of the shelf on the left (1.). ➤ Slide the shelf into the holes on the right (2.). ➤ Slide the plastic plugs into the holes in the wall (3.).
RPD190-218--IO-AU.book Seite 25 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 Using the refrigerator c ➤ Snap the shelf locks onto the shelf. 7.
RPD190-218--IO-AU.book Seite 26 Montag, 24. Oktober 2016 5:08 17 Using the refrigerator I 7.5 RPD190, RPD218 NOTE A stop wire (1) is fitted to the rear of the lower shelf. The purpose is to prevent items from resting against the rear interior liner which has a low ambient control heater fitted behind the liner in this region. The stop wire must remain fitted to the rear of the lower shelf at all times.
RPD190-218--IO-AU.book Seite 27 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 7.6 I Using the refrigerator Defrosting the refrigerator NOTE In high ambient temperatures, the refrigerator may operate continuously, which can lead to excessive formation of frost on the rear wall of the refrigerator compartment. If this is the case, set the temperature control (fig. 2 6, page 10) to a lower level (“1” or “2”). Humidity can cause frost to form in the interior of the freezer compartment.
RPD190-218--IO-AU.book Seite 28 Montag, 24. Oktober 2016 5:08 17 Using the refrigerator RPD190, RPD218 ➤ Run the refrigerator for approx. three hours at level “5”. ➤ Place the goods for cooling in the refrigerator. ➤ Set the temperature control to the desired level. 7.7 Switching off and storing the refrigerator If you do not intend to use the refrigerator for a long time, proceed as follows: ➤ Set the P button to “OFF”. ➤ Disconnect the power supply to the device.
RPD190-218--IO-AU.book Seite 29 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 8 Cleaning and maintenance Cleaning and maintenance ! A WARNING! Always disconnect the refrigerator from the mains before you clean and service it. NOTICE! • Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the refrigerator. • Never use hard or sharp tools to remove ice or to free objects frozen onto the device.
RPD190-218--IO-AU.book Seite 30 Montag, 24. Oktober 2016 5:08 17 Disposal 10 ! A RPD190, RPD218 Disposal WARNING! Children beware! Before disposing of your old refrigerator: • Dismantle the drawers. • Leave the shelves in the refrigerator so that children cannot climb inside. NOTICE! An insulating gas is used in the device (see type plate).
RPD190-218--IO-AU.book Seite 31 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 11 Troubleshooting Troubleshooting Compressor does not run (battery connection) Fault Possible cause Remedy Device does not function, Power LED does not glow UTerm = 0 V The connection between the battery and electronics unit has been interrupted. Establish a connection. Main switch faulty (if installed) Replace the main switch. Additional supply line fuse has blown Replace the supply line (if installed). fuse.
RPD190-218--IO-AU.book Seite 32 Montag, 24. Oktober 2016 5:08 17 Troubleshooting RPD190, RPD218 UTerm Voltage between the positive and negative terminals of the electronics UON Cut-in voltage of the electronics UOFF Cut-off voltage of the electronics Compressor is not running (connected to AC supply) Fault Possible cause Remedy Device does not function, Power LED does not glow Connection supply line interrupted Establish a connection. Main switch faulty (if installed) Replace the main switch.
RPD190-218--IO-AU.book Seite 33 Montag, 24. Oktober 2016 5:08 17 RPD190, RPD218 Troubleshooting Poor cooling, increase in interior temperature Fault Possible cause Compressor runs for a Evaporator is iced over. long time/continuously Cooling area insulation is insufficient (moist/wet). Compressor does not run often Remedy Defrost the evaporator. Adjust/replace the door seal. Ambient temperature too high – Insufficient ventilation Move the refrigerator to another location. Condenser is dirty.
RPD190-218--IO-AU.book Seite 34 Montag, 24. Oktober 2016 5:08 17 Technical data 12 RPD190, RPD218 Technical data RPD190 RPD218 Capacity – total: 190 l 218 l Capacity – freezer compartment: 44 l 44 l Connection voltage: Power rating (AC): 12 Vg or 24 Vg 100 – 240 Vw, 50 – 60 Hz 65 W 70 W Rated current 12 Vg: 24 Vg: 100 Vw: 240 Vw: Power consumption at ambient temperature of 32 °C, +3 °C refrigerator: 9.6 A 4.5 A 1.2A 0.5 A 240 Vw: 0.886 kWh/24 h 12 Vg: 3.1 Ah/h 240 Vw: 1.
RPD190-218--IO-AU.book Seite 35 Montag, 24.
RPD190-218--IO-AU.book Seite 216 Montag, 24. Oktober 2016 5:08 17 BENELUX Dometic Branch Office Belgium Zincstraat 3 B-1500 Halle +32 2 3598040 +32 2 3598050 Mail: info@dometic.be BRAZIL Dometic DO Brasil LTDA Avenida Paulista 1754, conj. 111 SP 01310-920 Sao Paulo +55 11 3251 3352 +55 11 3251 3362 Mail: info@dometic.com.br DENMARK Dometic Denmark A/S Nordensvej 15, Taulov DK-7000 Fredericia +45 75585966 +45 75586307 Mail: info@dometic.
