Instructions / Assembly

DocaPole 30ft Camera Swivel Adapter Kit Assembly
Instructions
1. To adjust extension pole length, raise thumb levers
and pull out pole segments to desired length, then
lower thumb levers to lock into place
2. Screw the Camera Adapter onto the Metal Tip of the
Pole. If you need the attachment to be at an angle,
unscrew the dial on the side of the adapter and
adjust the tip as desired, then screw the dial until
tight. If further angle adjustment is needed, use the
included Hinge Tip attachment for even more
possibilities (be sure to tighten the dials on the
Camera Adapter and Hinge Tip!)
3. Use the included allen wrench to tighten the set
screw on the side of the adapter, then attach your
camera/flash/microphone
4. Enjoy your DocaPole and Camera Adapter Kit!