By Dogtra Remote Controlled Dog Training Collars Owner's Manual Please read this manual thoroughly before operating the Dogtra ARC Handsfree training collar.
Product Safety and Health Statement Proper e-collar use Dogtra e-collars are intended for the sole purpose of behavior modification of dogs. They are NOT intended for human use or use on other animals. Dogtra Company does not assume any liability for the improper use of a Dogtra e-collar. Aggressive dogs Dogtra highly recommends consulting a dog training professional when using an e-collar to correct dogs that are aggressive towards other dogs or people.
Table of Contents At a Glance......................................................... Main Features of the ARC Handsfree......................... Overview............................................................ Understanding Your Training System 1. How to Turn the ARC Handsfree On/Off............... 2. How the Transmitter Buttons Work...................... 3. Handsfree Operation....................................... 4. Collar Fitting ................................................ 5.
Main Features of the ARC Handsfree Overview Handsfree Remote Controller Antenna Waterproof Egnormic Slim Receiver Rheostat Intensity Dial Checkered Grips on the Handheld Transmitter Rheostat/Volume Style with Stimulation Levels 0~127 3/4 LED Indicator Light 3/4 - Mile Range Nick/Constant/Non-Stimulating Pager Vibration Modes Enhanced Contact Points Pager Button On/Off Switch (Mode Button) LCD Screen Nick Button Constant Button Belt clip LCD Screen Belt Clip On/Off Magnetic Red Dot Battery Cha
Understanding Your Training System 1. How to Turn the ARC Handsfree On/Off To turn the transmitter on, hold down the blue button on the right side of the transmitter until the LCD screen illuminates. To turn the transmitter off, hold down the blue button on the right side of the transmitter until the LCD screen shuts off. When the LCD screen displays "OFF" release the button.
2. How the Transmitter Buttons Work The ARC Handsfree unit has four buttons on the handheld transmitter (one on the face of the transmitter, two on the left side, and one on the right side). Nick Button Constant Button Pager 3. Handsfree Operation The Handsfree uses the handheld transmitter as a long distance repeater. Using the handheld transmitter as a repeater requires the Handsfree to be within a range of 5 meters of the transmitter.
Fastening the Handsfree Strap The Handsfree strap can be fastened to your fingers, wrist, palm, or around a gun stock. Refer to the following fastening instructions. 1. Wrap the strap around the object you are attaching to and through the lower section of the buckle. Use the notch that keeps the Handsfree securely in place. 2. Loop the strap back through the top section of the buckle. Changing the Handsfree Stimulation Mode The default setting for the Handsfree button is the Constant stimulation.
4. Collar Fitting 6. To Maximize the Distance The receiver/collar should be fitted so that the surgical stainless steel contact points press firmly against the dog’s skin. When properly fitted, you should be able to fit a finger or two snugly in between the contact points and your dog’s skin. When properly fitted, the receiver/collar should not move on the dog. The best location for the receiver/collar box is either side of the dog’s windpipe. The Dogtra ARC Handsfree has a 3/4-mile range.
7. The LED Indicator The LED indicator flashes every 4 seconds when the receiver is on and ready for use. The LED indicator will blink on both the transmitter and the receiver when the transmitter buttons are pressed. 8. Charging the Battery The LED indicator color indicates the battery life level. Green = Fully charged, Amber = Medium, Red = Needs charging. If the unit is used while the LED indicator is red, it will shut down automatically. The Dogtra ARC Handsfree uses Lithium-Polymer batteries.
1. Attach the charging cables to both the transmitter and receiver, as shown on page 16. 2. Plug the charger into a 120-volt wall outlet or if using the accessory field charger, plug into a cigarette lighter only for Lithium-Polymer batteries (use a 230-volt European charger for Europe.). When properly plugged in, all indicator lights should glow red. During the charging process, the unit will shut off.
if you turn the rheostat intensity dial, the level on the screen may not change but the actual intensity from the receiver/ collar will change in agreement with the dial. In this situation, it is ideal to either wait until your transmitter is back to working order before emitting a correction, or while holding the constant button down slowly turn the Rheostat Intensity Dial while watching your dog’s reaction.
General Training Tips Getting started with your ARC Handsfree Your dog must know some very basic obedience commands before beginning training with the ARC Handsfree. A dog learns by first being shown a command, followed by lots of repetition over an extended period. As the dog becomes proficient at these commands, the trainer can introduce distractions and different locations to strengthen them.
Maintenance FCC Warning Basic maintenance Be sure the rubber-charging cap is securely in place when the collar is in use. After each training session, carefully inspect the unit for any missing parts or damage to the casing. Damaged or broken casing may affect the waterproof guarantee on the unit. After confirming that there is no damage to the casing, rinse the receiver/collar and clean out any dirt or debris. This device complies with part 15 of the FCC Rules.
Troubleshooting Guide 1. My dog is not reacting to the collar. - Make sure the receiver/collar is turned on. - Be sure the strap is on the dog tight enough so that both contact points are touching the dog’s skin. - The contact points may be too short for your dog’s thick or long coat. To place an order for longer contact points, please contact Dogtra or a Dogtra dealer.
WARRANTY AND REPAIR INFORMATION 2-Year Limited Lifetime Warranty Dogtra Company provides the original purchaser with a 2-YEAR WARRANTY for the 175NCP, 180NCP, 200NCP Gold/C Series, 210NCP Series, 280NCP/C Series, 300M Series, 1400NCP Series, 1500NCP Series, 1600NCP Series, 1700NCP Series, 1800NC Series, 1900NCP/S Series, 2000T&B Series, 2200NCP Series, 2300NCP Series, 2500T&B Series, 3500NCP Series, SureStim Series, ARC Series, and the EDGE RT. The warranty begins from the date of purchase.
Procedure for Repair Work If the unit is malfunctioning, please refer to the “Troubleshooting Guide” in the Owner’s Manual and call customer service at 1-888-811-9111, for technical support, before sending it to Dogtra for Service. The cost of shipping products under warranty back to Dogtra is the customer’s responsibility. Dogtra is not responsible for units damaged or lost in transition to Dogtra. Dogtra is not responsible for loss of training time or inconvenience while the unit is in for repair work.
